Digital Salinity Tester for Salt Water - Waterproof IP67 Salinity Meter with ATC Large Range 0-200pp

Easy to work and accurate

Worrest

This item is essential if you have a Koi pond. It is very easy to use and is very accurate.

I have a salt water pool with a Pentair system. I recently had to replace my salt cell and found the Pentair cells had, literally, doubled in price in the last couple of years. I found a generic salt cell on Amazon for about $400 less than the Pentair. The cell does it’s job, the chlorine output is great, but there’s just one problem … the salt level always reads as “0” on the controller. I tried salt strips but have to wait about 1/2 an hour to get an accurate reading. I saw this tester on line and decided to give it a try. It works great! The device is easy to read, the reading seems accurate, and the reading is instantaneous. Exactly what I needed!

Quick and easy to use! Great for checking salt levels in our pool

Do not trust the readings on this device. It severely underreported my initial salt levels, causing me to add way more salt than needed. Now my pool is heavily over-salted, and I’m stuck dealing with the massive hassle of draining and refilling water to fix it.To make matters worse, when I tried to return this defective piece of junk, I found out I have to pay for the return shipping to China—which costs exactly what the device itself is worth

This is simple to use for a pond, but you need to know your variables for your pond to be able to use it. We use it to keep our Koi pond at .1% salinity. There is an accuracy margin that makes this difficult to be 100% certain, but we have pond plants that are a very good indicator too. We also keep it in the water for a couple minutes when there's a big difference between air temp and pond temp to be sure the temp reading is as accurate as possible. If we do it too fast, we can be off by .02%+. In 8 months, it has maintained its calibration and performed consistently. We make sure to rinse with distilled water and use a paper towel to soak up extra water drops without touching the nodes to ensure no buildup affects the readings. I do not fully submerge it. I have excellent water flow so the full pond volume moves through the waterfall 2-3× per hour though. Not all ponds are equal. This has worked very well for us, but if you have a slow pump, I recommend getting a sample in a cup/bucket on a stick to get a sample from bottom to top and measuring that. I get consistent readings in the waterfall and any spot of my pond. The temp is accurate to my pond thermometer within a minute or two. With winter, the meter is as warm as the house then I put it in 40°F or colder water, it needs a minute or so. In late summer when water and air were about the same still, it was pretty instantaneous. We also do the math on paper when changing water and adding salt back. Dual checks are important to preserve plant life and protect the fish. We might buy a more expensive salinity only someday, but you can be diligent and use this to *verify your results. You shouldn't ever blindly use a meter with living things. Always calculate by pond volume too. It's just what you do to be certain. Ther isn't a simple way to use salt in a pond. But there is a simple way to check on your results!