ANEXT, 120mm USB Computer Fan Black, 120mm Fan, Silent Fans for Receiver DVR PlayStation Xbox Computer Cabinet Cooling, 2 in 1 Packs Black

I have my PS5 in a TV stand that doesn’t get a lot of airflow. Heat buildup was a huge problem for me. I started using a box fan to try and move some of that hot air out, but then I decided to try these little fans. Money well spent. First, the price is great for what you get. They’re stout little fans, connected to each other with a wire, and connected to a switch that’s tied to a USB connection. Plugged into the back of my PS5, and with the switch turned on, they immediately turn on when the PS5 is turned on. They also run when it’s in Rest Mode, as there is some power still running for downloads and charging. You can choose to use the switch to run them, if you like. They’re extremely quiet, as well. I simply placed them on top of the PS5 in the cubby it sits in. Immediately, the temperature in the cubby is substantially cooler. Reaching behind the PS5, none of that trapped heat is back there anymore. They seem to create better airflow through the entire space, which I’m sure helps with the intake air as well. Very cool. This was one of the best buys I’ve made in a good while. I love my PlayStation. I want to make sure it doesn’t bake to a crisp, golden brown. If you’re looking for a cheap cooling solution for electronics, be it Playstation, Xbox, or any other hot gadget, check these out. I think you’ll like them. I know I’m a fan.

Bought this for my burning wifi router and modem that often froze when overheating. Plugged this guy right into the USB port on the router and I hardly knew it was on it was so quiet. Dropped it from 7 ft shelf and it kept on running, its built solid. Fits right under the box and looks great, perfect dimensions and it blows some serious air! Unbelievable functionality and value for the money. I even bought a second set for my cable box and it has never run smoother. Crazy improvement for this price!

My application was extremely niche, I think. I own a freeze dryer that really loves solid airflow. Up until now, I'd been using a clunky fan. This product was a great, slim, and elegant solution to my airflow issues. After removing one of the sides of the unit, I was able to use the built-in vent holes to feed the screws that came with the fans to mount the fans. I did remove the metal grill covers on one side of the fans. This was extremely simple to do. After securing the wires with zip ties (as well as the toggle switch controller), I reassembled the freeze dryer. It works like a charm! Noise: These do have a light hum to them when they're on. Unless you plan to have it next to your face, I don't think it's a deal breaker. No noiser than a standard computer fan. Certainly not as loud as an oscillating fan. Weight: It's plastic and some wires. It's very light. Build quality: Again, it's plastic. I had a little issue with one of the rubber feet popping off after re-screwing one of the screws into place, but nothing was damaged and I was able to make it work. Power: They're not going to blow your hair back. But they do provide consistent airflow along whatever you're aiming them at. Get these if you want to maintain the movement of air. It's a bit unrealistic to expect them to do much more than make hot soup more comfortable to sip. This is USB powered after all. Packaging: No frills. The box is solid. The fans were wrapped in plastic. I think there was a small information card. They don't anticipate that you need much education to plug these in and use the switch. Con: If you can call it a con... I think the cord length is perfect for what I'm doing. I had considered mounting one on each side of the unit to encourage the intake and outflow of air. But the cord was just too short for that. And the main cord going from the units isn't too long either. Luckily I'm right next to an outlet, but your situation may require another solution such as plugging the USB into an available port on your device or getting a USB type A extension cord. #notsponsored

I have a 3-4 year old PS4 slim that is starting to have some problems that might be related to higher temperatures from where I have it located in my TV stand. I bought the 120 mm dual fan hoping to cool it down. I've never purchased cooling fans for electrical equipment so I have no point of reference, but I'm slightly disappointed in the airflow on these. It is very quiet, it does move some air, I just thought on high that it would blow a bit harder. With that said, I can feel warm air blowing out the front of my TV stand which means the fans should be keeping my PS4 cooler. I was going to give a neutral 3 star rating and decided to bump it to four stars seeing that it's at least moving some air around the machine which should help, and because I also like the fact that it has a USB cable which will allow my PS4 to turn it on when I start it up. I will try to update my review in the future to let people know how well the fans hold up and if my PS4 problems go away.

I've been using the 2 pack of these for a couple of weeks as a diy-cooler onto my direct drive sim-racing wheel base, and they do a pretty decent job on low and medium settings and move some good airflow. On low, I barely hear them, and on medium I only notice them without any other sounds going in the room (TV, conversation, game/sim, etc). I don't really use them on high at all. I have them standing up blowing air across my wheel base instead of laying flat resting on their rubberized feet. This could maybe lead to some early wear on the bearings. They are wired as a pair and only operate as a unit, which I could see being a problem if one fan gets noisy but the other doesn't and I can't only opt to use one. However, the rubber feet are easily removed and the switch wiring could easily be re-wired to new fans down the road. The wiring and switch do not seem cheap or flimsy either. Pretty good value for the whole package, especially for my specific use. Definitely considering buying a single setup for our isp modem.

I got these because the laptop cooling stands on amazon all stink. I had a decent one but it died in like 3 months. I bought these to 3d print my own laptop cooling stand, still havent even printed the stand because these are huge with rubber spacer pads on the corners. I just place my laptop on them and it is a massive difference in cooling. These fans work extremely well for cooling laptop, powered by usb from the laptop. Highly reccomended just to place laptop on or build into a stand. Ill post a pictyre of the stand when its done this weekend. Dont waste 40$ on crappy fan stands with led lights, buy these and have a much ccoler computer. I forget the actual numbers but the temp was considerably lower with these fans on. Buy them.

Used for my Milsbo cabinet. Easy to install and, runs very quiet! I’ve had them for going on a year now with no issues.

Work great and quiet just as advertised.