ArmorPoxy Garage Epoxy Floor Kit – 100% Solids - 2 Part Industrial-Grade Coating w/UltraGlaze Topcoat | DIY Slip & Hot Tire Resistant |300 Sq Ft - Designer Gray - 17 pc kit

Wear a respirator! Epoxy fumes are toxic and just having your garage door open is not enough! perfect all in one kit, easy to follow instructions, and beautiful looking outcomes. If you have a partner helping, I found it easier to just buy two of the smaller kits to get my square foot coverage.

After binge-watching a ton of epoxy floor makeover videos, I decided it was time to give our garage a serious glow-up—and Armorpoxy seemed like the perfect choice for the job. We’re in the middle of a full garage remodel, and this floor was the foundation (literally) of the entire vibe. Between work and life, the project took a couple of weeks to complete, but the results were worth every bit of effort. I used two kits for my standard two-car garage, and that ended up being the sweet spot to get full coverage and the finish I wanted. The product itself was solid—good consistency, easy to apply if you follow the steps, and the final look? Sleek, clean, and seriously elevated. The space already feels brand new, and I can’t stop admiring the shine and texture. I’ll be back in a year to post a follow-up and see how it’s held up over time, but for now—this kit definitely delivered. If you’re on the fence about it, go for it. Great product, great results. Brand new floor, brand new vibes.

Our garage remodel turned out great. The instruction are clear and direct removing any guesswork. The kit came with almost everything we needed. Square footage is true to size quoted. We heavily covered 800 sq ft with a 900 sq ft kit and had a small amount of product remaining. It went down easily, looks professionally done at a fraction of the cost. I’m satisfied and glad we went with this option

I highly recommend buying double of what you actually need and doing a 2nd coat before putting the flake. I prepped my concrete (it was brand new so I know there were no previous contaminants), but there are several areas that visually are not to my liking. In the past I have done my garages with a different brand and have always done two or more coats. I read the reviews on this product and decided to try just one coat. I should have gone with my gut. Lucky for me the places that I have issues with I plan to put pallet racks over so you should not see it after I get might be longings moved into the garage. Prep and application we're both very easy, the kit comes with everything you need. And the epoxy was really easy to work with. I live in a very humid climate and the clear coat was applied 5 days ago, and is still a bit tacky. But it looks like it's going to be a nice four when everything is moved in. ***UPDATE*** I haven't even parked on the floor yet, I've only been walking and remodeling the room and it's already coming up. I did all the prep work and, it was new concrete so I know that's not the issue. But don't waste your money, buy the Rust-Oleum brand. I used it in my garage at my old house and it held up great for 6 years. I just wanted to try something new and I wish I hadn't. ***Another update*** Finally moved into my new house and the first time I blow my garage out with a leaf blower it peels up! DO NOT BUY THIS!!! STICK WITH RUST-OLEUM ITS BETTER

I gave it 4 stars because I haven't had time to test the durability. Otherwise, I would give it 5 stars. This is not the cheapest option nor the simplest option, however it is the best option. Ingredients are all commercial grade and the final results will show. Final results will be based upon how much effort you put into preparing the floor prior to any application of product. You will need to throughly clean the floor (pressure wash, degrease, and acid etch) first. I highly recommend buying a good crack filler after allowing the floor to throughly dry. This is an extra step but necessary to look good and keep future debris from getting into cracks even after epoxy is applied. Use painter's tape to tape off the areas adjacent to the floor you don't want to get epoxy on. Mix a small quantity and use the paint brush to apply along sides/floor where the painter's tape is. I poured small amounts of mixed epoxy directly on floor and used roller to spread. Working from the back wall to the garage opening, continue to pour small amounts until you have covered the area. Since the directions said to complete the epoxy application within 25 minutes, I used 10 minute mark to see if I was half way done. This kept me on schedule to complete without the epoxy setting up. Put my 'slippers' on to spread the paint flecks. IMO, there is plenty of paint flecks to add to the floor. No need to buy additional flecks. Final step was to mix the non-slip additive to the clear coat and spread similarly to the epoxy. Use small amounts and pour directly to floor and spread with new roller working from back wall to garage door. I didn't paint in the edges along the wall like I did the epoxy. No need to go through this effort since the epoxy is shiny and already covers the cracks. Day one: It took me one day to prep, dry over night. Since it was a new garage, I did not have to fill crack Day two: Applied Epoxy and paint flecks, dry over night. Day three: Applied clear coat with anti-slip, dry over night.

Nice product… arrived early. Applied very easily and looks nice. One bit of advise is to use a degreaser on any oil or grease stains and then clean them well. As far as the chips are concerned, just through them up into the air and let them fall and you’ll love the job. I applied the top coat and found that it was easier than painting and 1 gallon went a long way

This kit was good and im very happy with the finished floor. Cost was more than the kits you buy from big box stores but was worth every penny.

The product was as advertised with all the parts needed to complete the job. The instructions were good. The product installed easy. The coverage was more than advertised. I had 184 square feet to cover and wanted to put two coats of the epoxy down so ended up ordering two 300 square feet kits. I was able to do the two coats of epoxy with the one kit and do four coats of top coat with one kit. I used one package of flakes for a heavy coverage which hit any imperfections. I think it turned out good and looks really nice.

The armor poxy is an amazing kit, the hardest job was the prep, i rented a diamond wheel grinder instead of doing the acid etch, and did all my basement and backyard 12x12 shed. I habe 550 sq.ft in total and the 600 sq.ft kit was perfect. I really like the finish of it. If i had to do it again i'd buy the same kit, but i would maybe put a little bit less of anti skid powder in the clear coat. I put all the bag in the gallon of clear and you really feel the anti skid, maybe a little too much. I never bought the big box epoxy kit but i'm pretty sure that the armor poxy will outlast any other cheap brand since its a 100% solid epoxy!

Nice product. It is worth the extra dollars verse the box box 2 part epoxy comparable. Sq Ft coverage coverage is pretty accurate. I had 400 sq ft so I got the 600 sq ft kit and had about 1/3 left.