Sovol SH01 Filament Dryer and Dehydrator - 3D Printer Spool Holder and Dry Box for PLA, PETG, TPU, ABS - Compatible With 1.75mm, 2.85mm Filament

Humidity is blocked inside the box as there are no vents and the holes on top to pass the filament are not practical as the printer could not pull the string out of the box

I've been looking at various filament dryers for quite a while (including on Aliexpress) and this seems to be the best thing going for what you get. There are several less expensive dryer boxes that will dry one roll at a time, but this is the only one that I've seen that will do two at a time (or one really large roll). Unlike most of the others, this unit also has a seal that the lid sits in, clasps to hold the lid closed, an internal fan, and shows the humidity (not just temperature). I have seen people modify other dryers to add some of these features, but after the trouble and cost of the modifications those boxes still only hold one roll at a time. This is still more economical than buying two un-modified single roll dryers. This dryer preforms quite well and has brought some life back into some of my older rolls of filament. Since this has a proper seal it will also keep a roll dry even when it's done. I now have a muti-filament (3) 3D printer and I have ordered a second dryer so I can keep three rolls plus a spare dry all the time while printing. You can set 3 different temperatures (40C, 45C, & 50C) and drying time from 6 to 12 hours. The box heats well and seems quite stable, and you can really only hear the fan when the lid is open (will update if it gets noisy). There are touch sensors for the three buttons on the front, and the backlit display is very legible. The external power supply gets warm but not hot and I've had it running for days without any issues so far. It has two filament holes on the top of the lid, with seals, and a seal for the power plug on the back. The only thing that would have been nice is extra filament holes on the back (or front) for alternative routing options. I'm quite happy so far and would recommend this over the single roll dryers (even if you only really need it for one roll at a time) 5 star product 🌟🌟🌟🌟🌟

Chegou com 5 dias de antecedência em relação à data de entrega estimada, me surpreendeu positivamente. Gostei muito do produto. Deferente de outros já adquiridos foi usado assim que saiu da caixa, preparado 2 rolos de filamento para impressão. Recomendo como o melhor custo beneficio que encontrei na Internet, principalmente para quem tem sistema multifilamento sem aquecimento como eu.

I already own a couple large 4 slot dryers, including the awesome Sovol SH03, and I wanted a smaller, more affordable dryer to sit between my printers to print from. This little guy fits the bill perfectly. Came packed like it was ready to be air dropped. Build quality was a lot better than I expected for this price point. Has nice latches and a good seal for the lid. Basic user interface, you select 40, 45, or 50c, and time between 6 and 48 hours in 1 hour increments. Only getting to 50c means it's drying is really focused on PLA or PETG, but it should work flawlessly to keep my already dry TPU, PA and the like fresh while printing without dragging a big dryer around. Oh, and the spool rollers are crazy smooth. Small ding for not having a filament port that isn't on the lid, but it's a minor thing.

Lo compre ya que tenia un monton de filamento que cada que imprimia parecia que estaba cocinando palomitas de maiz. Reparandolo completamente quitando la humedad, y dandome la posibilidad de imprimir Nylon y materiales compuestos con CF. Totalmente recomendado, es barato y aparte puedes usar el material directamente del secador. Lo unico que podria recomendar es adaptar un ventilador de escape para que la humedad salga, y sea mas facil o desatendido el proceso de quitar humedad ya que actualmente tienes que dejar la tapa un poco abierta para que no se acomule la humedad dentro, aun con gel silica veia que no bajaba de 30%, abriendo la tapa se baja a 19/21% de humedad.

I recently purchased the Sovol SH01 Filament Dryer to address moisture issues affecting my 3D printing projects. This device has proven to be indispensable in maintaining filament quality and ensuring consistent print results. ✔️ Key Benefits: Effective Moisture Removal: The Sovol SH01 excels at eliminating moisture from filament spools, preventing common issues like stringing, bubbling, and poor layer adhesion caused by damp filament. User-Friendly Interface: The dryer features an intuitive control panel, allowing me to easily set the desired temperature and drying time based on the filament type. Versatile Compatibility: With adjustable temperature settings, it accommodates various filament materials, including PLA, ABS, PETG, and more, ensuring optimal drying conditions for each type. Continuous Drying Function: The option for continuous drying is particularly useful for extended printing sessions, keeping the filament in optimal condition throughout the process. ❌ Areas for Improvement: Size Considerations: While the dryer accommodates standard filament spools comfortably, larger or wider spools may not fit as easily. It's advisable to check the dimensions before purchasing. 💡 Final Thoughts: The Sovol SH01 Filament Dryer has become an essential part of my 3D printing setup. By effectively removing moisture from filaments, it ensures smoother printing experiences and higher-quality results. Despite minor size limitations, its performance and ease of use make it a worthwhile investment for any serious 3D printing enthusiast. ✔ Best For: 3D printing users seeking to improve print quality by maintaining dry filament. ❌ Not Ideal For: Those using non-standard or oversized filament spools without verifying compatibility. 👉 Overall: 5/5 – A must-have tool for achieving consistent and high-quality 3D prints.