• Concentrate.
• -containing.
• Fast-acting.
• Hardly any odour.
• ›See more product details.

A special product from the LITHOFIN-Range for ceramics, quarry tiles and porcelain (KF). Lithofin KF Cement Residue Remover is a highly active cleaning concentrate based on a special composition of s and supporting agents. The product is nearly odourless and does not develop any vapours.Properties:Lithofin KF Cement Residue Remover dissolves an deposits such as cement and mortar residues, efflorescence, rust and calcium deposits. The dirt can then be completely removed from the surface.Technical Data:Density: 1,09 g/cm³pH-Value: Appearance: clear, orangeOdour: pleasantSolubility in Water: very goodField of Use:Due to its mild odour, Lithofin KF Cement Residue Remover is particularly suitable for indoor use. For cleaning all ceramic surfaces, which need to be cleaned after laying and grouting. The original appearance of the surface is restored. Removing even hardly visible residues is a prerequisite for unproblematic maintenance.Directions for Use:Dilute Lithofin KF Cement Residue Remover approx. 1:5 to 1:15 with water depending on the stubbornness of the deposits. Apply the solution to the wet surface and spread with a brush or scrubber. After several minutes, remove the solution from the surface with a wiping cloth or a wet and dry vac. Rinse well with clear water. In case of stubborn deposits, repeat this procedure with a lower degree of dilution or undiluted.Please Note: always test the product in an inconspicuous area prior to use. sensitive surface such as enamel, zinc, marble, limestone, certain decorative tiles, wood, etc. must be protected against splashes.Suitable for all resistant ceramic wall and floor tiles, quarry tiles, porcelain, clay and brick as well as terracotta surfaces.Coverage:Approx. 12 to 30m² per litre depending on the typ