BATIGE USB 3.0 & 3.5mm Car Mount Flush Cable, 3ft

This works great for my alpine aftermarket radio. I had an empty hole that a cigarette lighter shaped Port would have gone into in the higher trim model of my car. I put this in that hole and it fit perfectly, and then I ran it under the trim to my Alpine radio which I just installed. Works great and just as fast as the stock cable, and I connected it up with the aux out port on my radio as well and it works great. Nice quality, great price. Easy install. Aux and USB are both nice and solid, no wiggle. Nice to have both ports in one place and have it look factory.

Work great

I installed this in the center console where my parking brake is for an Acura RSX. Make certain that your USB plug or a USB stick will clear your parking brake lever when it is in the down position. Look SUPER clean and professional. 1) - For those who drive an ACURA RSX, I had to put this in the center console because there was NOWHERE for me to install in my dashboard. There just was not enough clearance for it to fit without it knocking into something. 2) - I also DID NOT want to lose my cigarette lighter because that is where I keep my Fast Charge USB which has 2-USB-ports for my other devices. I highly recommend you ALWAYS " dry-fit" this first. The installers did not, so they had to buy me a new car piece. =========== 1) - This WILL fast charge your phone, as long as you are plugging in a fast-charge cable to it. 2) - The AUX works great too. 3) - I am using "JetAudio", "Pulsar" and "Rocket Player" apps so that I can listen to my MP3 music simultaneously while on Google Maps.

I use this as an easy headphone jack and external drive port under my desk. It is out of the way and easily accessible. Installation was easy with the included bracket. Once the bracket was in place I just fed the cables through and tighten the nut. Then plugged in the cables. The headphone jack works perfectly. No distortion or poor connection issue like the previous connection I had. The USB port is another story. Connection to my PC is hit or miss. Sometimes it's flawless and works at USB 3.1 speed, sometimes it's only USB 2.0, sometimes it doesn’t recognize the drive. Nothing changes other than I cycle power on my PC. If the drive is plugged into the same jack using another extension or ny itself I have no issues. With this it's a roll of the dice.

I wish I had a photo of this. Unfortunately, I no longer have the car. I installed this on back of the center console on a 2010 Kia Forte for Uber. Everyone loved it! I'd keep a tri-charger with it and the aux cord alone made me a good bit of money the first night in tips! It's east to install and felt almost factory. A simple hole saw was the only took I used. Just make sure you line it up! Unfortunately, aux cords on phones are becoming less and less common but this is still a great product nevertheless and comes with all the accessories to mount how you see fit!

Perfect fit for the factory-installed cigarette lighter replacement . No more usb wires hanging out the dash. This is my 2016 Chevy Silverado 1500LT

I used the adapters on my arcade machine. I made a highly detailed review for this BATIGE product. It's on the dual 3.0 port product page. So you can go there to read it: https://www.amazon.com/gp/product/B07C75L5V3 I'll just give you the quick summary which is.... USB 3.0 / 3.5mm audio adapter = 30mm drill bit and also dual 3.0 usb adapter = 30mm drill bit. 30mm = 1-3/16" (in fraction form) I will give you the link to the drill bit i used. It works well, it's a couple of dollars. Ships with amazon prime. I made 3 holes with this 1 drill bit and the drill bit looks like it could still keep cutting more holes. The 30mm drill bit you want to use is this: https://www.amazon.com/gp/product/B07R7TJ78V And you're all set! Note: The other holes (in my photo) is for the Dual HDMI connectors. Dual HDMI uses 38mm

Fit in my cigarette lighter plug perfectly and works but the audio quality is definitely a lot worse than the cord my alpine radio came with.

muy buenos materiales se siente de plastico muy robusto, la base para fijarlo fue una sorpresa agradable, sin dudas volveria a comprarlo

Installed in our 2007 hummer and it’s made well and fit perfectly in the factory cig lighter .

Have not installed it yet but the product looks great lm very satisfied with the build Quality

Very good product for after market stereo dash mount like a company fitmement in dashboard and data transfer all it s work very fast and smoothly

I haven’t installed yet but it looks like it will work. Came fast.