VEVOR Button Maker Machine, 75 mm (3 inch) Badge Punch Press Kit, Children DIY Gifts Pin Maker, Button Making Supplies with 100pcs Button Parts & Circle Cutter & Magic Book

Very sturdy and heavy duty button at a price point that should suit most casual users, but highly recommend enough quality for a serious button maker. Great value and comes with everything you need to make lots of buttons right out of the box. The set up instructions might be a little hard for some to follow, but they do offer links to videos and those were very succinct and helpful. Easier to understand when you watch it. I’m pretty serious about button making and use them as merch for my business. However, I would also recommend this as a craft set up for kids. It’s not much more money than a plastic button maker that will break and frustrate kids with poor results. Smaller buttons are easy to press. Larger buttons might require adult assistance. If your kids become disinterested and it’s collecting dust, you could resell it for a solid price to fund the next hobby. Those cheap plastic presses are all going to landfills. They break. They have no resale value. I have had a very small amount of failed buttons with the press, and all of the failures were my fault. A very reliable machine as long as you set up all the button components properly. Take a second to inspect each button after pressing. If something is wrong, you can figure out what you are doing wrong because it’s not the press. Great press!

This is an amazing button maker. After trying three other brand and had issues with them all. The Vevor button maker is easy and consistent. It made button making made simple. Well made and sturdy.

Works very well. I made at least a hundred buttons in the two days after receiving it. Feels sturdy, easy to change the button sizes. About 95% success rate on the buttons. Every once in a while they don't come out right but has gotten better as I used it more. Much better than the plastic button maker I used before.

I first need to state that this is a great button maker. It's well made, easy to use and very sturdy. I'm giving it a low rating for the reason that follows.... After a few days of testing and making several of the larger sized buttons, we switched over to the smaller size and discovered that the transparent protective films for the 25MM were missing from the box. The two options through Amazon were 1) return the whole item, or 2) contact the manufacturer. Since we already used quite a few of the supplies for the larger buttons, and it was only a small pouch of films that were missing, I decided to contacted Vevor. I worked with their customer service department via chat/email. They verified my order with Amazon and offered two options; 1) The would send the missing items from their supplier overseas with an estimated 2 - 3 weeks delivery time, or 2) Return the whole thing to Amazon. As I mentioned above, I did not think that a total refund/replacement was necessary since the missing items were so small, so confirmed that I would wait for the missing films. 3 weeks later, still no replacement, but I did get an auto-generated email from Vevor stating that since they never heard from me, they would assume that the issue has been resolved and would be closing the ticket in 24 hours. I contacted them immediately and re-explained the whole ordeal. They responded with "I'm sorry that we can't contact the technical staff to reissue the accessories for you, please contact Amazon as soon as possible to refund you." So, now I'm back to square 1. I still don't feel right about returning an item that 1) I like, and 2) I have already used so much of the supplies. But I also don't think it's right that they will not work with me to find a solution. I've found that if I were to purchase the missing items, through amazon, it would run me $25+, so it looks like I have no choice but to send the whole thing back. WHAT A PAIN! And a total waste of resources.

I purchased the 3" machine after purchasing another in 2.25" machine from another well-reputed company that was way more expensive than this machine. That machine is on a 6 week backorder and while I am waiting I thought I would give this a go. I ordered that because of the reputation and community pressure of feeling like purchasing any other brand would be a very bad idea. Now, I think many brands on Amazon ARE cheap junk and I can't speak for the smaller size machines Vevor (they look to be made of different material) but this 3" machine is phenomenal. Very well constructed, heavy metal. There are a couple of plastic pieces...we will see how they hold up. Their instruction book did seem to be backwards from what you are actually supposed to do as far as labeled parts, so I did mess up several buttons at the get go, but I figured it out. Seems very solid and I am very happy with the money spent. I also decided to upgrade my paper punch after doing a few with the provided cutter. It is fine for a few but if you are doing many buttons, it will be frustrating.

Really nice for the price! It's very easy to get started, and making buttons with the machine is very addicting haha. I've been having a lot of fun trying different papers and printing out designs. I also really appreciate the extra panda designs it came with-they're super cute and great to practice with. The first few you make aren't going to be perfect, but after some time it becomes a lot easier (make sure you line the designs and backings up with the arrows; I totally missed this and didn't understand why everything was misaligned at first). It's a little tricky to find the right amount of force to push down with. Too much seems to make the paper crease at the edges, and too little makes the clear film bubble up. I did eventually manage to get the hang of it though and now it's fairly easy to make a bunch of smooth buttons without issue. Overall it's a great machine at a much lower price than other brands. Thank you!

Zunächst ein kurzer Einblick. Demnächst folgt noch ein Erklärvideo zur Handhabung. Die Ausführung ist schwer. Es gibt kaum Plastik an der Presse. Lediglich die Verkleidung weißt auf geringe Anzeichen hin. Die gesamte Mechanik hingegen ist solides Metall. Die Anleitung ist durchgängig in Englisch gehalten (dafür ja auch das o.g. Video ☺️😉). Dem Lieferumfang sind zwei Sechskantschlüssel beigelegt, von welchem man den kleineren benötigt, um den sehr schweren Standfuß zu befestigen. Wozu der zweite ist, entzieht sich meiner Kenntnis 🙍🏻. Die Schrauben zur Arretierung des Schiebeschlitten sind einfache Sechskantschrauben (wofür es keinen Schlüssel gibt 🫣). Diese muss man aber hin und wieder lösen, um den anderen Stempel einzusetzen. Hierzu im kommenden Video eine Lösung 😉). Im Preis beinhaltet sind hier auch noch je 100 Buttons in 25mm und 58mm in Metall. Und diese beiden Varianten dann noch einmal in Kunststoff und ebenfalls je 100 Stück. Man kann also gleich loslegen und insgesamt 400 Buttons herstellen. Denn ein Buch mit Motiven liegt im Karton ebenfalls bereit. Sowie zwei Kreisschneider, die man in unterschiedlichen Größen einstellen kann. Gesamturteil: Für den Preis eine stabile und robuste Ausführung und Qualität. Würde ich wieder kaufen, wenn die Produktion steigen soll.

Many of the reviews suggested these button makers don't work properly for one reason or another but I decided to take a chance. It is a present for my daughter to make buttons for the netball team she coaches so I thought I should test it before I pass it on. I had a quick read of the instructions. Reading instructions first is new to me! It looked solid and well made but when I came to assemble it, the machine didn't sit flat on the base. I placed it on some course sandpaper and it didn't take long to overcome that. The holes in the base of the unit didn't quite line up with those in the plate but a slight adjustment fixed that too. I could have succeeded without the adjustments but was happier knowing it was a solid mounting. From what I had read about others, I was expecting to have to make several to get one good one so I just put the parts in the machine, pulled down the handle for the first step, then the second and I had a completed badge that looked quite professional. Maybe that is the only one that will work but I assume that success will continue. I'm very happy with the purchase.

La amé, al principio no supe como colocar cada cosita pero es super intuitiva y al final lo logré ( '-｀) Vienen laminitas de papel para prueba y el librito pero como sentía que era un desperdicio (para mí) mejor usé fotos de mi gatito y quedaron de maravilla! Consejo: para los pines de metal utilicen los dos aros negros para mejor presion, así el pin no se separa!!

Robusta e funzionale, con gli ingranaggi e gli stampi in metallo pieno e la struttura in plastica dura. L’assemblaggio di una spilla è rapido una volta capito come funziona (due o tre tentativi a vuoto al massimo). È fornita con una enorme quantità di materiale consumabile, e altro se ne può comprare facilmente dallo stesso produttore. Adatta a produzioni di un certo volume, meno (ma solo per via del costo) per fare solo alcuni pezzi per gioco

En bra stark stansmaskin. Enkel att använda