Desertcart purchases this item on your behalf and handles shipping, customs, and support to Iceland.
🔋 Power up your ride with the ultimate eBike wiring upgrade!
The 1T2 Y-Splitter Extension Wire by baluoqi is a high-quality, IP65 waterproof 2-pin cable designed to extend and connect throttle, brakes, sensors, and lights on electric bicycles. Compatible with a wide range of eBike motors (36V-48V, up to 1000W), it features pure copper wiring and gold contacts for reliable signal stability, all packed into a compact 7-inch length perfect for handlebar setups.
| Asin | B0B1LWDH93 |
| Best Sellers Rank | #36,962 in Sports & Outdoors (See Top 100 in Sports & Outdoors) #15 in Bike Cables |
| Brand Name | baluoqi |
| Cable Type | eBike 2-pin |
| Color | 2 Pin Connector(2Femal to 1Male) |
| Compatible Devices | Brake, Gear Shift Sensor, Battery, Light |
| Compatible Phone Models | No Compatible Phone Models |
| Connector Gender | Male-to-Female |
| Connector Type | 2 Pin |
| Customer Reviews | 4.5 4.5 out of 5 stars (390) 4.5 out of 5 stars |
| Indoor Outdoor Usage | Outdoor |
| Item Length | 7 inches |
| Manufacturer | baluoqi |
| Maximum Voltage | 48 volts |
| Model | Y-1T2 Wire 2pin short |
| Number Of Pins | 2 |
| Other Special Features Of The Product | Waterproof |
| Part Number | Y-1T2 Wire 2pin short |
| Recommended Uses For Product | Electric Bicycle Conversion Kit Wiring |
| Unit Count | 1 Count |
| Upc | 787803855548 |
User
Works perfectly, quality wire but didn't help my project with ebikes light for turn signals.
Gotten this to split into the ebike signal&power wire for the rear light panel. Matched the ebike's head central controller connector perfectly, it is snug waterproof connection and even color coding is matching.Wanted to wire one of the split ends to front turn signal&voltage cables while the other end connects to rears.Never worked, even though I made sure and measured voltage that was going to the rear light panel and measured 12V which is also what the front sequential led signals take. There was flashing, always on right signal all the while rear ones worked normally, but in certain polarity exchange ebike head unit even threw some error code, E23 if I remember correctly. Perhaps I need specific electronic bridge or step up step down modules? Iiii dooont knoooow. But if you do please help what could do the trick as I'm desperately trying to get front turn signals working.Nice item regardless, and thankful there is supplier with this type of stuff. Rare yet cheap, thankfully quality is there as well.
User
Used to activate brake light on motorized bike.
I used this with 5 pin relay to activate brake light when brake lever applied on 4 stroke motorized bike. Worked as anticipated. 5 pin relay, yellow wire constant for running tail light, when relay triggered, blue wire to led flasher, then brake light on load. I used the red and yellow wires, one to ground, and other to trigger relay. Omit the black wire. This isn't the intended use for this wire, but it works perfectly. You will also need https://www.amazon.com/dp/B0CHJ7DTR7?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1and E-bike Hydraulic Brake Sensors Cable for Bafang BBS BBSHD Motor Power Cut Off US / not available on Amazon, I found mine on Ebay
User
Fits perfect to make a watertight seal
I spliced into my e-bike cable to supply power to a volt meter. No cables/ connections were damaged in the process.I also purchased a pig-tail to plug into the second connector on the Y-splice, which l hardwired to the voltage meter.All worked out great. It may be overkill, but I put heat shrink over my connectors since it rains a lot here.Cost seemed reasonable. It's nice to know the exact voltage rather than depending on the 5 bars of the panel.
User
Conveniently reasonably small size
I was actually looking for a three way splitter, to rewire my brake light so I’ll have one in the middle and one to the left and one to the right. I couldn’t find one, and by luck I saw this two-pack of two-way splitters. Just plug one into one of the arms of the other: 1 —-> 1,2,3.Yes, eventually I’d have thought of getting two single Y’s if they didn’t come as a two-pack.Still, only four stars because there’s no reason why splitters wouldn’t be made 1-->2, 1–>3, 1–>4, 1–>5,… What if I also wanted decorative lights to come on when I brake?
User
Good quality.
The value and quality of this cable met my expectations.
User
E-bike pig tail connection 2 pin
Good item and service.
User
Wire up more accessories
Works well for adding accessories to an ebike and maintain original functionality. I used this to add a 48V to USB charger port, inserting it where the headlight plugs in, and the light still works as expected.
User
Fit connectors and works perfectly.
Bought the short splitter to add a cell charger to my ebike. My only complaint is that there should be a really short version offered with little or no wire as this one adds around 18" of unnecessary wire clutter. Otherwise it did the trick, matches perfectly and works great.
User
Sehr gut
Passt perfekt
User
Conforme à la description
L'article commandé est conforme à la description, ce qui m'a permis de réparer mon speed pedelec Riese Muller. Je recommande...
User
quality piece
it is as shown.It works
User
Guter Ersatz
Dieses Y-Split Verlängerungskabel ist genau das, was ich für meinen E-Bike-Umbau gebraucht habe! Die Verarbeitung macht einen richtig hochwertigen Eindruck, die wasserdichten Stecker sitzen fest und sicher – perfekt für alle Wetterbedingungen. Die Signale für Licht, Bremse oder Getriebesensor werden zuverlässig übertragen, ohne Verzögerung oder Wackelkontakt. Die Installation war total unkompliziert: Einstecken, Kabel sauber verlegen – fertig!Besonders praktisch ist die Auswahl an Pin-Varianten, sodass man das Kabel genau passend zum eigenen System bestellen kann. Für alle, die ihr Ebike erweitern oder optimieren wollen, ist dieses Split-Kabel eine super Lösung. Top Qualität zum fairen Preis – klare Empfehlung! 🚴♀️🔌✨
User
Always on time
Excellent product, fit's perfectly.. also work great.
Trustpilot
2 weeks ago
3 weeks ago