RealTruck TruXedo TruXport Soft Roll Up Truck Bed Tonneau Cover | 272201 | Fits 2014 - 2018, 2019 Limited/Legacy Chevy/GMC Silverado/Sierra 1500, 2015-19 2500/3500HD 8' 2" Bed (97.8")

This cover was very easy to install. It required no drilling and only a 1/2" wrench and a tape measure. I bought this is a "used but like new" item on Amazon and the only thing missing were the installation instruction. I am pretty handy and was able to install the cover without having to look them up online. They are available on the companies web site though. Anyone with even the most basic mechanical ability should have no trouble at all installing this themselves. The only concern I have at all is that the Velcro on the sides will not last forever. The way Velcro works is that one side is a hook and the mating side a loop. Every time you pull it apart some of the loops are damaged and there are fewer and fewer loops to catch the hook. After a while the Velcro no longer works. Seeing as the loop side is sewn to the cover there is no way to replace it. Other than the possible future Velcro issue it fits perfectly and looks great. It is also very easy to use. There are two latches at the back that you release to allow the cover the be rolled up. These operate very easily. And rolling it up is also done very easily while standing on the side of the truck. It is made to be either fully closed or fully rolled up when the vehicle is moving. I had a truck the dealership lent me that had a "tri fold" style cover. I personally like this roll up style better. The tri fold has the advantage of being able to be unfolded and folded more quickly than this one can be rolled up. The advantage to this roll up style though is that it takes up almost no room when it is completely rolled up. Also, that folding style had a latching system that was much more difficult to use than this cover. The last thing I will mention is that this is supposed the be a more economical cover than others out there. I can say that, at least on initial installation, it certainly doesn't look or feel cheap. It looks good, feels well made, and operates easily.

I bought this quickly before our road trip. My husband normally chooses things for our truck but we were in a pinch. I needed prime shipping to get us a bed cover in time. It was an easy install and it looks pretty sharp. Man am I glad we got it. We went to South Dakota and we had heavy rain the entire week. Like flood warnings and road closures. Everything stayed nice and dry. We also like how we can use this to lock the tail gate with our 2014 Silvarado. Since it is a soft cover, it most likely will allow water to pool over time, but we wanted the full use of the bed, which hard covers don't allow. It's good quality so far and saved our butts on this last trip. I especially like it for when we take the truck grocery shopping now. I'm very happy that when we need to move large items, we can just roll up the cover. Sometimes you have to adjust the velcro for a smooth fit but no big deal.

I bought this 10 months ago when I bought a new 2014 GMC Sierra. The price was my deciding factor as it was cheaper than going to buy local, plus no tax here in MO! This is a pretty good kit and was pretty easy to install. This is not a 100% waterproof cover, there are very few that are. But I only get minimal leakage in the 4 corners, not a lot but enough you should keep anything cardboard away from the corners of the bed. I did have to go buy a different foam strip for the main header as I put the included strip too close to the center of the railing (near the cabinet/window). I bought a thicker foam strip from a local hardware store (window isle) and I should have bought the thickest they offered but I was trying to get close to the size that was sent to me. Install the foam strip as close to the inside as possible on the header/rail as the tonneau main beam sits directly on top of this. The corners of where the foam meets this header rail is where it leaks some into the bed. So far (1 winter, 1 summer) this cover has held up nicely. It is a very low cover and it does flap in the wind, not annoyingly but I know that bothers some people seeing it move in the rearview mirror. Go with a hard sectional cover if you're one of those folks or someone that doesn't understand physics/wind. UPDATE-June 2023. I've had this cover for almost 10 years now. The bungee straps that secure the cover when rolled up are pretty weathered, discolored, and stretched, but still functioning. The cover has held up really well, been through a lot of hard rain, hail, rolling up/down, and still looks pretty darn good with zero rips or stitching issues. I contacted the manufacturer about getting some replacement velcro, since it does wear out over time and the sides would no longer stay connected. I was fully expecting to pay for a kit but they registered my cover and provided a new cover (not the whole kit, just the cover) & velcro strips for the rails under warranty! I watched a couple of videos online of people changing out their cover/velcro, and tackled the project myself in about an hour. It does come with paper instructions, but it's always more helpful seeing a video of the steps. Figuring out how to get the (top) rail off the truck was a little tricky, it had been a long time since installation. Sliding the old cover off/on was fairly straight forward, just take your time so you don't rip it. Velcro pieces along the rails were easy to cut and change out. Everything went back together as designed, and of course looks like a brand new unit now with the new cover!

I had difficulty following the instructions so after I installed it wrong I watched a YouTube video and it cleared everything up. The cover fits like a tight glove and looks great. Seems to keep most rain water out. Looks like it will handle some snow load.

Simple install. Instructions state "If you have a box liner you may not need the front seal"; check the difference in height between the side rail caps and front box liner cap, if there is a difference use the seal. I tried it without and leaked at the front. Product finish is nice. Ice and snow don't seem to be an issue for it. Looks good on the truck. About $300 cheaper than dealer (but doesn’t have GMC embossed on it). Velcro sides get a nice seal, a lot better then the days of lining up, pulling hard, and snapping it into the buttons. To do it over would buy again, it also arrived in two days and I live on Northern Ontario.

Easy install. Fit perfect. Looks great. Great price. Shipped on Friday, received on Monday in perfect condition. Would recommend this Tonneau cover. This is actually my second one. Had one on a Ford.

Cover arrived on time. Fits perfect. Easy to install. It's advertised to be installed 20 mins. Will take like an hour or more. Will take about 2 hours if you got to remove an old cover from your truck. The frame has bolt on clips which are better than the buckle/fold I had previously.

Looks good and fits good on my 2017 gmc 2500 HD