Permatex 09103 Windshield Repair Kit, Professional Quality repairs, No mixing required,Resin Cures by natural sunlight, Easy to follow Instructions 1 x 0.75ml

Easy to use, works well

For some reason the Rain-X kit has a lower rating than this one, but there are a number videos on YouTube that suggest it's the better choice. This one works, it's fiddly and is easy to use too much resin with the tunnel, leading to some mess when you take it off. I dropped the resin in as opposed to inserting the resin tube, and had to use a piece of wire to break the air bubbles and make it fall in. There are instructions from Permatex on YouTube - be sure to watch them a number of times. It seems to be relevant to an older version of the kit, though. The instructions say to cut off a couple of mm from the resin tube, but it seems that the new tube design with the twist-off end stop (not a cap) opens a small hole anyway. There's also a video from "Ry the car guy" who presents a better instruction ("How to Fix Windshield Chips at Home using the 3 Highest Rated Kits on Amazon"). Also take a look at "Do Windshield Repair Kits Really Work?" from TylerTube.

I've just completed the process on my 2 series BMW screen (not yet 1yr old) in less than ideal conditions. A month ago we had two on our Audi screen done professionally -not Permatex, for £40 and were disappointed that the damage was still very visible. Results with the Permatex are EXCELLENT and the damage is now invisible except for a tiny mark about pin head size where the stone hit the screen. Tips- Do read right through the instructions before starting because the temperature range is important, it was just 10C when I did mine, and also getting direct sunlight on the screen to cure the resin when it's been injected is necessary, cloud only for me so it took a few hours but still cured. Don't worry about cleaning excess resin off your screen afterwards because the razor blade and some glass cleaner will do that. Do follow the advice to put a cloth or paper towel below the damage on the screen to prevent excess resin running down, perhaps on to the screen edge or body work. Just ordered another in case I need it! I needed it and for a larger 'bulls eye' than before. Again, the result was excellent and except for a small section of crack a couple of millimetres long it removed all traces of the damage except a tiny chip mark. Far superior than the 'professional. repair at £40 a go.

It is west of money. It didn’t do anything on windscreen. I will not recommend this item.

I used this kit for a 50mm crack on my car windscreen, the tube of glass resin is very tiny and i should think is for one use only - especially if you use the large syringe that comes with the kit - sadly although it cured nicely in the sun, the crack is still very visible on my windscreen all i can hope is that it has sealed the crack and it won't run any bigger - The kit you get is not good value for money at all - there are cheaper and better equipped repair kits on amazon.

A brilliant product. I don’t always write reviews however this is worth my time. My car had a chip about 1mm deepest and 5mm in diameter on the windscreen. I simply followed the instructions and an hour and a half later it had all but disappeared. Simply brilliant.

Fantastic. Not too difficult to use. It has repaired the chip on my windscreen perfectly. Delighted. I think good value for money.

Good product with instructions.

高速走行時に飛び石でフロントガラス中央に小傷ができました。近所にリペアショップが見当たらなかったのと、小さめの傷だったのでDIY製品で対処しようと思いました。 同じような商品がいくつか用意されていたので非常に迷いましたが、最終的にレビューを参考に購入を決めました。 日本語の説明書がないことはわかっていましたが、「傷を密閉して減圧し、樹脂を傷の奥まで浸透させる→樹脂を日光にあてて硬化させる→余分な樹脂を付属のカミソリで整えて完成」という流れが写真とともになんとなくわかります。 あとは、減圧し続ける時間や、硬化させる時間をきちんと守ればたいてい成功するのではないかと思います。 付属している注射器や、ガラスに貼り付ける器具や両面テープ、UV硬化樹脂、カミソリといった同梱品がどれも高品質で、つくりがしっかりしているところに関心しました。 気温は10度程度で真冬の日差しでしたが、樹脂はしっかり硬化し、傷もほぼわからなくなりました。 目的が達成できて非常に満足しています。作業時間は、減圧、硬化の待ち時間をすべて入れて５０分くらいでした。 樹脂の耐久性については分かりませんので、その後の様子については何か変化があればレビューしたいと思います。

This is easy to use. Repair was simple following the instructions and where the pit was is now almost invisible from the outside and completely invisible from the inside.

Worked great, firstly it's ment to be done under cover till it needs to be cured. I waited a bit longer during the sucking out air stage because I could see bubbles still from the inside. Then when I had to push the syringe plunger down to 2nd notch I waited longer there to, bobbing my head up and down in all different angles, till I practically couldn't see any light glinting in the tiny cracks. I used a UV light to cure as it was an overcast day and did 2 sets with the setting sheet. You can only just see some of the chip in the 2nd pic as I forced my camera to focus on it which was difficult.

Soldi buttati non serve a niente

انصح به