Perlegear Full Motion TV Mount for 26–65 inch TVs up to 82 lbs

I’m very happy with this Perlegear TV wall mount. It feels sturdy and well-made, and the full-motion design makes it easy to tilt, swivel, rotate, and extend the TV for a better viewing angle. I especially like that it works well in corners and has a single-stud design. Installation was straightforward, and the heavy-duty steel construction gives it a secure feel. Great option for TVs

I recently installed the Perlegear Full Motion TV Mount on my 55-inch TV and the entire experience from unboxing to final setup was smooth and straightforward. This mount has completely transformed my living room setup - the TV tilts, swivels, and extends exactly where I need it with zero strain or effort. I honestly wish I had bought this sooner!

I was impressed with how straightforward this TV wall mount was to install. The directions were clear, and everything lined up the way it should. The only thing to keep in mind is you’ll want to have a ratchet or the correct hex head driver for the lag bolts—those need to be anchored into studs for proper support, and doing that by hand isn’t realistic. Once mounted, the bracket feels very secure and holds the TV flush and steady. The design makes adjusting and leveling simple, and I’ve had no issues with sagging or movement. It’s one of those products that just works the way you’d hope. Pros: Easy, straightforward installation Sturdy and secure once mounted Keeps TV level and flush to the wall Clear instructions Cons: Requires a ratchet/hex driver for lag bolts (not included) Overall, a great mount that does its job well without fuss. Solid value and performance.

The Perlegear Full Motion TV Wall Mount for Most 26–50 Inch TVs is a convenient solution for mounting your television securely on the wall. It comes complete with all the necessary hardware for installation, making the setup process relatively straightforward. Additionally, the inclusion of a leveling tool ensures that you can align your TV perfectly once it's mounted, which is a nice touch for achieving a professional-looking installation. In terms of sturdiness, this wall mount holds up well within the specified range of TV sizes. It provides ample support for TVs ranging from 26 to 50 inches, giving you confidence that your television will remain securely in place once mounted. However, one drawback is that the range of motion offered by this mount is somewhat limited. While it does provide some tilt and swivel capabilities, it may not offer as much flexibility as some users might prefer, especially for larger TVs. One notable aspect of this product is its price point, which is reasonable considering its features and functionality. It offers good value for those looking to mount their TV without breaking the bank. Personally, I purchased two of these mounts, and if needed, I would buy again. However, it's important to note that if you're unsure about the installation process, it's not fair to blame the product for any issues. Make sure you understand what you're doing before attempting to install the mount. Overall, the Perlegear Full Motion TV Wall Mount for Most 26–50 Inch TVs is a sturdy and reasonably priced option for mounting your television. While its range of motion may be somewhat limited, it comes complete with all the necessary hardware and includes a leveling tool for easy installation.

First let me say that I lack the gene that interprets written instructions into an assembled item. These things are hard for me. to do and it takes me a lot longer than it will you. Although the instructions were step-by-step, I couldn't tell which side of the extenders gets attached to the central part. I had to use a magnifying glass on the instructions. (The photos here on this listing are much better, I should have gone back here to look at them.) The manufacturer gives you several bolt sizes and lengths so that you can find the right bolt to fit the back of your TV. And if the bolt that fits is a bit too long, well you get to use a spacer. Spacers are innocent little things but I still wasn't sure how to get them onto the bolt. It will keep the bolt and mount snug together. Regarding the extenders: Don't expect the extenders to be installed symmetrically. It all depends on the size of your TV and where the bolt holes are located on the back of your TV. It'll hold the TV just fine and no one sees the back anyway. So don't tighten the screws of the extenders too tightly because you'll have to adjust them a bit. I borrowed my neighbor's stud finder and to be sure, I drilled a tiny pilot hole. Yes, it was wood. So I used the recommended 5/32 wood drill bit and drilled the two holes. Easy. It was also easy to mount the drywall hanger. Comes with a small leveler. Be sure that you have a 7/16 wrench to screen in the mounting screws. I had only a 1/2 and that did not work. Back to the neighbor's for their 7/16 wrench and that made all the difference. Okay wall attachment is mounted to the stud. Now it was time to hang the TV onto the wall attachment. I like to do things myself but I really should have asked for another set of hands. This is where I broke my sweat. I had to lift my TV a bit higher than y head to center it on the wall mount on these two metal prongs. I could not see what I was doing. I got it there but then realized that I needed these critical two smalls screws to do the final attachment of the TV to the wall mount. Those screws were on the floor and I could not reach them and my dogs do not know how to fetch. So be sure to have those screws ready to use. Once I had them I could do the final turns of the screws. Those two little screws are the key to having the TV attached to the mount. So look at the pictures on this posting, even the box has helpful images. Have the 5/32 drill bit and the 7/16 socket wrench. And a friend if you have to mount the TV up high As I had to use the widest spacers, my TV has a 5" profile from the wall. It still looks great and I am very happy with this mount. Everything seems very sturdy. I used a little twisty wire to attach the excess electric cord length to one of the holes in the extender

* the monitor can’t tilt vertically or move vertically. Mount it with care. If you need a solid monitor mount that needs to have the monitor move left and right to accommodate operations (showing people across the room) this is perfect. I fly flight sims so the flight monitor/control applications are on the monitor so I move it to the side so I can see the screen in the cockpit while flying on another monitor. But I swing it straighT because it’s my primary gaming monitor. Much better than an arm because it doesn’t adjust vertically. But take extra care to mount the monitor where you want it, because it doesn’t adjust vertically. It suits my needs 100%. The screen on the left swivels so I can monitor the flight.

I've used this mount a few times and it is great! All hardware is included and it is easy to install. Heave duty !

Super easy to assemble and sturdy. Love how it is full motion. All of the necessary screws and tv support are included. I mounted my 55” by myself and even hung on the mount to check sturdiness and it did not move. Also mounted a 43”

The package came with screws rusted

Queda perfecto para mi TV de 32” vesa 100x200 Se ve resistente de buena calidad. Trae todo lo necesario para instalar a excepción de esa herramienta de dados/matraca. Esa la compré aparte para apretar los tornillos que van en la pared.

Cuando llegó tuve mis dudas, pero es facil ensamblar, solo tienes que saber exactamente como colocarlo en la pared tomando en cuenta la dimensión del equipo a instalar, en verdad funciona bastante bien y los taquetes como las pijas son una mera chulada, por su grosor y firmeza, facil puede soportar una pantalla de unos 15 kilos, como máximo.

CASI PERFECTO, HABRÁ QUE CAMBIAR AR LA FORMA DE SUJETAR LA PANTALLA. TAL VEZ PONER EL CUADRO A LA PANTALLA Y SUJETAR A UNA PARTE DEL BRAZO PARA HACERLO MÁS PRÁCTICO; YO TARDE EN LOGRARLO