ELECROW Portable Monitor, 10.1 Inch Touch Screen Monitor 1280×800 IPS Mini Monitor, Raspberry Pi Screen Compatible with Raspberry Pi 5/400/4/3/2/Zero/B/B+, Win11/10/8/7, Jetson Nano

Bought one of these a year ago to go with a 49 inch screen as a additional way of watching YouTube and content without having to switch off gaming, recently picked up another for my setup in another room and works very well. It small form factor, ease of setup only taking a couple of seconds to plug in and Touchscreen being so good are massive plus for the product. It's got the bonus of being a good resolution and the quality being so good for the small nature is even better. It also works for smaller computers as a backup monitor like raspberry pi. Do recommend!

This is not super cheap, but I was still pleasantly surprised by the quality. Does what it says on the tin, bright and crisp and the touch seems to work fine. Having the connectors on the back rather than the side helps keep the wires hidden. The only down side was that I had to I make my own stand because the legs supplied are rubbish!

The whole product was packed well, from the outer box to all the inside bits, in shock proof bags where needed, extra screw if you want to mount it or attach a PI to the rear end, the port being on the read but going sideways is a nice feature allowing you to mount to a wall and not stick out too much, overall picture quality seems Good, and I say good on a scale of 1-10 being a 6 or 7. for the price it seems to do nicely and would be great for a PI or an extension small screen for a Computer. Unfortunately I purchased this as I wanted to wall mount a CCTV setup on the wall and decided to go for a small, compact screen that can be mounted with touch features so I don't need a mouse to navigate. The bad news was that plugging the required cables into the back and into my CCTV box the touchscreen DOES NOT work. I believe the touchscreen only works with required linked items... e.g. a Raspberry PI with the correct info files, or a PC that can activate the touch screen. I have noticed when connecting via the USB ports of the CCTV box I can plug in the micro USB into ether the Power port or the Touch port on the screen and both will supply power to the screen so both are not required it seems. But no matter what cables I tested and if I tried 1 cable or 2 cables in at the same time the touch does not work on my current Sannce CCTV box. I am unsure if this is something the monitor can maybe update at a later date or on future models or if this is the CCTV box not compatible with touchscreen. Due to this issue I have opted to give 3 star overall, this is a personal opinion based on my current situation of purchase and its use. It could be an easy 4 or 5 star for others using it for anything other than CCTV setups.

A very capable little display, works well with a Raspberry Pi. The so-called stand is rubbish, so I mounted a phone stand on the back instead. This works much better. Where it says "backlight", there's a tiny button you can only detect by running your finger across the top. This cycles the backlight intensity level. The display will still work with the backlight at its lowest setting, and it'll use less power that way. Resolution is higher than I needed for my purposes. Of course, with high resolution, you'll need to increase your text etc size, and if you don't want that, it can be easier to stick with a lower resolution. Lower resolutions also save power, as the computer attached doesn't have to work so hard. If I had to criticise, I'd say it could do with a better manual, and it needs a lot more mounting points on the back. You could improvise gluing clip fittings to it - which I suspect I'll end up doing. Although I suspect it's probably safe to drill shallow holes in the thicker parts of the backplate, I don't want to risk that myself.

Good build quality and a great screen with a high ppi (>180). Perfect for use as a pc sensor panel in my case. It's Mini HDMI so it's basically a second monitor and the usb-c is enough to power it, so it turns on and off with the pc. It's got built-in speakers but you can mute these in the settings. Never used them but I don't expect them to be very good. Time will tell. But so far 5/5

This is an excellent monitor for the Raspberry Pi 5. No config changes needed and everything just worked including the touchscreen. The instructions suggested you might need to change some details in a config file but this was not the case with the Pi 5 and latest OS. The touchscreen is responsive and accurate and the image quality is excellent. I'm using it to display a smart hone dashboard Sharp Tools and its perfect. There is an adjustable brightness button allowing the screen to get really bright, but I set it to 20% which is plenty for my use case. The stand which comes with it isn't great but I 3D printed one out to fit. The included cables are a little long when using the Pi mounted to the back but I changed them out for shorter ones and glued cable tie anchors to the back of the screen for cable management.

Absolutely rubbish

Perfect! Made a diy streamdeck and its works like a charm

Il monitor touch screen ELECROW da 10,1 pollici è un prodotto eccellente per chi cerca un display portatile e facile da usare. Lo schermo IPS HD offre colori vividi e un ampio angolo di visione, mentre il supporto multi-touch a 5 punti è reattivo e intuitivo. Con un peso di soli 521 grammi e dimensioni compatte, è facile da trasportare. La struttura in acrilico metallico assicura robustezza senza appesantire, rendendolo ideale anche per piccoli spazi. Compatibile con vari dispositivi grazie alle porte HDMI e USB, si collega facilmente a PC, Raspberry Pi, console e altro. Il design plug and play semplifica l’installazione, e i fori sul retro permettono di montare il Raspberry Pi, perfetto per progetti fai-da-te.

Uitstekende monitor, vlijmscherp beeld. Wel wat prijzig (voor hetzelfde geld heb je een 17” monitor). De losse sokkel is wat primitief, instabiel en geen pluspunt. Het touchscherm werkt prima.

I connected this to a Raspberry Pi 4B and it's working great! Took a bit to get the RPi to see it properly, but I plugged into a 5 and it worked perfect. On the 4, the older drivers just needed a quick update. (config.txt). Touch is responsive and consistent across the face, and it looks great. I used the screws on the back to mount the RPi as well - worked just as it should.

Bought together with a Zoeley tablet holder be used as controller for an audio system, too early to speak about reliability. Concerning the main purpose, its working without flaws with a Raspberry Pi 4, running Volumio music player software, touch function very handy to give commands and get the virtual keyboard for music search. Don’t forget to used the configuration settings on manual to get proper image from Raspberry. Missing a power on/off button.