---
product_id: 48150781
title: "35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor"
brand: "ridgid"
price: "58681 kr"
currency: ISK
in_stock: true
reviews_count: 6
category: "Ridgid"
url: https://www.desertcart.is/products/48150781-35585-10-screw-extractor-set-1-4-inch-to-1
store_origin: IS
region: Iceland
---

# tough steel durability 20 precision tools 1/4" to 1/2" capacity 35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor

**Brand:** ridgid
**Price:** 58681 kr
**Availability:** ✅ In Stock

## Summary

> 🔧 Break free from broken screws—extract like a pro!

## Quick Answers

- **What is this?** 35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor by ridgid
- **How much does it cost?** 58681 kr with free shipping
- **Is it available?** Yes, in stock and ready to ship
- **Where can I buy it?** [www.desertcart.is](https://www.desertcart.is/products/48150781-35585-10-screw-extractor-set-1-4-inch-to-1)

## Best For

- ridgid enthusiasts

## Why This Product

- Trusted ridgid brand quality
- Free international shipping included
- Worldwide delivery with tracking
- 15-day hassle-free returns

## Key Features

- • **Built to Last:** Tough steel construction ensures durability for repeated heavy-duty use
- • **Organized & Ready:** Durable pre-formed plastic case keeps your tools neatly stored and accessible
- • **Versatile Size Range:** Handles broken screws from 1/4-inch to 1/2-inch (6mm to 13mm) with ease
- • **Master the Extraction:** Designed for professionals who combine the right method with the right tool for flawless results
- • **Precision in Every Piece:** 20 clearly marked extractor, drill, and guide tools for exact screw removal

## Overview

The RIDGID 35585 Screw Extractor Set features 20 precision tools crafted from tough steel, designed to remove stripped or broken screws ranging from 1/4-inch to 1/2-inch. Housed in a durable plastic case, this set offers organized, reliable performance for professionals who know that the right tool combined with the right technique is key to success.

## Description

RIDGID 35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor : desertcart.co.uk: DIY & Tools

Review: Not strong enough - The M8 sized remover was not strong enough even for a shallow screw. It snapped off on one side with just hand pressure. I then tried the other side of the spline and then it shattered. The drill bits supplied are also not the best quality for the price. The bolts also seemed like they had been used previously and one was covered in dirt/soot. The plastic box was chipped at the front. In the end I used my own high quality drill bits to drill through the screw and re thread the hole.
Review: These extractors are fairly strong . No extractor can withstand abuse or improper use but these are well made . If used properly , these do work . I misused the smallest size and broke it necessitating replacement , but it took quite a bit of force to break it . That is testament to the quality and strength of rigid tools . If you’re having trouble extracting a fastener , it’s likely another method needs to be used , such as heat . If I had used heat , I would have had a successful extraction the first time and most likely not broken the extractor . This is a well made and well thought out extractor system . It up to us to have a well made plan before breaking our tools . I do believe that this set is the right tool for the right execution if you’ve got the right plan . This is the kind of extractor that is needed to work a bolt or stud loose . This set is designed to move in and out , back and forth to get the threads moving. It’s up to us to apply heat and penetrating oil properly or at least choose the right method for success . No tool is a miracle , it’s the method employed . This tool set is a better tool to apply , accompanied by a better method .

## Features

- Effectively removes stripped or broken screws
- Set includes 20 precision tools; extractor models 1 to 5 inclusive with turnuts, drill models 1 to 5 inclusive, and drill guides models 921 to 1821 inclusive; each precision tool is clearly marked
- Tough steel construction improves the pipe extractors' durability for extended use
- Durable, pre-formed plastic box keeps tools organized and offers convenient storage
- Set has a 1/4-inch to 1/2-inch (6 mm to 13 mm) capacity

## Technical Specifications

| Specification | Value |
|---------------|-------|
| ASIN | B000WQYJIG |
| Batteries Required? | No |
| Batteries included? | No |
| Best Sellers Rank | 570,297 in DIY & Tools ( See Top 100 in DIY & Tools ) 106 in One Way Drive Sockets 226 in Nail Pullers 4,949 in Drill Bit Sets |
| Colour | Rot |
| Compatible fastener range | Designed for use with various screw types and sizes, including those that may need extraction or drilling. |
| Customer Reviews | 4.5 4.5 out of 5 stars (135) |
| Date First Available | 17 April 2012 |
| Finish | Polished |
| Item Package Quantity | 1 |
| Item Weight | 560 g |
| Item model number | 35585 |
| Manufacturer | StandardPlumbing: Kohler |
| Material | Plastic Alloy Steel |
| Number of Pieces | 20 |
| Part number | 35585 |
| Product Dimensions | 16.76 x 13.72 x 2.79 cm; 560 g |
| Size | Variety Pack |

## Product Details

- **Brand:** RIDGID
- **Finish type:** Polished
- **Item length:** 0.15 Metres
- **Material:** Plastic Alloy Steel
- **Number of pieces:** 20

## Images

![35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor - Image 1](https://m.media-amazon.com/images/I/61h+sHk0SoL.jpg)

## Questions & Answers

**Q: Are the drill bits cobalt, and how well do they hold up**
A: Can't say for sure, based on their appearance.   I looked up the Blue Point (Snap-on) equivalent set, which indicates high speed steel (HSS) drill bits are included with it.   Snap-on's set runs (currently) at $128.00, so this is a good deal.   All the other truck dealers (MAC, Matco and Cornwell) sell the same set, too.

**Q: Where can i get a replacement no. 1 and no. 2 extractor?   rigid does not offer replacements in their catalog.**
A: Victor--That set must be a few years old!  As you know, the storage cases (for all kinds of tools) seem to be molded plastic these days.  As an aside, I received a replacement turnut (#1) because the one in my set was defective.   Ridgid sent me a turnut plus a LongGrip; apparently, they are replaced as a unit.   The #1 and #2 LongGrips are small diameter and were prone to breakage, which is probably why they were missing. When using them, the extractor diameter should be at least one-half (1/2) the diameter of the fastener you're trying to remove.  If you use a too-small diameter extractor, the force exerted can be enough to snap it.  I've thought the LongGrips are too long for many uses, and suspect they would be more effective if they were shorter (and thereby less likely to break).   You can use a closed-end wrench (such as a combination wrench) on them, but if the splined extractor was shorter, you could employ a deep-well socket, an extension and a ratchet in a confined space.  Another possibility would be a crowfoot or flare nut wrenchhead in tight areas.

**Q: Where are these manufactured?**
A: u.s.a. on the box

**Q: Are these a set of left-hand threads? Im looking for something like a tap and die for a stripped allen head but with reverse threading.**
A: No, the drill bits are right-hand twist (i.e., "standard"), and the splined extractors are universal (they work effectively on both right- and left-handed thread fasteners).   For U.S. fasteners, the set would be more effective if the drill bits were left-hand twist; by running a power drill in reverse, those bits tend to loosen up right-hand threaded fasteners, which makes them easy to remove.  Right-hand twist bits tend to drive the fastener in a little deeper rather than loosen them.  Regardless, though, the splined extractor is then inserted into the drilled hole.   As the extractors are relatively long, you will need to drill the hole fairly deep into the fastener; a few taps with a ball peen hammer should be enough to set it.   You then turn it counter-clockwise with the matching turn-nut, using a combination wrench or a deep socket and a ratchet; you could also use an adjustable wrench.

## Customer Reviews

### ⭐ Not strong enough
*by D***P on 30 May 2023*

The M8 sized remover was not strong enough even for a shallow screw. It snapped off on one side with just hand pressure. I then tried the other side of the spline and then it shattered. The drill bits supplied are also not the best quality for the price. The bolts also seemed like they had been used previously and one was covered in dirt/soot. The plastic box was chipped at the front. In the end I used my own high quality drill bits to drill through the screw and re thread the hole.

### ⭐⭐⭐⭐⭐ Review
*by G***M on 8 December 2024*

These extractors are fairly strong . No extractor can withstand abuse or improper use but these are well made . If used properly , these do work . I misused the smallest size and broke it necessitating replacement , but it took quite a bit of force to break it . That is testament to the quality and strength of rigid tools . If you’re having trouble extracting a fastener , it’s likely another method needs to be used , such as heat . If I had used heat , I would have had a successful extraction the first time and most likely not broken the extractor . This is a well made and well thought out extractor system . It up to us to have a well made plan before breaking our tools . I do believe that this set is the right tool for the right execution if you’ve got the right plan . This is the kind of extractor that is needed to work a bolt or stud loose . This set is designed to move in and out , back and forth to get the threads moving. It’s up to us to apply heat and penetrating oil properly or at least choose the right method for success . No tool is a miracle , it’s the method employed . This tool set is a better tool to apply , accompanied by a better method .

### ⭐⭐⭐⭐⭐ Review
*by P***K on 2 September 2023*

Ridgid is good stuff in my workshop.

## Frequently Bought Together

- RIDGID 35585 10 Screw Extractor Set, 1/4-inch to 1/2-inch Broken Screw Extractor
- RIDGID 29983 Model 223S Stainless Steel Pipe Reamer, 1/4-inch to 1-1/4-inch Inner/Outer Reamer, Copper
- RIDGID 30088 Model RC-2375 Ratchet Action Plastic Pipe and Tubing Cutter, 1/8-inch to 2-3/8-inch Pipe Cutter, Chrome

---

## Why Shop on Desertcart?

- 🛒 **Trusted by 1.3+ Million Shoppers** — Serving international shoppers since 2016
- 🌍 **Shop Globally** — Access 737+ million products across 21 categories
- 💰 **No Hidden Fees** — All customs, duties, and taxes included in the price
- 🔄 **15-Day Free Returns** — Hassle-free returns (30 days for PRO members)
- 🔒 **Secure Payments** — Trusted payment options with buyer protection
- ⭐ **TrustPilot Rated 4.5/5** — Based on 8,000+ happy customer reviews

**Shop now:** [https://www.desertcart.is/products/48150781-35585-10-screw-extractor-set-1-4-inch-to-1](https://www.desertcart.is/products/48150781-35585-10-screw-extractor-set-1-4-inch-to-1)

---

*Product available on Desertcart Iceland*
*Store origin: IS*
*Last updated: 2026-02-14*