Paddling Pool Repair Kit Waterproof, Salt, Hot Water and UV Resistant Hot Tub Puncture Repair Kit, Inflatable Repair Kit Repairs a Variety of Inflatables (PVCJS)

The tube of adhesive comes with a plentiful supply of small flexible plastic sheets, which you can cut to size. The adhesive sticks well and after a couple of weeks of being immersed in water - I used it to cover a small hole in a pond liner - it's still firmly in place. One thing to note is that when you apply the adhesive the non-adhesive side curls outwards, so if you can it helps if you can apply pressure to the adhesive patch for a few hours, ie with a heavy weight (as per the instructions). I couldn't do this, the hole being on the side of my pond, but I held the patch in place for a few minutes by hand which did the trick and it stayed in place. It does stick pretty quickly but instructions suggest leaving it to set firmly for a couple of days. Easy to use and would recommend.

Had a small hole in my lay-z-spa lid. This repair kit appeared to be good value and straightforward to use. Clear instructions, plenty of glue and a good selection of clear repair patches. Instructions suggest you allow the repair to 'cure' for 48 hours, I played it safe and gave it 72. So far so good...the repair is holding well and the lid is still inflated. Very happy.

Used on 10ft pool for my dog.She loves to run and jump in, so her nails can catch on rim.So easy to use and does the job well.Only thing is that you can see where you have used it.But mine is for a dog pool and I don’t think she cares.

The glue and pads work ... however you need to have them completely flat and smoothed out to ensure it dries and fully seals. When you apply the pad to the glue, it tends to crumple up and shrivel. It did however repair the punctures. Just not very aesthetically pleasing.

Our inflatable hot tub sustained 3 small rips on the base when being moved. Air leaking substantially and I thought all was lost.This product is amazing, easy to use and has repaired all the rips (largest one approx. 1.5 cm tear) and is as good as new. Follow instructions, make sure area is cleaned thoroughly as well. I couldn’t weigh down the repair due to its location, just added glue to rip, glue on the patch, held in place until cured (15mins or so) then added a bead of glue around the edge of patch and allowed to cure for 48 hours before inflating. Would highly recommend this product!!

At first I struggled to get this to work but when I did it works perfectly. Our pool had multiple holes and this fixed it, very sticky, Great value

The media could not be loaded. What started out as a tiny leak has turned into a huge nightmare! I followed the instructions to the letter-5 times! I drained the tub, sanded the area, applied the patch, clamped and waited 48 hours for the glue to cure. Then pumped up and re-filled the tub, checked the leak for bubbles and when I didn't see any I thought it was fixed. All seemed sorted while the water was cold. As soon as the tub reached 39c the glue softens and the air works it's way out. So I would repeat the process, all the while the repair looks worse and worse, after 5 goes I have given up and ordered a new liner. May work perfectly on a cold pool but not a hot tub!

We had a hole in our Lazy spa Helsinki hot tub, by the seem.Had to glue the sewn back and then latch it up. The first glue from a well know brand didn’t work.Tried this one and the glue not only stick the seem back but the patches worked a treat on making it more secure.Still early days but so far would recommend for small hot tub leaks.