Jack Boss Motorcycle Stand Rear Combo Wheel Lift Stands, 500Lbs Capacity,Swingarm Spool Paddock Stands for Sport Bike,Fit for Yamaha, for Honda, Suitable for Kawasaki

I got this stand for use with my 2023 Honda Rebel 500. It is a single stand (not two “stands”) that comes with L-shaped rubber-lined lift brackets for under the swingarm and C-style lift brackets for swingarm spools or front forks. It was easy to assemble, seems plenty solid, and works very well, now that I have corrected a minor issue (my fault) that other reviewers have mentioned and should be aware of. When I first lifted the rear wheel, the lifting arms skewed to the left and the bike was not quite vertical. The rear tire was still in contact with the floor, and the bike seemed unstable. This happened, not because of a design flaw in the stand itself, but because I had lifted the bike while it was on the side stand (leaning to the left). The solution is to have the bike as vertical as possible before lifting it. I did this by placing a piece of 2x4 under the side stand, but having a friend help would probably be safer, especially if you have a heavier bike. Once I did that I was able to lift the bike very easily. I have not used it to lift the front wheel, so I can’t comment on that. Another thing to be aware of: depending on your exhaust setup, you may need to remove your muffler(s) in order to lift the rear of the bike because there could be an interference issue with the stand. On my Rebel this only requires the removal of one bolt and a clamp, but it’s still a bit of a pain if you’re just doing chain maintenance. There are upswept (or shorter) aftermarket mufflers that wouldn’t interfere with the stand. As other reviewers have mentioned, the distance between the lifting arms is actually 14.5”, not 12.6" as shown in the pictures, so check your particular bike to make sure it will fit. The 12.6” dimension is actually the height from the floor to the center of the lift bracket post, which only gets my rear tire (150/80-16) about 1/2” or so off the floor. Overall I find it to be a very good stand for the money, and I would recommend it as long as it fits your bike and you use it properly.

Works great to clean your bike, work on it and clean your chain. Bike doesn’t move at all. Also super easy to put together in about 30 seconds

The motorcycle lift works well; it's easy to place the motorcycle on its stand. The stand's construction is very good and seems sturdy enough for a heavy motorcycle.

Work great on my sports bike! Make sure you stand your bike upright before using the rear stand, as it could cause the bike to tip over. It does bother me a little that the adjustments do not fully lock in place when you tighten them. And usually require me to adjust them before every use. But they are solid and sturdy! Very easy to use

Works well even without swing arm spools, plus it’s easy to set up. preforms great and for the price especially! I use it for chain services, oil changes and, just for storage if I’m leaving my bike for a long time. Well worth the purchase.

Easily lifts and lowers my 400 lb motorcycle with one hand. Seems super stable with the bike on the stand, sure makes chain and rear wheel cleaning easy! Very sturdy construction, should last for years!

Great rear swing arm stand for the price. Sturdy enough for a 420lbs bike, no issue.

Fits Perfectly and arrived super fast Kawasaki z900 2025

only one lift came, wrong description.

Excellent item and excellent quality heavy duty 💪🏻💪🏻💪🏻

Fácil de utilizar