Leviton Decora Brush Passthrough, 41075-DBW, White

works great

While these are not a standard decora fit, they do perform their primary purpose and look nice while doing it, if you can find a decora plate that fits them. The brushes continue past the decora plate port and sit at the back of the plate, rather than fitting into the opening. Any additional ridges or rises in the back of the plate will thus make the plate sit too far off of the wall.

This review compares the following brush wall plates for use next to the  PowerBridge ONE-PRO . Photos of the specific product are in each product's review.Silver bristles: GE 87697 Single Brush Wall Plate (Plastic) : plate = cooler and more purple; slotted white; nice packaging On-Q WP1014WHV1 Cable Access Strap with Wallplate, White : plate = bigger; slotted white Leviton 41075-DBW Decora Brush Passthrough, White  (with  Leviton 80401-W 1-Gang Decora/GFCI Wallplate, Standard Size, Thermoset, Device Mount, White ): plate = not exact but close; slotted white; crinkly and wide-mouthed bristles Arlington Industries CED135-1 Cable Entry Device with Brush-Style Opening, 1-Gang, White, 1-Pack : (no user-visible screws, no further comments) Buyer's Point Brush Wall Plate, Decora Style, Cable Pass Through Insert for Wires, Single Gang Cable Access Strap, Wall Socket Plug Port for HDTV, HDMI, Home Theater Systems and More (White) : plate = not exact but close; Phillips/slotted white Fosmon 1-Gang Brush Style Opening Passthrough Low Voltage Cable Plate In-Wall Installation for Speaker Wires, Coaxial Cables, HDMI Cables, or Network/Phone Cables : Silver/Light Silver bristles; plate = not exact but close; Phillips/slotted white Vanco Industrial, Single Gang Brush Cable Exit Wall Plates, White, 4.5" H x 2.75" W x 0.22" D, Plastic, Qty: 1 : plate = cooler; slotted whiteSF Cable SF-1272 (not on Amazon): plate = brighter; slotted white; nice packaging with instructionsWhite bristles: RiteAV - Single Gang Wall Plate with Brush Bristles - White [Now Fits Larger Cables ]: brighter white bristles; plate = slightly cooler; slotted white iMBAPrice® (Pack of 2)White Single Brush Wall Plate - Single Gang Wall Plate with Brush Bristles : MATCH white bristles (worse quality); plate = cooler; Phillips white BATIGE Brush Wall Plate Anti-dust Wall Mount Panel Cable Pass Through Insert for Wires Single Gang Cable Access Strap Wall Socket Plug Port for HDTV HDMI Home Theater : plate = cooler and darker; Phillips metal****The Leviton 41075-DBW is just a set of bristles. It is most analogous to the RiteAV brush wall plate (because of the wide opening), except that the RiteAV has white bristles. This one definitely has silver bristles, and they feel thin, numerous, and crinkly. If that is the look that you want, then this is a good buy for you, but if you're like me and are looking for white bristles, move along.I also tried this with the Leviton 80401-W Decora wall plate, which is sort of an industry standard. The wall plate does not match the PowerBridge ONE-PRO, but it is close enough (compared to the competition) that it would work for the untrained eye.****Sadly, NONE of the brush wall plates that I found matched the PowerBridge ONE-PRO. When I talked to PowerBridge, their technical support rep said that PowerBridge should be coming out with their own brush wall plate in 6 months or more. All in all, I decided to go with  RiteAV  for the time being.

Great brush plate. I think this item has the largest brush plate opening for large cables to pass through. Easily pass power cords through opening.

2 major annoyances.The ridge that the brush is fused on to is about 1/8" too long vertically to fit into Carlon drywall mount wall boxes. Yet for most cable pass applications, drywall mount wall boxes are very commonly used.The inner frame plate of decora plus has tinny screws that don't extend much. It's almost impossible to screw them in. Had to use different low screws to make it work.

It works with a standard faceplate/opening for the larger "rocker" style switches. This piece comes with screws, and you screw it directly into the junction box. Then, you fasten the faceplate to the smaller screw-holes on this piece. If you're careful, you can position it so that none of the white plastic (surrounding the brushes) is visible. Meaning, I used this with a gray faceplate and, though the brushes are white/off-white, none of the white plastic is visible. Looks great! Only downside is that it's $5! Still, cheaper than many other solutions.

Good quality product as is all Leviton.Do buy "matching sets" as for these all brands are slightly different.I started with one of these and needed another. Both home box stores carried varioiusly different ones and they were all different - and importantly - look different from the front. So I ordered another one of these and put the odd one in the cabinet.

Because these are flexible, they are a little difficult to get screws to go into because they are not hard and rigid. Sometimes the screw just spins around instead of locking into the thread. Once installed they look fine and do their job.

It is what it is, works well for an application where a cable has a large end or, in my case, where a customer was constantly adding to their cctv system. With this plate I was able to add an extra cat5 through a wall drop several times without having to change the plate or drilling new holes, all while looking nice.

High quality pass through. Far more nylon strands than your typical inexpensive pass through. With the additional strands, the gaps between the wires fill in evenly.

Serves it's purpose, but it appears a little recessed when used in a standard decora wall plate. I was expecting it to appear more flush. Doesn't look great in my opinion.

Easy to install and use . Looks clean and hides the ugly cables !

Great product