RackChoice 2U Server case Micro ATX Compact Rackmount 2 x 5.25 Chassis Support ATX PS2 PSU with 120mm Fan on top, USB3.0 with 2.0 Adapter

The case is built well. The bays for the drives and fans are removable for easy installation of drives and fans. The included fans plug into the power supply. You need to buy fans that plug into a motherboard if you want to go that route. Power supply is not included. Regular/Standard ATX power supply fits. MATX motherboard fits well with a little space between it and the drive bays and power supply. Not sure if you could fit 4 HDD drives. But you could probably fit 4 SSD drives. I am using Nvme drives. The case mounted on my rack case with standard wholes and screws.

Pros: vents on top for power supply, racks well if you stack it on another server that's racked in with rails, decent build quality cons: not much room, I'm currently doing this one with 6 SSDs and it's a little cramped with all the wiring. If you're using more than a single large spinning drive, i wouldn't recommend this chassis. Default fans are kinda cheap, buy 2 80mm Noctua fans they're much quieter hard drive mounts are really built for larger spinning drives, SSDs don't have much mounting options outside of just laying them inside the chassis somewhere

I am giving this 5 stars due to the build quality and the price. That is not to say its not without its flaws, but these are not issues I had to deal with in my build. Good: Price! Quality Build. Cons: A couple of gripes, but any of the changes I would recommended would likely drive the price up beyond its sub $100 price point. Gripe 1.) There are two, 80mm fans at the front. These use Molex adapters (Blah!). I already planned on replacing these with a pair of Artic or Noctua fans for better performance. The location of these fans make it impossible to service them without taking the system apart. They sit between the front vent and the HDD Trays, but tucked under a lip of the front of the case. So to get access to the fans, you would need to remove the Hard Drives Gripe 2.) Same thing with the filter, it is tucked away in an out-of-reach place. My simple fix for this was to remove the foam filter and set it on the outside. The airflow holds it in place but I am going to 3D print a bracket with magnets to keep it there. Meh 3.) Less of a but something to be aware of. The front HDD Trays: This is a shorter chassis (What I wanted) but if you are planning on installing full size HHDs in the Trays, you will have almost zero tolerance between the SATA/Power connectors and your Motherboard. Its VERY tight. If you are going to use SSD's this may not be as big an issue. And if you are like me and not planning on using the trays at all, then hey no issues. I plan on using a couple of 5.25 bay HotSwap HHD Trays from Icy Dock, and there is plenty of room behind those and the Power Supply. Overall, great Case! Pictures: Red Arrow points to where the filter is located between the front and fans. Have to remove HDD Cage as well as Fan Assembly to access Filter, so it was relocated to the outside of the case (Also pictured). Also showing HDD / SSD Clearance.

This is a great case. Well built and room for everything you need. Even the low profile 4060 I have fit perfectly. My only gripe is 2 of the screws to take the hard drive cage out are hard to get unless you have a long Philips.

It was nicely laided out. The case was easy to work with.

Easy to install in rack, smooth fit, great value, plenty of room for good cooling. Sturdy case & functional

I bought one and really liked it so I bought two more. I use these in my Promox server cluster. The 2u space saving really freed up room in my rack. Love having the 2 5.25" drive bays for hard drive expansion. All in all a great case, just make sure you are buying a micro sized motherboard for this as a full size motherboard will not fit due to power supply placement. I may have to tame those bright blue power lights however! I would definitely buy another!

It's a nice case. Well put together. Not bad for the cost. I would have preferred 6 cover screws instead of just 4. As other people have reviewed, the issue comes when installing the HDDs. I guess this depends on the layout of your motherboard. On mine the right side bracket can't be used at all because the drives will cover the main ATX power header and get in the way of the memory cards. Maybe a single SSD at the top position but no full size drives. To mount on the left I had to put the larger drive at the top. For mounting the smaller SSD, I had to drill new mounting holes to shift it to the left (and then cut the corner off the mounting plate. Everything was in the way of the USB(3) header. Any one who can't make modifications should stay away from this case.

buen producto, buen precio

An excellent case for my little UniFi Controller and Pi-Hole build: Noctua NH-L9a-AM4 2x Noctua NF-A8 PWM to replace existing fans. AMD Ryzen 3 2200G Gigabyte B450 M mATX 16GB Corsair RAM 1TB M.2 ThermalTake 550W PSU Removed the drive 3.5” carriers. Very sharp corners and edges; be careful as you build. Strong fixed brackets, no issues with just 4 screws. Fits in shallow rack; inserts into rack just over 380mn deep. It would have been nice to include 10/32 Screws for mounting. And, perhaps a cover for the power and rest switches. I designed a cover that fits in the USB ports to prevent the switches from being accidentally actuated. I’m looking to now make a 3U build for my UNRAID Server.

Los puertos frontales USB a veces no hacen bien contacto, dependiendo si es Memoria o el Cable del teléfono.

Some sharp edges but otherwise some good tolerances. Bought a couple hot swap 2.5" bays to make this a 12 drive beast of a 2U unit. Decent airflow. Make sure you get a good quality low profile cooler. Space for a full size ATX PSU is a nice option. Swapped the fans for Noctuas, the included fans are a bit cheap and noisy. Once all together, a nice quiet low profile case.

The case is solid, comes with all the screws you'll need for a motherboard and PSU. Fits 4 HDDs comfortably. The handles are solid and fits well in a standard rack. The first change I made was replaced the two 80mm fans with Noctua ones, it made a huge difference. Also the power LED is extremely bright - you cannot look directly at it. I put a 5.1k resistor on that wire to reduce the brightness.