DisplayPort to USB C Cable 6.6ft 4K@60Hz With USB Cable Adapter,DP Male to Type-C Male Converter Support Touch with Nreal Air, MacBook Pro/Air 2020/2018, iPad Pro/Air, XPS

I wanted to connect my desktop PC to my monitor, which has USB-C inputs that act like a dock (receiving Displayport & USB signals over USB-C to connect the display & USB devices attached to it). It's exceedingly rare to come across desktop PC components with the DP over USB-C required to do this (RIP Virtualink). This cable worked perfectly to deliver DP (from the GPU) & USB (from the motherboard) signals over USB-C to the monitor! I no longer have to worry about finding motherboards with Thunderbolt ports to do this.

Tested works with 9070XT via Display Port on a system running Bazzite connected to a Studio Display XDR. 5k 60hz / 4k 120hz with HDR enabled. Built in Stereo + Webcam is supported as well with brightness / volume control with no additional software required. To get 5k 120hz you'll need a different cable but right now there aren't many that will also support the built in webcam and stereo.

I have been searching and trying many cables to connect my virture luma pro glass to my desktop PC that do not have thunderbold or displayport over usbc. This cable works. The USB-A cable that provide power also allow data to pass thru. Which allow the immerse3d and spacewalk app on my desktop pc running windows11 able to detect and communicate the Virture Luma Pro spectacle. You however need thunderbold USBC female to USBC female to join the USBC of this cable to the Virture Luma Glass.

Why I bought this: I have 3 computers all hooked to 4 monitors. 2 of them use my 4K TV/monitor with HDMI 2.1 for 4K 120Hz. However, my main monitor for my work PC is my 3440x1440 ultrawide. I do not care about the resolution, but the extra real estate so it displaying in 2560x 1080p with a cheap HDMI isn’t a problem. However, as the second monitor or when ultrawide is beneficial in games with my other PC’s, that monitor I want the highest resolution and frame per second I can get. My ultrawide monitor also has a KVM feature The problem: my main gaming computer is the more powerful and as such, utilizes the ultrawide’s only DP port for 3440x1440 144Hz gaming. The HDMI ports only offer 100hz at that resolution but because the HDMI ports on both gaming computers are utilized by the 4K monitor, I tried going DP to HDMI from my backup/second PC but anything that said 2K at 120 or 144Hz would only display the picture in 2560x1080p at those refresh rates. If I change led it to my monitors true resolution, my max refresh rate was 60Hz Why this was the solution: my ultrawide supports USB-C A/V input. Remember I mentioned my monitor also has a KVM switch? That feature that combined with my physical KVM switch I already had, allows me to utilize the same mouse and keyboard with all three computers without adding more wires on my desk from a second manual switch. So, this cable allowed me to utilize my monitors built in KVM function, being able to plug the USB-A into my second computers motherboard to send mouse and keyboard commands and the DP on the video card the other way through the single USB-C into the monitor. I got the resolution (3440x1440p) I wanted as well as the KVM feature. There was a slight performance cost however. This solved my issue of running two cables to have the KVM and A/V, as well as reduced resolution (2560x1080p) when using a 144Hz rated 2K (2560x1440p) cable. In case you don’t know, the extra width of the monitor adds to the pixel count, which increases data for each frame, which lowers the rate at which the cable can transfer more data. To keep the same higher rate, it lowers the pixel count. This cable allowed my to send 3440x1440 A/V through USB-C to my monitor at 95Hz. Its not the full 144Hz my monitor is capable of but it didn’t limit me to 60Hz like DP to HDMI did. So for me, while I will still look for a cable that will meet the KVM and DP to USB-C functionality but support full resolution at the full refresh rate, I will happily use this until I find what I’m looking for or maybe, just maybe the manufacturer will see this and will create or suggest if already available a similar cable with a higher data transfer rate.

Für alle, die wie ich lange gesucht haben: Dieser Adapter ist perfekt, um einen ASUS MB169 Mobilen Monitor (oder andere Geräte mit USB-C Display Port ALT Mode) an einen HDMI-Anschluss zu verbinden. Nach vielen Tests ist dies meine bewährte und zuverlässige Lösung, die ich seit über einem Jahr täglich genutzt habe, bis ich den Monitor getauscht habe. Eine klare Empfehlung für jeden mit diesen Anforderungen!