JONSBO D41 MESH Black ATX Computer Case, ATX/M-A.TX Mainboard/Support RTX 4090(335-400mm) GPU 360/280AIO,Power A.TX/SFX: 100mm-220mm Multiple Tool-Free Design, Black

The JONSBO D41 MESH SC is a sleek, high-performance ATX mid-tower case that pairs style and functionality, delivering a compelling choice for builders looking to house powerful components like the RTX 4090. Here’s an in-depth look at what it offers: Design & Build Quality The D41 MESH SC exudes a minimalist yet sophisticated design with its full black color and fine mesh front panel that strikes a balance between aesthetics and functionality. The mesh design not only adds a modern look but also allows for excellent airflow, making it an ideal choice for high-powered setups. The build quality is solid, with sturdy materials that feel robust and well-crafted. The addition of a customizable screen on the front panel is a unique touch, giving users the ability to monitor temperatures or display personal animations, adding both style and utility. GPU & Component Compatibility This case shines in terms of compatibility. It supports large GPUs, including the massive RTX 4090, with an allowance of up to 400mm in length, so you won’t need to worry about space constraints for high-end graphics cards. With ample room for cooling, you can install either a 360mm or 280mm AIO cooler, which is essential for builders looking to push their system to the limits. The case also supports both ATX and SFX power supplies ranging from 100mm to 220mm, giving you flexibility with your power solution without compromising on space. Tool-Free Design & Ease of Build The D41 MESH SC features a mostly tool-free design, making installation a breeze. This design is particularly helpful if you plan to frequently upgrade or swap out components, saving time and reducing hassle. The case provides adequate cable management options, which helps keep your build neat and optimized for airflow. Cooling & Airflow The mesh front panel and spacious interior allow for excellent cooling potential. With support for multiple fans and large radiators, the D41 MESH SC can handle demanding setups while maintaining cool temperatures. Its airflow design is efficient, and paired with the mesh front panel, it provides natural ventilation to keep temperatures down, even with high-performance components installed. Screen & Customization The front panel screen is a standout feature. You can customize it to display hardware stats, system temps, or even animations. This feature not only adds a personalized touch to your setup but also provides real-time feedback on system performance, making it both functional and fun. Pros: Sleek, modern mesh design with solid build quality Supports large GPUs, including the RTX 4090 Excellent compatibility with ATX and SFX power supplies Tool-free design simplifies installation and upgrades Customizable front screen for monitoring and personalization Cons: Mid-tower size might be bulky for some setups Limited RGB customization options (depends on preference) Custom screen could use more integration options with third-party software Verdict: The JONSBO D41 MESH SC Black ATX Computer Case offers exceptional value and versatility, especially for users looking to build a high-performance system with ample cooling and GPU compatibility. The tool-free design and customizable front screen elevate the build experience, and the stylish mesh panel supports both airflow and aesthetics. This case is ideal for enthusiasts who want a practical, durable, and visually striking case without sacrificing performance. Overall, it’s a strong choice for anyone looking to house powerful components like the RTX 4090 while keeping things cool and stylish.

This was my first PC that I built, and this case made it relatively easy. I struggled with cable management a bit, but I will chalk that up to my own lack of skills rather than the case's fault. There is a large channel in the back where most of your cables can fit, its more a matter of getting everything tidy. The front mounted power supply is really nice, as it leaves the bottom open for intake fans and for the possibility of an atx motherboard. I used the Phantom Gaming 4 a/c, and it is a very basic board but I got everything working and fitting correctly easily. The case does have a Lightning USB port which I wasn't able to utilize, but for the price point it is a good feature. The construction felt very sturdy, and all the mesh panels were super easy to take off and access everything. Definitely purchase this when you have the chance, this is a case that can last you a lifetime. Lots of room for upgrades, whether you want a bigger motherboard, bigger GPU, or a 3 fan AIO.

It is a well made case, painted well, with good fitment, has no sharp edges and requires no more than a Philips screwdriver to build in. It is about as small as a full ATX case can be and still accept a large graphics card and a 360 AIO. Part of the reason it is small is that the PSU mounting does not require a wasteful bottom compartment. Instead, the PSU is put into a space that is typically not utilized. So the space utilization is very good. It seems clever. But one thing I didn't like was that with a roof mounted 360 rad, the PSU hot air output feeds into the 360 rad which reduces the AIO effectiveness. You can easily build a shunt/partition that will direct the PSU air to the front mesh panel (cardboard/tape would work). Unfortunately such a shunt affects the air path to AIO rad. Also the lid on the roof is meshed but fairly finely. Likewise the floor has a mesh that obstructs the floor fans. The inlet sides of the floor fans are close to the floor mesh and consequently noisier. The end result is that IMO, the design has unnecessary airflow restrictions, this matters a lot when case size (and hence surface area) is reduced but the amount of heat energy that must be vented is still high. This can be partly compensated for with higher fan speed but results in more noise. So it is well made case, small is size due to good space utilization, easy to build in but with air flow issues that result in more noise. For me, the noise was the deal breaker.

Absolutely BEST computer case I have purchased and worked with out of the many builds I have done. It really is great. Real easy to work with and loom wires. Lots of builder friendly touches and the removable 8-inch LCD front panel, which operates as an additional monitor, looks fantastic! You can display system stats on it or run animated wallpapers on it (both require separate software ro do so) as I do using wallpaper engine. It's my Stormtrooper build so I can switch out different animated Stormtrooper-themed wallpapers to whatever suits me that day and I'm not locked into looking at the same case every day.

Case Jonsbo D41 Excellent boitier d'ordinateur très bien fait facile à monter et à installé les composantes avec une bonne ( Ventilation ).

SUPER GENIAL

Opened box 1 minute and question myself, what can a $245 case be such worse! This is the one! 1 The back panel can not even close, fall off every time! 2 Cheap made steal, I don't even want to touch it anymore 3 The quality is not match a $70 Cooler master case Updated: A cheap made case should be matched its price. For a $249, Jonsbo shouldn't use such cheap quality material, it's a shame. * DO NOT BUY*

Très agréablement surpris ! Qualité / prix , difficile de faire mieux. J'ai mis des ventilos rvb et tout est rentré nickel on peut même ce permettre certaines modifications si besoin. Le petit écran, c'est un gadget mais désolé c'est ce qui à attiré mes yeux. Et ça fonctionne super bien une fois que l'on a passé des heures pour comprendre comment faire, mais ça c'est autre chose. Pour un set up standard même avec une grosse CV , ça passe tranquille et cela reste une moyenne tour. Le produit est bien fini et on sent une bonne qualité. C'es du Mesh donc pas de soucis de refroidissement. Un watercooling, pas de soucis ça rentre !. Personnellement pour remplacer une vieille grande tour, je suis vraiment content de cette tour qui à tout repris et en version plus petit. Je recommande vraiement.

Bonjour à toi qui va lire mon commentaire sur le sujet de ce boîtier modèle D41 MESH SC. Cette tour de type moyenne est vraiment polyvalente, mais du coup pourquoi pas 5 sur 5 ? Concernant la configuration tu pourras mettre à l il n aura pas tellement de problèmes car tu pourras installer un watercooling de 360 sur le haut du boîtier sans soucis de même une grosse carte graphique à 3 ventilateurs passera sans aucun problème. Les quelques branches de l'étoile que je retire sont : 1* Pas de filtre sur la face avant du boîtier et aucun ventilateur inclus 2* Pas assez de profondeur au niveau du passage de câble. Car tu veux tout simplement installer ton contrôleur fan ou voir RGB et qui fait plus d'un centimètres la porte ce fermera pas. 3* Pas la possibilité de déplacer la cage des disques. 4* Tu dois faire un choix entre mettre un ventilateur en 120 sur la face avant du boîtier ou de conserver la cage des disques de stockage des HDD 5* Connectique trop faible sur la face avant, il un USB et un type C. J'aurais preferer en plus un bouton reset, 2 USB 3.2 en plus, ce qui aurais était cool ! Pour ceux qui veulent en savoir plus ou/et du visuel, tu peux te rendre directement sur ma chaîne pcsouris sur youtube.