Gyokucho 770-3500 Razor Dozuki Saw with Blade

Impressive saw for joinery. The blade is very thin, so you wind up with a really smooth finish, if you take your time. As with most Japanese style saws, it’s best to allow the saw teeth to do the work by using as little pressure as possible Very affordable price for a saw of this quality

It's important to note for those who don't already know; Japanese saws and planes work on the pull, not the push unlike with western designs. The Gyokucho brand Razor Dozuki is an excellent saw. It cuts quite fast and makes dovetail cuts nicely. The rounded tip with teeth works well to start cuts in tight strokes, and if you need to cut a hole in the middle of the material. The "set" (which is the degree to which the teeth are spread apart to either side) works well to move waste material out of the cut but is thin enough that it doesn't adversely affect the "kerf" (the width of cut). One of the greatest feature is that the blade can be easily changed out for another blade designed to mount this brand's handle. The backbone of the blade works well to stiffen the blade to prevent wobble and wandering cuts, and it is removable so it can be used on other blades as well. The blades lock into the handle very securely and stable.

Purchased for cutting dovetails, fingers joints and any other joints that I may be making. The main thing I love about these saws is their sharpness. Have two for flush cuts, two more for cross cuts and rip cuts. And I really hate to say this, my father and his two brothers, one who was a union master carpenter license holder, and the other a mechanic, would probably wonder how they did as much wood work, cabinetry ect in houses with US made saws that would look dull after sharpening compared to these saws. I may never pick up my collection of US saws again. Pulling is so much easier. Maybe I will reverse the teeth on my 20 or so US saws. LOL

I was new to backsaws when I first purchased this dōzuki and I've since learned a great deal about them, including what I did wrong when, after months of happy use, I damaged this one. First off, this is a decent dōzuki for the money. Top-end dōzukis can cost hundreds, and for good reason — because, unlike other backsaws, dōzukis feature very sharp, thin blades that enable surgically precise cuts in soft and hard wood. However, and here's where I screwed up, it's important to understand that not all backsaws cut both ways, meaning on the push stroke and on the pull stroke. Due to the thinness of the dōzuki blade, and the unreinforced curved tip, it is only intended to cut on the pull stroke. If you attempt to cut on the push stroke, you can bend and crease (i.e., ruin) it quite easily, especially if the unreinforced curved portion of the blade's tip is engaged with the wood when you apply forward pressure. If you've ever heard a saw blade sing, you'll recognize this particular song as a dirge because, once this blade gets bent, it will never ever be the same. So, lesson learned on my part to never assume I understand a tool, no matter how straight forward it might appear. Fortunately, as I said up top, this is an affordable saw, so the loss wasn't too great. Still, had I used it properly (to cut on the pull stroke) I wouldn't have had to replace this one. It's a very effective cutting tool for anyone's saw box. But be careful to keep the include blade cover in place when not using it, not just to protect the tool, but to protect anyone who comes in contact with it. This is one very sharp saw blade.

the handle is too long to fit in tight spaces but the blade and back bone come out of it with one screw. If you remove the blade from the backbone the blade is very flexible. This is truly razor thin and I'm not talking a thick utility razor I'm talking an ultra thin precision shaving razor. The saw teeth are not just ground into the blade they are true saw teeth with proper spacing and offsets to function as a saw should cutting away material and sweeping it out of the joint. This is the real deal even if the handle looks a little gimmicky.

If you grew up in the "West" you are probably used to hand saws that cut on the push stroke. This saw cuts on the pull stroke and between its minimal kerf, excellent sharpness, and accuracy, I am more than happy with this saw, I'm only sorry I never bought one decades ago... Having said that, the fact that it can do plunge cuts in hardwood and has a replaceable blade is fantastic! It's not for cutting 2x4s but used properly, it's a superb tool, and it's made in Japan, not China!

The saw slipped out of the curf and i was going to hard and jammed the tip of the blade, bending it. I tried to reset it but its not perfect. I could get a replacement blade. Just be careful because they bend pretty easily, which is not surprising because this is a sensitive, precise tool. Incredibly useful and well made, but just giving you this warning so you don't make the same mistake.

Just came around to ordering a new Razorsaw for my wood working projects and looked up my history to see that it has been nearly 10 years and I still use this saw. It works great on all my wood projects and cutting into boards on the fly. Really easy cuts and clean if you know how to properly use this type of back saw. It is def a great tool to have on the bench abs well worth the cost.

切れ味が良いそうです！ HC（コーナ●プロ）でも売っていて 2178円（税込）でしたので、お得感あります♪ ただ刃の背？のところに補強の鉄部がついていてそこがひっかかると言ってました。。 細いものを切るのに適していて厚みがあるものには向かないんですね？

Muy buen artículo, hoja muy delgada pero con el refuerzo superior le da mucha rigidez y funcionalidad como un serrucho de costilla. Excelente filo. Cortes muy delgados y precisos. Corta sin esfuerzo

Maneggevole e preciso . Acquisto straordinario per le mie necessita hobbistiche.

Japanese saws cut on the pull end so it offers more control and less strain on the arm.This Dozuki saw cuts clean with out chipping and very accurate.The handle is very comfortable and grippy.To change blades all you have to do is turn the wheel and the blades slides out.Quick and simple.Haven't use it long enough to judge how durable it is but from first impressions its a well made saw.I used to cut maple which itself is not a hardwood but experimented on some red oak and did cut well also.Either way for the price it's a very good saw.

Scie parfaite si besoin de faire des coupes d'assemblage ou la précision et la finesse de coupe sont importantes .seul bémol la scie est tellement fine qu'au moindre bloquage la lame se tordera et prendra un plis .possible d'y remédier avec un peu de force mais c'est un scie a laquelle il faut prendre soin. Outil de précision pas pour du debisde grosse section.a bon entendeur