Dupli-Color FP101 Gray General Purpose Sandable Scratch Filler and Primer - 11 oz.

Dupli filler works great I've use it to do my interior door trims works great

All the product seem to exit the can nicely.

Pros: goes on easy, sands well and cleans up very nicely. Works great and has a nice smooth finish Cons: Cost a little more than the cheap stuff but worth it This is my goto stuff for 3d prints. They often have layer lines or imperfections and this covers them well and really easy to sand. I use WAY less sandpaper than with the cheap stuff which alone is worth it.

This is definitely really nice quality primer. Nozzle was an absolute dream, sprayed well and not tiring, and the primer is good quality. Went on well, dried well, and smoothed down well. Used it for a guitar.

You will like it. I prep sanded, laid this down, and painted straight on it with minimal scuffing. The paint looked great, This primer dried fast, and I used it over encapsulator under light bondo. I did a full side of a Bronco from bumper to bumper, from the bottom 1 foot of the truck and the bottom short strip of the tailgate. I have about a quarter of the can left, and I put probably 2 coats over the whole thing, and then 3 or 4 coats over the work area. I also had a can of other "grey" product, and I liked this Dupli-Color best. It really was a good primer.