Samsung Full Motion Slim TV Wall Mount, Fits 56”- 75” TVs, Minimizes TV-to-Wall Gap, Adjustable Left and Right, Tilt and Swivel, VESA 400x300-400x400, Black (WMN-B16FB/ZA, 2022 Model)

This Samsung Slim Fit TV wall mount is absolutely fantastic! It lives up to its name - the TV sits incredibly close to the wall, almost flush. Installation was straightforward with clear instructions. The minimalist design looks very sleek and modern. Compatible perfectly with our Samsung Q Series TV. The slim profile makes the room look so much cleaner. Very sturdy and secure - no wobbling at all. Could not be happier with this purchase!

It had to be engineered by the Germans! Or should I say over engineered! But it works well. Easy to install and hang

I get constant compliments on how nice it looks having our tv flush to the wall. We hung an 85" Samsung on this and it's solid as a rock. Installation definitely requires time and attention to detail to make sure it's solid. Worth the price and would highly recommend.

Works well. Easy to install. Wish that there was more flexibility to hit studs. Some of the screws are adjustable but the two main ones are not.

This mount is fantastic for a flush type mount. Although my TV (Samsung 98" Class - Q7F QLED) was not listed as compatible it worked just like it was designed. My old pull out swivel could not keep this TV from hanging out at the top. Highly recommend!

Multiple reviews indicated that this product does not tilt up and down. However, it's clear that there's a spring-loaded mechanism to counter the load weight when the mount frame allows tilting movement. I initially resonated with the common concern and find it impossible to tilt even when the load is centered where I suppose is the only position when tilting is possible. I didn't feel comfortable pushing too hard on the wall with or without the TV. Later I tried to forcefully tilt it when placing it on the floor and it worked. It turns out that the 8 screws on the side were install too tight that prevented such movement or that there's no proper lubrication between the platic plates holding the middle panel. I loosened the 8 screws just by a little bit and added WD40 in-between the platic plates surrounding the middle panel and it worked smoothly. It should be safe to loosen the screws previously mentioned just by a bit because they are the ones countering the spring's rotational torque and are not used to hold the weights. I am getting a replacement of the item anyway because I find excessive rust build-up around the screws while taking it apart. I suspect it is also related to the poor tilting performance. The mount is really smartly designed but the manufacturing quality made installing it and using it a less exciting experience.

Before buying this I read the reviews, good and bad. The bad ones pointed out things that are not problems with the mount itself, but with whether people bought a suitable mount. The parts that attach to the wall are about 18" wide for my configuration, so it's designed to be centered with respect to 16" studs. It tilts and swivels just fine, but I can't vouch for TVs not explicitly listed. If it's not going back flat against the wall, it's because it was tilted up or down, which is normal. This extends away from the wall, but the primary advantages for me are easy access to the back of the TV and that it puts the set less than an inch away from the wall. If you have it against the wall, tilting is a moot point but if you pull it away from the wall, it tilts fine. The maximum extension is about 6.5 inches with the set parallel to the wall and not tilted. If it's swiveled, the maximum to one side would depend on the size of your TV. For the correct size, be careful. Make sure that the one you are buying is spaced for specific VESA spacing for your set. These are not general purpose. Samsung's 2026 83" sets use a 400x400 configuration. Their 82-85 mount does not. The 56-75 mount does. The specs for that one say that it's good for up to 88.2 lbs. My TV is 89.3 lbs. Samsung did not rate it in 2022 for 2026 sets, so if you want to take a chance holding a set that's 1.1 lbs and eight inches more diagonally, Samsung does not officially support it. But it's what comes up on their website as "frequently bought together." Ratings are based on passing certification with actual TVs, not theoretical maximums. If you are mounting on concrete, directly between studs or on plywood attached to studs, this is suitable. Otherwise, find something that matches your specs.

As a mount, it works fine. "Full Motion" seems overstated, as there are only 2 axes of movement--toward and away from the wall in the horizontal plane, and a lateral "swinging" to change the viewing angle from left to right. There is no tilt functionality, which was surprising to me, but I should've read more closely, so that's my bad. The swinging angle adjustment is rather limited, in my opinion, but it does in fact do what it says on the tin. All that being said, it appears to be sturdy and is a B+ for low-profile since it sits close to the wall but is nowhere close to invisible (see picture). So, if this is what you're looking for and know it, this is a decent prodcut. We had it installed professionally for our 55" The Frame tv, which on a related note is a beautiful art frame and astonishingly awful tv with the worst UI I've ever encountered (seriously, my decade old smart tv from back when they were selling tv's with 3d glasses is easier and faster to navigate). Anyway... because the tv was so unusable as our primary media viewing center, I wanted to remove it from this mount. The installer took the instructions (though I can't verify whether there were any in the first place), so I tried to find instructions or a manual by searching online. There is NOTHING. This search, combined with chatting, texting, and calling Samsung customer service yielded precisely nothing of any use. Suffice to say, the humor of Samsung not being able to provide a manual for a product with their branding on it that is sold on their website was lost on the representatives that I interacted with.

This is wrongly advertised and doesn’t support TV’s with a 400x400 vesa mount like the Samsung s95d 65 This supports vesa 200x300 or 200x200 TV’s only

⭐⭐⭐⭐⭐ Geniale Halterung – Ultraflach an der Wand und trotzdem voll beweglich! Wer seinen Fernseher so flach wie möglich an die Wand bringen möchte, ohne auf die Flexibilität einer schwenkbaren Halterung zu verzichten, ist hier genau richtig. Ich habe die Halterung für meinen Samsung TV im Einsatz und bin absolut begeistert von der Konstruktion. Das hat mich vollkommen überzeugt: Extrem geringer Wandabstand: Eingeklappt sitzt der Fernseher fast lückenlos an der Wand. Das sieht unglaublich edel aus und lässt den TV wie ein Bild wirken – kein Vergleich zu den klobigen Schwenkarmen von Drittanbietern. Mühelose Beweglichkeit: Trotz der ultraflachen Bauweise lässt sich der Fernseher butterweich nach vorne ziehen, neigen und schwenken. Der Mechanismus läuft extrem präzise und wertig. Perfekte Abstimmung: Da es sich um ein Originalteil handelt, passt alles perfekt zu den Anschlüssen und der Rückseite des Fernsehers. Verarbeitung: Die Halterung ist massiv, extrem stabil und hält das Gerät sicher in jeder Position, ohne dass etwas wackelt oder nachgibt. Fazit: Die Montage erfordert durch die flache Bauform zwar präzises Messen und etwas Geduld beim Kabelverlegen, aber das Endergebnis entschädigt für alles. Wer Design und Funktionalität sucht, macht hier absolut alles richtig. Jeden Cent wert!

Excelente producto, el montaje estuvo muy sencillo y viene con todo lo necesario.

Does and fits as listed!

Semplice da installare, rende lo spazio tra Samsung e parete al minimo. Consigliato!