Milomdoi [3+3 Pack] UV for Samsung Galaxy S23 Ultra Screen Protector Tempered Glass Accessories Samsung Galaxy S23 Ultra 5G 3 Pack Camera Lens Protectors Case Fingerprint Fit

To be completely transparent I don't have long term use experience with this Milomdoi screen protector. I do with other brands but time will tell if this exceeds the lacking long term performance of the others. As far as installation goes, this was probably the easiest and most problem free experience yet. The first try came out perfect. While some of the experience had to do with me just getting more experience with these types of screen protectors most had to do with the tray and its spacers as well as the UV light. All of the other brands I tried was $25 and up yet either had a less precise tray and spacers for alignment or a much weaker UV light. The Milimdoi tray has a built in level which was extremely helpful preventing the easiest mistake to make. The included spacers did a great job making sure the screen protector was centered which was an issue with a couple of the expensive brands I tried. What might have actually helped the most though is the UV light. This one is very bright compared to my others. I think my old Whitestone one came the closest but all others had about a 2.5watt power draw while this one is 6 watts. What little glue that leaked out cured much harder than any other I have tried before. So far the screen protector seems to be working well with my case unlike all of the others thanks to the thi gs mentioned. Having it centered is very important with case fitment and having a strong glue is equally as important. While a case me be fine initially it can lift edges when it is pressed against during use or even more so in a pocket. With my current case I struggled getting any brand to not lift at a corner because of the case but so far this has already exceeded those others. For $11 you can't go wrong and won't find a better or even equal option. I am going to buy a couple more just incase the price returns to normal so I have backup. At best I was getting 3 months of use for other similar protectors so if I can get that then I will be happy. My only complaint about the Milomdio screen protector is the feel. While it seems to be more resistant to fingerprints than most others I have tried, it also has a slightly more "sticky" feel. My favorites had an amazing slick feel that was great for games. This isn't as nice in that regard but in no way is it near the "sticky" feel of the film protectors. It's perfectly acceptable and doesn't negatively impact the feel of the S pen. I actually really like how the Spen feels with this one. Last but not least is the fingerprint scanner. This is an area I struggled with a lot with the other more expensive options. Poor performance is normally a result of poor installation so it was no surprise to me to have the best experience I have had with this screen protector. I can always get these UV protectors to work well without enabling the increased touch sensitivity option but normally I need to add multiple scans of the same finger to get reliable unlocks. That wasn't the case here. Even without the extra sensitivity enabled this works just as well as when there's no screen protector on my phone at all. It is flawless but Like I mentioned earlier a lot of that performance has to do with your installation. Most other decent brands will perform just as well if you nail the install. Thankfully this kit gives you the best chance at doing that compared to many others. At the current price these should be flying off the shelf. Don't let the current amazing price fool you into thinking there's something not right here. This is of the same quality if not better than the others at $25 and above. Nail the install and you'll be pleased.

First off, I was a bit skeptical of this kit before ordering due the perceived complexity of installation. I followed the instructions to the letter and was done in minutes. The longest part of the installation was curing with the UV lamp. I did the procedure twice as I wanted to make sure it really cured. I was amazed at the results as everything looked and worked perfectly. It lasted 84 days prior to me dropping the S23 Ultra and cracking the protector. The impact was such that it also cracked the Otterbox Defender case, which was replaced under warranty. That said, I'm happy with the performance and durability of this protector. I just got done installing the second protector and it went on very easy and perfectly, but I missed wicking up all the glue before curing and had some residue I tried scraping with a razor blade. I got to close and lifted the protector, so I pulled it off to start over with a new one. This was all my fault After reading the reviews, I did a few precautionary things such as taping both ends of the phone so the glue won't enter any holes. Liquids and electronics don't play well together. Also, I can't stress enough how important it is to keep everything perfectly level. I did the UV curing process twice for peace of mind, but it probably isn't necessary. Just take your time and don't rush and you will have a perfect installation. I highly recommend this product as it lives up to the advertised claims and is Otterbox Defender case compatible, its ease of installation and durability. And the low price for the kit is unbelievable. I purchased two more kits after I installed the first screen protector just in case they discontinue the product. Gotta keep spares just in case.

I have used these style protectors on my last two galaxy phones. This brand worked at first way better than the last brand I used on my S21 Ultra. Unfortunately the protector starts popping off almost immediately as if it doesn't matter if there was UV cured fluid underneath at all. Replaced it twice already and now moving to my 3rd of the pack. Doesn't appear to stay on sturdy. I liked it because it was greatat maintaining touch sensitivity and use of screen fingerprint scanner. It looks like there is no screen protector on it at all. (I use it with a Spigen thin case which is my go to case brand, for enough corner drop protection but maintaining thinness of phone. This screen protector is the front drop buffer) Another brand of UV curing screen protector I used on my S21ultra before never quite worked right and my fingerprints always messed up so this one gets an A+ for ease of install, mess free install, functioning just like the original screen and touch sensitivity. I appreciate the 2 extras so you have 2 more in case you need to do more installs in the future. Highly recommend. (Install note for people who complain it's messy or hard. I get it but be patient, work slowly and cleanly and watch the videos please.. The very first time I ever used this type years ago it was a bit messy. Once you watch the video and do it carefully it is clean, solid and easy to install.)

This is the best fastest easy to install screen protector I have ever put on my s23 Ultra. It is bubble free. As a bit of a note use m3 masking tape across the bottom and top instead of the plugs as it is less likely to pull the screen off as the plugs could get wedged under the screen and pull it off. This was the case in first attempt. Second attempt I used masking tape with no plug in the frame. It is easy to position the screen protector as the glue remains liquid forever under the screen giving you complete buble free and the ability to line it up perfectly where you want it with just sliding it and using the little wight. Another tip is that the amount of glue in the tube's is just enough so make sure you use it all to make a gob in the middel of the screen. The rest is easy as it is easy to slide and line up with the little wight in the middel of the screen. Wipe the glue around the edges if needed before using the uv light. Once line up and you have no bubble use the uv light. It drys the glue. If there is any glue dry around the edges it comes off easy with just your finger nail. Just be careful around the edges of the screen protector as to not lift it as if you do you will have to start over and apply a new one. As far as I can tell this is the best way to apply screen protectors without bubbles and is fast and easy. The glue comes off easy but sufficiently sticks the screen well to the phone. Also M3 masking tape works best by the buttons and top and bottom ports on the phone so you don't get it in the ports or buttons by accident and actually is highly unlikely as there is only just enough uv glue for the screen and the glue likes to spread evenly under the screen and does not come out of the edges easily. I was scared at first, but it turns out it is actually rally safe and works the best out of all screen protectors.

I've tried multiple difference tempered glass screen protector for my S23 Ultra and this one by far succeeds the rest!!! With the alignment tray and guides the fitment comes out perfectly every single time with no bubbles and the fingerprint scanner still works as if there's nothing on the screen. I will note to make sure you wipe up any glue oversell before curing, I had a bit cling to a guide and pull up the screen protector upon removal, I chalk this up yo user error.

So I tried it the first time. It didn't work. After just a few weeks the edges start to have bubbles. I purchased the second time as I thought this product is promising. History repeats itself. The edges start to have bubbles. I do not recommend this product.

This is best screen protector I found for s23 ultra. Very nice and proper fitting. Glue is very strong. The phone holder was well designed and I did not get any scratch. It's also had bubble scale that helps to keep phone alignment straight.

I like the product although the sticker on the underside of the glass is a hassle. I'm not even sure why it's there. You have to carefully remove a sticker that ended up leaving residue on the glass. I had to very carefully try to clean it off while the glue was already sitting on my phone. It was super hard to get the smudges off while being extremely careful not to break the glass.