Desertcart purchases this item on your behalf and handles shipping, customs, and support to Iceland.
🔥 Elevate your mini setup with BIGTREETECH’s sleek 5" touchscreen — small size, big impact! 📺
The BIGTREETECH 5-inch HDMI Touch Screen Display delivers a sharp 800x480 HD resolution on an IPS panel with a wide 160° viewing angle. Designed for seamless compatibility with Raspberry Pi, Sovol-SV08 3D printers, PCs, and other HDMI devices, it features 5-point capacitive touch, adjustable brightness and orientation, plus built-in audio output via a 3.5mm jack. Compact and versatile, it’s the perfect monitor for tech enthusiasts craving a stylish, functional mini display.
| ASIN | B0BC4CPDC3 |
| Adaptive Sync | FreeSync |
| Additional Features | Touchscreen |
| Aspect Ratio | 1.66:1 |
| Best Sellers Rank | #48,787 in Electronics ( See Top 100 in Electronics ) #1,133 in Computer Monitors #1,265 in 3D Printer Accessories |
| Brand | BIGTREETECH |
| Color | Black |
| Compatible Devices | Raspberry Pi4, PI4B+CB1, BTT PI, Manta M8P+CB1, Manta M4P+CB1, Manta E3EZ+ CB1 |
| Connectivity Technology | HDMI |
| Contrast Ratio | 1000:1 |
| Customer Reviews | 4.2 out of 5 stars 35 Reviews |
| Display Resolution Maximum | 800x480 |
| Display Technology | LCD |
| Display Type | LCD |
| Hardware Connectivity | HDMI |
| Image Contrast Ratio | 1000:1 |
| Included Components | BIGTREETECH 5 inch HDMI Touch Screen |
| Manufacturer | BIGTREETECH |
| Model Name | 5 inch HDMI Touch Screen Display |
| Model Number | KINGPRINTER-1040000034 |
| Mounting Type | Wall Mount |
| Native Resolution | 800 x 480 |
| Number of Component Outputs | 1 |
| Picture Quality Enhancement Technology | freesync |
| Pixel Pitch | 7.71 |
| Resolution | HD |
| Response Time | 5 seconds |
| Screen Finish | Glossy |
| Screen Size | 5 inches |
| Screen Surface Description | Glossy |
| Shape | HDMI 5' |
| Total Number of HDMI Ports | 1 |
| Unit Count | 1 Count |
| Viewing Angle | 160 degrees |
| Voltage | 5 volts |
A**W
not bad at all
screen looked just fine but i ended up returning it because i went with the 7 inch instead
M**M
EXACTLY WHAT I NEEDED !
this is exactly what I needed for my RasPi setup. my partner had gotten me a small phone stand 3D printed to look like a nether portal. I thought it would look so sick as a monitor stand for my RasPi with the purple blocks as the background/screensaver. I needed a monitor that had a width of just under 3 inches to fit in the stand, have ports on the short end, and be less than a half inch thick. it fits SO PERFECTLY. the top bit of the frame hanging off is due to the thicker HDMI cord I have, which I plan to swap for a thinner one. so if you're looking for dimension specifics of the 5" monitor -- it is just shy of 3 inches on the short side, slightly less than 1/2 inch thick, and if you're techy enough to be getting a monitor this small you can do pythagoris from there to figure out the long side from a ~5" hypotenuse ;)
A**W
Works great out of the box with Pi3 and Pi4 on latest OS
I wanted a screen I could plug in with a wireless keyboard to quickly reconfigure otherwise-headless devices that might have misconfigured wifi or whatnot. Some screens require reconfiguration in config.txt or physical attachment to the Pi. Not this screen - it works perfectly out of the box with only a USB and HDMI connection to the Pi, and no OS reconfiguration. Looks great, touch is good, and it totally satisfies what I need!
K**R
Works fine. Have tiny fingers
Works fine
M**P
Works like it says happy
Got it for my Sovol s08 and it great I'm very happy with it
V**.
It's ok but causes issues
Would love to use it but my printer loses Wi-Fi if it's plugged in. Slightly better with a higher amperage going to my pi but still an issue.
B**K
JUNK!!
Piece of Junk, I should ask for my money back...unfortunately I had a plane to catch early the next morning. DO NOT BUY!!
K**T
Works awesome
Works awesome with the Sovol SV08 or any Klipper printer!
J**N
Works fine.
My hdmi5 v1.1 display died after 2 years. This replacement is actually a v1.2 so the connections are not as pictured in this listing. Not complaining, just an FYI.
S**R
Awesome HDMI touch screen!
Great HDMI touch screen. Not just for 3d printers!!
D**.
Works. Usually.
Usually works well. A couple of times (over many months) I have found the display filled with static, but unplugging and plugging it back in seems to recover things. Not sure what's going on there. The touch screen function is impeccable. Note: I received the latest (at the time) V1.2 version. The product details in the Amazon listing reference the V1.0. There is a difference in the positioning of the ports and switches so the V1.2 will not fit an enclosure designed for the V1.0.
C**A
It sorta works
The HDMI provided wasn't working and same goes for the USB C cable. We had to use our own cable just to get it to work
Trustpilot
2 weeks ago
1 month ago