Kelay 3 Buttons Car Key Fob Cover Replacement for Fiat 500 Peugeot Citroen Brava Bravo Evo Grande Doblo Ducato Panda Punto Remote Key Case Shell

Excellent replacement for the front and back of my Fiat key fob the new one looks just like a real key but its just for show and prob so they can charge more,but who cares it was cheap anyway,just carefully unclipped the front and back,then replaced them for the front and back of your original key,took under 5 min

The battery compartment/holder fell out of my original key and was lost (Couldn't lock or set alarm remotely) This was perfectly priced for me to dismantle and replace the battery compartment/holder without having to pay a fortune at the dealership for a new recoded key... well happy

Excellent!! Contains all you need to replace a faulty/worn out/broken key fob. Note: battery not supplied (CR2032 3volt flat cell) and the manual doesn't say which battery to use - it only tells you to take it to your dealer!! All the necessary parts are included in this kit and are interchangeable, except for the fixed battery connection plate. Your existing key blade will fit the new fob. All fittings and springs are the same, so can be changed out for the new ones - just make sure you get the spring tension correct, or the key blade won't flick out. The little FIAT logo is a soft alloy cover held on by three tabs which can be carefully levered open with a small flat-blade screwdriver - also necessary to pop open the four case clips. The circuit board (the most important part!) is a good fit in the new case. Assembly is fiddly; some time and care is needed, but it's worth the effort to have a new fob which works perfectly for less than 10 quid!

Bought this as my (used car) key was falling apart - I didnt realise the whole top cover was missing! I should have ordered the key replacement with tools, found it difficult without. But obce I got things apart, was very easy. I watched a good video which specifically detailed how to get the spring to work properly. And it works perfectly! So glad I bought this - I have a very nice new key now

It’s ok. it doesn’t fit a fiat florino van very easy. Swapping the case is easy. But the blade is a nightmare. The original key blade doesn’t have the corner off like the blade that comes with the key. 20 mins of jiggery-pokery and a grinder, and it fits. If you’re going to get the blade cut to match the original, then you won’t need to go through this.

Good quality. Easy to swap out the blade perfect replacement.

It was a direct fit for the existing Fiat key fob. Swapping the key blade over was not easy once the spring had been released. Swapping the electronics over was simple enough though.

Excellent, essentially a whole new key without the circuit board. Easy to swap parts needed as well.

Exactement la même que l'original fiat 500