10 Sets T Pipe Connector Tee Clamp Fittings, Fits 3/4" EMT Conduit with PE Adapter Shims, Also Fits OD 1.000" Round Tube, Stainless Steel

I got these because I wanted to add support to a walk in run kit made from conduit that was fairly flimsy. I found that the conduit used in the run was not the standard 3/4” or 1”, but instead had an outer diameter of 1”, so my Maker Pipe connectors didn’t fit. This set was perfect because it fit the kit conduit perfectly, and the included shims made my 3/4” conduit fit well too. The connections are very secure now.

The product is very well zinc coated. not cheap stuff. I used it to connect ENT 3/4" metal conduits. It may not hold the conduits very tight. My project used eight T-clamps together and the result is tight enough.

Nice hardware, BUT the bolts are not long enough to attach a 1" outside diameter pipe.I had to buy #12 2.5 " bolts to make this work for Standard Pipe.

Used for golf simulator impact screen enclosure. Worked great. Bit finicky but worked.

These hold pipe in the horizontal and vertical positions. The horizontal grabs well and holds firm. I've found the tolerances to be too sloppy for a firm grip on the vertical section.If your build is capturing both sides of the vertical, it will work well. If you are relying on the holding strength of the vertical attachment, look elsewhere.

Sturdy.

This is an older design-3 pieces- that is impossible to put together by yourself. Every 1/2 inch pipe has to have a shim, so completing your structure is very frustrating. Get the 2 part ones for the 90 angle !

Don't have the best fit for 3/4 inch EMT tubing (0.922" OD) and are probably too small for 1 inch EMT tubing (1.164" OD) , but work good enough for 3/4 inch if you really torque them down. Don't know if I would be happy with them if I had paid full price, but I got them for a steep discount by buying a returned product, so they're ok.