radiant NTL873WCC6 15 Amp Combination Adjustable LED Night Light and 3-Way Decorator Rocker Switch for Hallways or Kids Bedrooms, White (1 Count)

I installed this to replace a light switch and get a night light positioned in a usable position in the bathroom. Easy to install if your circuit box isn't too tight. Mine replaced a three-way switch, no problem. The night light has several intensity settings, including OFF, by simply tapping on it. Occasionally I do that by mistake when fumbling formthe rocker switch, but it's easy to correct if you do this. Much better than tying up an outlet with a separate night light.

We started using Le Grand switches about 15 years ago. We just did a redo and an older house to take out standard duplex outlets and hallway lights. We ordered a bunch of Leviton and Legrand illuminated wall switches in both single pole and three-way and the first photograph is of a Leviton properly installed. The other photograph is of a Legrand.The Legrand is not only a better quality switch by any comparison, But the illumination level can be changed to dim medium or bright. And when the light switch is activated the illumination remains on. These do require NEUTRAL WIRE for the light function to work.Go look up Legrand on Amazon they are available here in a variety of flavors colors and options. And I do not work for the company I'm just sick and tired of people thinking that Leviton is any standard.And if you look at the wiring instructions for a Leviton product they are printed on the inside flap which is gray cardboard and are absolutely unreadable. They didn't even have any incentive to put a piece of paper in there that you could actually read. Legrand not only puts in instructions but they haven't 800 telephone number which we had to use in order to clarify a three-way setup that we were doing with regards to the traveler wires.. ..and guess what?...a real HUMAN BEING answers the phone.......press 1 for switches, and press 2 for tech support...and within 6 seconds (I wear a Rolex)......a HUMAN BEING picks up the phone and speaks ENGLISH!....... YES.... ENGLISH!........ask for Todd...Legrand wins.

Works perfectly

The switch itself is really outstanding and I would give it five stars. The instructions are cryptic and completely inadequate. I installed it, and the nightlight would not work initially. Then I moved a wire between terminals, and the nightlight worked, but the outlet would not. I used a tester and found there was no way to connect the switch so that they were both working as they should. Before returning, I looked at the other reviews, and was very glad that I did. While not mentioned in the instructions, there is a fix.As another reviewer has noted, the nightlight will not work when you are using a single switch, or in single pole operation (as opposed to dual switches for three – pole operation), unless you use a jumper, or a single wire connecting two of the switch terminals to each other.The jumper should go between the black or common terminal and the white terminal – if the nightlight is up and the switch is down, then the two top terminals. The other reviewer suggested a jumper between the black or common terminal and the three – pole terminal. That works to an extent, but it cuts power to the nightlight whenever the switch is in the on position, which resets the nightlight operation.In other words, the nightlight will go off and then cycle through five different brightness intervals. If the jumper is connected to the 3P terminal, then when you turn the switch on, the power to the nightlight is cut off, and you have to go through the nightlight’s cycles every time you use the switch.On the other hand, if the jumper is connected to the white terminal, then the night light gets constant power, and will not cycle – other words, it will “remember” your last setting, and you will not have to fool with it unless you wish to change it.It is essential that the incoming or “live“ wire be connected to the black or common terminal for this setup to work properly.

Sleek and modern, the night lite with adjustable levels is very nice for a bathroom.

Switch works great... here's how to wire it for single pole:1) Hot to COM (black pole)2A) If you want switch in up position to be 'ON' and night light on the top, connect Neutral to 3WOR2B) If you want switch in up position to be 'ON' and night light on the bottom, connect Neutral to SP3) Ground to Ground (green pole)

Didn't work for me, but all other LeGrand items I have are excellent, high quality products. Could be a wiring issue in this old house that didn't allow this to work where I needed it.

I like the fact you can adjust the night light level and that the night light uses a neutral line to operate instead of depending on a different types of light bulb types to function, which limits what will and won't work. Somewhat more work to also install using a neutral line but the night light will function no matter what is in or not in the circuit. The one drawback after I installed the light switches is the sensitivity of the light sensor to turn off the night light when there's light in the room or hallway. One switch was fine but the other switch I installed won't turn off unless a very strong light is shining right at the switch, the night light just won't turn off when expected.