Bushcraft Knife

This Flissa knife is very pleasant to use. Its comfortable grip is great. I am always happy to find a new opportunity to take it in hand and use it. It is very sharp and good for cutting open plastic blister packaging, and cutting the sharp corners off of paperback books. It can cut through a stack of 300 pages with no problem. It is 0.1 inches thick (2.5mm) which is thicker than most kitchen knives, but not quite suitable for batoning/pounding on for campsite processing/splitting of thick wood. This would also make a good self defense knife. The sheath is plastic and of good quality, but better for hanging on a belt than hiding in a pocket. It takes some effort to get the knife out of the sheath.

Awesome knife for the price. Buy several and keep them anyplace you need a handy knife. Well balanced, super tacky grip handle, razor sharp stainless steel, scandi grind is easy to sharpen, lanyard hole in handle, fits snugly in the sheath. As good as a Mora Companion at almost half the price.

I am impressed with the FLISSA Bushcraft Knife, Fixed Blade Knife with Nylon Sheath, Stainless Steel Blade. Obviously, comparing this to a Morakniv Companion, I find that this knife holds its own. Right off, I noted the sheath. Very good plastic and the knife fits in very tight, almost a little too tight. Use should loosen it. Ambidextrous too on fit. The belt clamp has a nice stiffness to it and is easy to put on a belt. The end is two pieces instead of a solid one. And it has a button hole for attachment to the button on overalls or a button dangler! I tried it and it works. The handle has a soft rubbery feel and feels good in my hands. There is a lanyard ring on the end. Now the blade was not Morakniv sharp right our of the box. It had a little rough spot on the secondary bevel near the middle and the whole blade did not cut Mora smooth. However, with just a little stropping it glided through the paper and now it rivals my Mora knives! The spine is not sharp enough to strike a ferro rod but neither is the Companion. Not a priority with me. I like this inexpensive knife. Especially now that it is a dollar cheaper than when I bought it. At this price point, I'm considering another. We'll see if it can hold up with use. Buy it. UPDATE: I have been using this Flissa knife for a while now and I am still very happy with it. It has kept its sharpness and I am able to keep it that way with occasional buffing. I bought a few of these knives, due to great deal for a very good knife, and I have given them as gifts. Still highly recommend buying them!

I blind purchased this knife during Prime Day for $8. As you can see from the photos, the Flissa (green on handle) is nearly identical to the fine Morakniv Companion I already own. Quality is comparable and it was less than 1/2 the price of a new Mora. Being made of stainless steel, it's perfect for a fishing box, car glove box, or for an emergency "go" bag. And being inexpensive, it won't be a big hardship if it were left at a campsite or otherwise lost. The only issue is the back spine is not quite sharp enough to use with a ferro rod to start a fire. So at some point I'll run a file back and forth a few times about halfway down the spine to sharpen the edge for this purpose.

Great knife, sharp and sturdy!

I've been using this Flissa to scrape paint on a stucco repair job. I also used it to scrape paint from some rough cast iron. I used it to cut some heavy raw hide stock down to project pieces. It dulls like any blade, then it takes a new edge well. I changed it from the original 20 degree grind to 25 degrees. Then, ended up bringing it back to 20, primarily because it seemed to dull at about the same pace with harsh use. I've sharpened it so much that the blade isn't as wide, edge to spine, as it was originally. Haven't seen any chips in the steel edge. Haven't seen any voids in the steel. I like the handle's shape. The bumps on rear pommel and front finger guard make it easy to keep my hand in the right place. The handle is long enough, for my man's size large hand, without rubbing on the outside of my little or index fingers. I like that the blade edge comes right down to the finger guard. Knives with a notch or no edge there make it difficult to cut cord or rope. It took me a while to get use to withdrawing the knife from the sheath. It seemed difficult at first. But now I grab the blade without thinking about it. The trick is to place my thumb on the sheath and pull up with fingers. I can also replace the knife in the sheath with having to look at it. The ridgid sheath makes the tool much more useful for a workman. The blade is a little thicker than the Mora Companion. And the spine is machined square, unlike the unfinished Companion's spine. The cost of any product is a primary component of a review. Both the price and the utility of this knife/sheath make it a very high value for the money. It isn't refined like a $200 blade made in the USA. It is mass produced in China and sold for about $10. It's a tool that I can grab for any use (abuse) and not worry what I paid for it.

This was a great little bait knife. it’s small enough to put in my backpack and hold an edge well.

The knife arrived razor sharp and will remove hair easily. The handle is very comfortable. The sheath can be worn on the right or left side, and the knife can be holstered on the right or left side. The sheath has a very tight grip on the knife. It takes some effort to draw the knife. The belt holder is reliable with easy on and off of the belt. The spine of the knife will not throw sparks. A bushcraft knife should always be able to throw sparks. I may purchase a few more for the toolbox and glove box.

Good blade for the price . You can afford to abuse it at this price and not be terrified of hurting it . That said it has last well and holds a decent edge and is easy to sharpen

Good product for the price

I like the rubber handle and plastic sheath. Makes it easy to clean and the sheath can click over your belt or pants rather then threading your belt through. Blade is a nice thickness with a fairly deep single chamfer at edge. Downside is I found it difficult to get a really sharp edge as it the edge would roll over slightly. Got it pretty good just need a fine touch on the last few passes. Good enough for a bait knife.