BLACKHAWK! 419002BBR Omnivore MultiFit Stream Light TLR 1/2 Light Bearing Holster, Right, Black, One Size

Ok, so this holster does exactly what i wanted in every facet of the game. Thumb drive release works great though there is not much of an audible click when the light locks in. I have not had the issue with the pistol getting stuck as some have have, but it looks like that issue might stem from the mounting thumb screw on the light, just make sure the two raised nips are horizontal in relation to the muzzle of the pistol and it shouldnt be an issue. Keep in mind, this holster is HUGE, its a tactical holster and will be fairly difficult to concealed carry with, i didnt buy it for that so its not an issue for me, but its just something to keep in mind. When using the blackhawk SERPA Quick Disconnect system the holster mounts comfortably and solidly to all serpa platforms including the thigh holster which everyone seems to be having an issue with. I have all of my serpa holsters set up with the QD mounts so it was a no brainer for me. I have tried this with every full size and compact pistol i have with a rail. it fit ALMOST everything perfectly. Basically as long as the tlr-1 or 2 light fit the pistol, it will fit in the holster. YES THIS HOLSTER WILL FIT A STEYR M9-A1 there is plenty of room. I know the holsters for the steyr pistols are hard to come by so i figured that deserved special mention. Mine is the M variant but it should work fine with the L9-A1 (or the other calibers .40 and .357sig) other pistols i have tested with it m&p 45 sig 226r sig 1911 traditional tac ops hk p30 beretta px4 springfield xd 45 tactical Polymer 80 glock build (polymer 80 frame and slide) TLR 1 would not fit (therefore the holster will not work with) hk45c Magnum Research MR9 eagle (walther p99 licensed clone) Springfield XD 45 mod 2 sub compact (not a surprise as its a sub compact, but i figured id mention it) I do not have any of those Recover tactical rail grips they make for the 1911 and beretta 92, but the way the holster is designed I dont see why they wouldnt work, but if someone does have one, they will probably mention it in a review. I'm very happy with this holster and because of its versatility ill probably never need another one, BUT if i did, i wouldnt hesitate to buy one

So this is my first wml holster. And for being what is I like it. Many times multi-fit holsters don't really fit all that well. Now I've purchased a few kydex molded holsters in the past and yes the fit was nice, but never one with a light attachment incorporated into the molding. I'm not gonna sit here any more and blow smoke, but this is a pretty nice holster. Once I was able to get the additional attachments into the right spaces things figuratively and literally clicked. The gun stays locked in. There's no wobble. The thumb button and draw feel as natural as any of the previous mentioned kydex molded holsters. If the need ever arose that I needed another holster like this I would definitely buy another one. Oh and don't be deterred if you have a hard time sliding the long attachment into the grooves. It'll get there.

Works great with my alpha foxtrot Romulus and the trl1h light fits like a glove, doesn’t move at all. Paired it with a blade tec system and it’s great. Side walls are super thick and strong. Keeps trigger covered.

Great holster, got the TLR-1 model and its fits like a glove for my battle belt setup. Great universal option with solid positive retention, use the blocks and fit them to your gun, they are needed. Clears red dot and suppressor height sights with ease, attached the quick release system also from Blackhawk and couldn’t be happier

Best bang for your buck holster, my Mete SFT and Prodigy fit perfect, the canik is a little snug but nothing crazy, for 65ish bucks you can not go wrong.

Aside from the fact this is a bulky and thick piece of kit, it does exactly what it is supposed to do. I tired a variety of different full size weapons all having TLR-1's attached, and they all fit exactly as they should. The only two noteworthy items are as follows: 1 - the trigger can be accessed (while covered) due to the gap/space between the trigger guard and the holster itself. 2 - the retention lever is not protected and uncovered, and thus, easily accessible. This creates the probability of a hostile take-away, especially if someone is not properly trained in weapons retention and are not maintaining appropriate situational awareness. Since this is not a concealment holster, and due to the two points above, I would say this is most suitable for training and range use. If you have a variety of mid or full size from different manufacturers that all have a TLR-1/2 attached, this is a pretty great holster for range or training use. 3.5 Stars since it's not well suited for duty/defensive applications, due to trigger exposure and the retention release not being protected.

Now... it's bulky for my Ruger 380 Security but it's not really made for concealment. The gun itself is basically the same size as the Ruger Security 9 Compact. I ain't hiding anyone in this puppy based on the clothes I wear, unless I start wearing trench coats. The bottom of it does look kind of like a weird battery pack or something and not obviously a gun if it's peeking from under your jacket so I guess that's something. And again - never supposed to be a "you can't find the gun hidden on me!" holster was it. That said, the pistol STAYS PUT and the button draw seems easy and intuitive. So that's a good compromise of safety and drawability I think. It feels nice in jeans with the paddle installed. I even had a "low sit" on a very low stoop wearing this and it was still comfortable. Again, it's pretty big but what did I expect when I added a TRL-1? You're gonna want that at night or in your dark house though, aren't ya. So I'm happy with it overall. Just don't expect to surprise anyone that you're strapped up... unless you wear some hella baggy clothes with which you can still reasonably quickly access the gun.

Produkt z wyraźnymi śladami użytkowania. Opakowanie uprzednio otwarte, poklejone taśmą. Woreczki z akcesoriami porozrywane- nie mam jeszcze pewności, czy kabura jest kompletna. Oczekiwałem nowej kabury- dostałem używaną. Słabo, więcej u sprzedawcy nie kupię.

Holds my airsoft hi-capa with TLR! If you want to keep your barrel attachment then I would recommend using a dremel on the underside to widen the gap.

使い始めたばかりのため耐久性は不明ですが、使い勝手はとても良いです

Holster très polyvalent, juste une précision qu il faut modifier la vis de serrage de la lampe TRL1 ou 2 des anciens model, pour ma part un petit coup de lime a suffit

ARMY STACCATO C2にレプリカTLR1を装着したのに合わせて購入。以前に同社製のSURE FIRE X300用も買いましたが、そもそもX300自体がワンタッチの着脱に主眼を置いた製品なので(レプリカだから余計にかもですが...)フラッシュライトだけホルスター内に置き去りにされる事があり不満でした。一方STREAM LIGHTはレールにネジでかっちり固定する仕様なので、こちらのホルスターとの相性は抜群(当方SURE FIREよりSTREAM LIGHTが好きな理由がここ）です。TLR1の下部にレーザーポインターが付いたTLR2にも対応しているのでX300用より縦は大きいですが、TLR1使用時に装着する下部アダプター・スライドのガタツキを抑える上部アダプターもS.M.Lの3サイズ付属しています。 当方は下部アダプターだけでもマルチホルスターとしては満足な固定が得られました。 個人的にサファリランドのホルスターが大好きですがSTACCATO+ドットサイト+ライト対応の機種が3万円程する事とホルスター自体が重かったので、今回はBLACKHAWKにして正解でした(お値段約1/3！） WILLYPEETさんオリジナルの変換アダプターを装着するとBLACKHAWKやBLADE-TECHのホルスターもサファリランドQLSが使用出来るので便利ですよ。