STANLEY MAXTSEEL Multi-Angle Vice, 1-83-069

This vise is very nice for the price, it's very smell but very sturdy with a solid design. First glance: I noticed the ball joint, threaded rod, and guide pins were quite dry with a very light machine oil applied so I disassembled the unit degreased it then liberally coated the metal on metal contact points, the ball joint, the threaded rods, and the guide pins with moly grease: 1. Unscrewing the threaded rod all the way releases the front jaw half. 2. Using a size 2 slotted screwdriver you can gently pry the circlip from the threaded rod shaft which releases the threaded rod from the jaw assembly. 3. Unscrewing the smaller spring/washer retained bolt and the two larger phillips screws frees the ball joint clamp assembly. There is no bushing or bearing to take the load of the guide pins so i filled the jaw half cavities with moly grease and after assembling the unit i wiped off all the excess that built up and degreased the jaw halfs so now the unit is built more accordingly to last a lot longer. I'm looking into designing some bushings and guide pin bearings to print with my 3d printer to see if i can make the jaws stay aligned and not wobble. Overall its a great vise and i've needed a vise for decades but dont have a proper solid table that would be suited for bolting a big solid vise, this is a hobby vise that is mobile and is perfect for my airsoft gunsmithing. 5/5 would recommend to anyone, I'd also suggest mirroring my actions to degrease clean and grease the unit with a proper grease designed for metal on metal contact that will reduce wear ultimately prolonging the longevity of the vice, I know it's only £22 but a bit of rust or uneven wear or galling would ruin things quickly.

Versatile Grip: A Review of the STANLEY MAXSTEEL Multi Angle Vice 🔧💪 As a DIY enthusiast and craftsperson, having a reliable, versatile vice is essential for my workspace. When I came across the STANLEY MAXSTEEL Multi Angle Vice, I was immediately intrigued by its claims of 360-degree rotation and locking capabilities. After putting this vice through its paces, I'm ready to share my thoughts. Positives: • The durable, corrosion-resistant cast-iron construction of this vice instills confidence, knowing it can handle a wide range of clamping and holding tasks without fear of damage or wear. 💪 • The patented ball joint design allows for full 360-degree rotation and locking at any angle, making it incredibly versatile and adaptable to my specific needs. This is a game-changer for access and positioning. 🔄 • Many customers, including myself, have praised the compact and lightweight nature of the vice, making it easy to transport and store without sacrificing strength or stability. 🏠 Potential Drawbacks: • While the removable rubber jaw pads protect delicate surfaces, a few users have reported that they can occasionally slip or become dislodged during use. Proper maintenance and care are important. 🧠 • The bright yellow and black color scheme, while visually appealing, may not suit everyone's workshop aesthetic preferences. 🎨 As a customer who has been using the STANLEY MAXSTEEL Multi Angle Vice, I can say that it's a fantastic tool for a wide range of projects. The 360-degree rotation and locking mechanism make it incredibly versatile, allowing me to position the vice exactly where I need it for maximum accessibility and convenience. The cast-iron construction is impressively durable, and the compact size makes it easy to store and transport. While I've occasionally had to readjust the rubber jaw pads, the overall quality and performance of this vice have been excellent. I highly recommend it to anyone in need of a reliable, flexible clamping solution for their workshop or craft space. Overall, the STANLEY MAXSTEEL Multi Angle Vice has proven to be an invaluable addition to my workspace. The impressive range of motion, durable construction, and compact design make it a versatile tool that can handle a wide variety of clamping and holding tasks with ease. 🌟 While the occasional minor issue with the jaw pads is worth noting, the vice's overall performance and capabilities firmly cement it as a top-notch choice for DIY enthusiasts and craftspeople alike.

I bought this as I was after a vice but wasnt sure about a permanently fixed one, and was halfway decided between a woodworking vice or a metalworking one. Then I saw this for £20. I took a chance, aware that it had limitations and it is being sold as a Hobby Vice. First, the negatives. The jaws are ever so slightly out of line with each other (see pictures). The locking bars are very small, making it awkward to tighten it to your bench or table (but there is a workaround...) The jaws open and the screw thread has a very slight deformity, meaning as you spin the bar with one finger the pressure needed changes, making my finger slip off... That said, I decided to keep it. Why...? The positives. It held a 2"x4" with no wobble at all while I cut it with my jigsaw. (You can see from the pictures that it wasn't evenly balanced either!) It can go in pretty much any direction you want, and can be set firmly (workaround coming up) It is solid and holds firm, and is Not a toy! It looks good in bright yellow. You can mount it all over the place to suit what you are doing. If you bear in mind it is a small device, then it is highly capable. For the money it is a bargain, as sending it back would not replace it with anything similar. Looking around you can find other items that do the same sort of thing, but they don't look as solid. The tension of the main ball joint can be set by two screws behind it, meaning you can adjust how easily it starts mo ing when you undo the tension bar... The Workaround. If you need to tighten the small bars beyond your finger strength, get a ring spanner on the end and use it for leverage. It works a treat. You just have to figure out which way to put it on, as it will only work in one direction. Bottom line; for the cost, it is a brilliant little vice with lots of strength and maneuverability

This vice is just excellent. But a bit of context first: I need a vice for modest woodworking jobs, scale modelling and the like, and so I purchased one of the other offerings here on Amazon. Specifically, the DAKFOOK 80mm Table Vice Clamp for £20.99. It seemed pretty good when it arrived, but I noticed soon that the lever that locks the vice to prevent it swiveling around would not lock tight, meaning that relatively little force would cause the unit to rotate around the desk-/bench-clamp. In addition, closing and opening the jaws started making a grinding sound, which came from the clip that keeps the one half of the jaws assembly where it should be. Duly, I decided to return it for a refund and started shopping for something else. I noticed however that a great many of the vices available from Amazon (at the low end of the price range, same as this vice) are obviously constructed using essentially the same castings. That is, there is probably some principal supplier for the companies that sell these vices, which manufactures the castings to which the vice companies apply paint etc. and do a little assembly. Clearly, there was no point in my purchasing one of the competitors to the DAKFOOK as I would be purchasing a replica essentially that would yield only the same or similar problems all over again. So I looked at the Stanley vice, bought it (for just one pound more than the DAFOOK) and I am now one very happy bunny. This is an excellent product - high quality castings, everything tightens and loosens as it should, things align as expected; a sound impression of professionalism - there are no apparent problems at all. In particular, I was concerned about the lockable ball-socket feature, but my fears went unrealized. That is very good indeed, giving an excellent range of movement (three degrees of freedom) and it locks rock steady. It seems unlikely that you would get away with trying seriously heavy-duty wood-/metal-working with this vice. After all, it clamps to your table/workbench rather than being screwed down (note: the bench clamp is very good, like everything else with this product), but it is not really intended for that. It suits someone with my lower-scale requirements down to a tee - I should have got one of these years ago. A final point: I read pretty much all the other reviews here for this product and I must say I had no issues with chipped paint and the like that those reviews mention. The paintwork on the item I received is just fine, so it seems fair to say that those items to which those other reviews refer were simply oddities that fell below the quality control threshold. This is an excellent, inexpensive product of very competent construction. Stuff the competition in this price bracket, get yourself one of these.

Fantastic vice and much more than I was expecting. It’s very Sturdy a good weight and very easy to fit and clamp to a multitude of surfaces and just as described in the advert. I use this vice most days for woodworking and metal work and as it has the ability to change angles it means that sanding and filing is far easier and much quicker.

Before I purchased this "Stanley Vice" I read all of the reviews both good and bad and eventually took the chance of which I'm pleased to say that I'm glad that I did. Some of the complaints regarding this vice were a little worrying to say the least i.e. Rust, Mis-aligned vice jaws, Damaged Paintwork, Weak & Flimsy etc etc but fortunately the Vice which I received was absolutely perfect and after giving it a full inspection looking for any of the above complaints, thankfully it didn't have any of the above-mentioned faults. 1. The main body/casting was perfect i.e. no marks or dents in the paintwork and very clean. 2. All of the Screwed Adjustment Rods had been oiled allowing for ease of use. 3. The Ball Joint had also been oiled and was so easy to manoeuvre into any position and it locks up solid allowing for no movement whatsoever. 4. When I screwed the vice clamps together, they were perfectly in line thus allowing for a perfect grip on any item being used. Also, the rubber Jaw clamps fitted nice and tight on to the jaws themselves but I suspect with use and constant removal they will eventually loosen up just like all vice clamps made in Copper or Brass etc. 5. I've got to say that this vice isn't for use in a machine/workshop environment where heavy materials will be used, it's mainly for DIY and anyone involved with Crafts/Modelmaking. 6. I use mine for all types of light work especially when using my Dremel for which it is perfect and have it clamped on to my Workmate in the Garage for most of the time and wouldn't like to be without it now. To sum up this "Stanley Vice Made in China" @ £21.00 It is extremely versatile and can be used for most small light craftwork or DIY work around the Home but also allows one to exert a lot of pressure when tightening the jaws and ball-joint to grip an item very tight and solid. Most people have come to expect a poor quality on items made in China but I can honestly say that this Vice which I received is the exception to the rule, and One can't be more fairer than that. Cons: - The tightening spindle for the Ball-Joint could do with being a tad longer so as to allow one to exert more pressure when tightening it up, but it's only a minor fault and doesn't cause a problem when using.

Very honestly, I cannot recommend this vice highly enough. It is relatively small, but has an awesome grip, and is very very versatile. Pros: + Very cheap + Small + Very sturdy + The multi-angle is much more useful that you'd think + If you need a simple stable one instead of a multi-angle, this rests nicely on it's side for a permanent small-ish vice with good grip + The jaws open quite a lot for it's size and you can fit an entire small pcb inside for soldering So and so: * It could have benefited from attached spirit levels to make sure it's level, but honestly I can't complain for the price. Negative: - The jaw pads are very sensitive to high temperatures - The only thing I can think of which isn't ideal, is that if you damage the jaw pads, it would be almost impossible to find replacements. Also, the replacements (if you are so lucky to find any) will probably cost about half the price of a new vice :( Do not let the negative dissuade you from buying this. Just be careful when using the jaw pads, or if what you're going to be holding will heat up, just remove the pads, do your job and replace them. If you damage them, buy some A70 black rubber and some tire glue and make new ones, as this is the cheapest and easiest method to replace them

The table vice is excellent for a variety of jobs. I was able to easily sharpen a shovel with it. It would do great for crafts, electronics, and any light to medium duty jobs. It’s well designed with lots of practical features. Easy to use, stable and compact. A note of warning - Mine did come with a few minor cosmetic marks. Cf. picture. It doesn’t affect the performance or the lifespan of the tool but then I’ll keeping it inside the house where it’s warm and dry. If I was to keep it in a shed I would get a replacement just in case. Still 10/10.

I have another portable table vice that I bought years ago, some no-brand low quality product which was OK but disappointed on a few things. I wanted something better and I'm very happy with this Stanley product. It exceeded my expectations. It holds work very firmly and is stable. It maintains tension in the ball joint when you loosen it so it doesn't flop about, which is a good touch. My only criticism is that the rubber guards on the mouth come off rather easily, and I expect they could get lost. But that's not a huge issue. I recommend this product.

Súper práctico y versátil, muy útil además de bonito.

Dobrze wykonane imadło, zapewniające stabilizację obrabianego przedmiotu. Wystarczająco szeroki rozstaw szczęk, super opcja pracy pod dowolnym kątem. No i ładne to jest. Da się przykrecić wszędzie. Polecam.

I am very impressed with the quality of this little vice. It clamps well. When ordering, I was worried about swivel clamping, I was expecting it to have some play, but it clamps well and doesn't move.

قوي المنتج