Question 1

is it supposed to arrive in two pieces?  mine did and appears to have been at one time  hot glued together and will now not go back together easily

Accepted Answer

Certainly not how mine arrived. Mine was intact, installed easily (on top of a 30-gallon fiber drum from Grainger) and has been performing like a champ ever since. Does a much, much better job (with the same Rockler wall-mounted dust collector) as my previous "homemade" setup using a plastic drum and a pair of input/output hose connectors that sort of create a centrifugal cyclone effect.

Question 2

do these improve suction or flow?? i have a harbor freight collection system, flow has seemed to greatly be reduced. no clogs anywhere i see

Accepted Answer

I also have a Harbor Freight dust collector and I replaced the dust bag/filter on it with a canister filter. I recently added the Super Dust Deputy 4/5 cyclone to replace an old, less effective separator. I noticed that the suction nearly doubled - it is definitely a much more efficient design than what I had. I am using 4" hoses in my shop. I recommend the following:
1) Check that your hoses are attached to the correct fittings on the cyclone (Top opening goes to the Harbor Freight unit, side opening goes to you tools. (Note: I had to use a bungee cord to support the hose from the Harbor Freight unit because the hose's weight caused the top fitting on the cyclone to loosen.)
2) Make sure ALL joints are COMPLETELY sealed. Use X-Treme Tape® Duct Hose Wrap. It stretches and sticks to itself without adhesive. Rockler and Woodcraft as well as other stores sell it.
Hope this helps.

Question 3

Does this collect fine dust? The rockler one does not seem to.

Accepted Answer

No cyclone separator is 100% efficient. This one is about 99% which means that 1% (mostly fine) will make its way to the vacuum filter.
In my real life I am an air handling specialist, so this is just fact. Any cyclone you buy will never be 100% efficient, but this one is pretty good.

Question 4

Can you out a bag in the bin that the cyclone attaches to? To make emptying easier?

Accepted Answer

You could, but it would be necessary to be sure the seal at the top is complete and open the bag as far as possible.  The sawdust falls into the bin, it is not blown into the bin.  I have no difficulty emptying the bin without a bag in it.

ASIN	B09ZF9JQ7S
Best Sellers Rank	#88,057 in Tools & Home Improvement ( See Top 100 in Tools & Home Improvement ) #133 in Vacuum & Dust Collector Replacement Parts
Brand	Oneida Air Systems
Brand Name	Oneida Air Systems
Customer Reviews	4.5 out of 5 stars 96 Reviews
Included Components	Cyclone, 2x 4" Adapters, Fiber Drum, Lid Clamp, Gasket, Hardware
Item Dimensions L x W x H	16.5"L x 16"W x 43.6"H
Item Highlight	5 In Inlet and 6 In Outlet with 4 In Reducers, Fiberboard Bin with Quick-Release Latch, Static Dissipative Resin
Manufacturer	Oneida Air Systems
Manufacturer Part Number	AXD152045
Model Number	AXD152045
Number of Packs	1
Number of Pieces	1
Product Dimensions	16.5"L x 16"W x 43.6"H
Reusability	Disposable
UPC	850037706112
Unit Count	1 Count

Oneida Air Systems Super Dust Deputy (4/5 Deluxe)

Details

Details

Description

Specifications

Common Questions