Dracaena.io 120mm AIO CPU Cooler - ARGB Remote Control, Quiet PWM ARGB Fan, Hydraulic Bearing Pump & Aluminum Radiator - for Intel LGA1700/1200/115X/2011/2066 & AMD AM5/AM4/AM3/FM2 Ryzen, Black

This is a great performing and versatile pump, radiator coil, and controller combination that has an easy to use remote included. All the cables and mounting components that you should need are included in the box for the compatible cpus. There is even a syringe of thermal paste. I found it really all-inclusive when assembling and hooking up. Although the smallest version of this cooler, with just a single 120mm fan and radiator combo, this system brings plenty of cooling capacity to your setup. The cooling effect is almost immediate in my experience, too, so the cpu temperature doesn’t get a chance to become too high. The installation of the pump onto the mounting brackets is misassembly-proof due to notches in the pump body so that you cannot install the metal brackets the wrong way. It takes a bit of patience to align the brackets, but this isn’t intended to be a clumsy and loose installation. The components are high quality and fit snug. The 120mm PWM fan generates very little noise and that is really only noticeable with the higher speeds. LED lights in the fan synchronize with the pump so you get a great dancing color display from both. The controller board LED cable can be either connected to the motherboard or not, if you’d like to use the included remote instead for lighting control. And, there are 6 ports of each, 12v 4-pin Fan and 5v 3-pin LED, on the controller for plenty of devices. There is even a connector to tie the case switch into the board for single button lighting control. To minimize space and allow versatile installation, the board doesn’t have a bulky case and includes a pre-installed adhesive foam backing. Just peel and stick. Mine stuck solidly on the first try. There are several programmed lighting effects and repeat patterns, beyond the typical single color look, and different light brightness levels. So, enough options to keep from getting bored. To top it off, the customer support is great with troubleshooting any installation and use challenges not covered in the paper manual. This was a welcome bonus when I had an issue with the LED lighting that turned out to be an installation error on my part. Dracaena made sure I was able to get the system operating properly and that is often lacking in other company’s support. Overall, this was a great deal for the quality of the components, easy of assembly, and thoroughness of customer support.

I ordered this Dracaena CPU water cooling setup to replace an existing water cooling unit on an old Intel-based (LGA 1366 socket) gaming rig. So glad I gave it a try! It's working like a champ, and helped resurrect my old PC. A search on my motherboard/CPU combo revealed I had an LGA1366 CPU socket design. This is a really outdated Intel processor design, but the machine was perfectly fine, other than the failed cooling system. Some people suggested that water cooling systems were no longer made for old CPUs, but this Dracaena system said it was compatible with a variety of LGA socket types, including my old LGA 1366. With the included adapter brackets and screws, I was able to secure this new cooling hardware on my old CPU, and it's keeping the CPU at temperatures lower than I'd previously seen! I thought the brackets would interfere with some of the transistors on the motherboard, and the CPU hold-down arm, but the included brackets had just enough offset to clear the adjacent hardware. I was pleasantly surprised. The screws that hold the pump to the CPU are spring loaded, so they keep tension on the CPU once you apply the thermal paste and screw it in place. Fan is relatively quiet as well. Your experience may vary, but in my case, it's a winner! I can't really comment on the LED lighting system. My old motherboard didn't have an LED plug/port. It cycles through a rainbow of colors, and I can't seem to change the scheme with the remote control. But I think that's a limitation of my system, not the Dracaena unit. But the lights are not a priority to me. I'm just glad it's keeping my CPU cool, and I can keep my old system chugging along!

Great price, took me a long time to get it installed + booting, though most of my issues were with my case, not the cooler itself. I could not get my computer to turn on using the included fan controller, but it works well when connected directly to my motherboard. Dropped my CPU temps way more than my previous air cooler. It looks nice, takes up less space, and syncs with my asus motherboard! I’ve only been using it for a day at this point, but i’m happy so far.

It's hard to find an AIO that fits a mid-tower. For some reason, I didn't see that many option here. A lot of triple fans, but not many single fan ones. This one came up. It's hard to fit it in due to not enough space (I have a triple fan GPU). I was able to install it in a vertical position. My CPU runs cool now. The reason for 4 star is because somehow, 1 cable (for CPU unit power) is much shorter than others. So, I had to position the hub very close to the CPU and couldn't hide it with the other cables.

Works great. It was a little interesting to put to together, but the instructions were good enough to get it done.

This AIO was easy to install and fits perfectly in my case. Everything arrived well packaged and instructions were easy to follow. It works with a wide variety of AMD and Intel sockets which makes it a great all around option. Build quality feels great!

This product has fan noise. Other than that it works great

I see a lot of people complaining about the install. If you’re capable of following simple instructions and understanding what pictures mean then the install will be easy. I had it installed and running in a little less than 45 minutes. It made a dramatic difference compared to the air cooler. Idle temps on a i7-9700k were steady at 28 degrees C. Heavy gaming in 1440 like Horizon the temps never went above 55 C. Great cooler especially at a 55 dollar clip. I HIGHLY recommend it. It’s also true RGB. Lots of different color choices and a few different cycle choices. You just need a case with a button for LED control or just use your reset switch to control it. The short 3-pin PWM connector coming from the water block can be plugged into any fan header on your motherboard. No need for extensions

The cooler works very well and i cannot hear a thing when my cpu is doing heavy work. But speaking of the instructions, it is the worst i met. It only shows how to mount it onto the case, but nothing about how to wire it up. So lucky that i am experienced. Also it does not come with thermal paste.... The instructions states it included thermal paste, i was lucky to have some around. But all boxed coolers comes with thermal pastes. This one does not

Sehr guter Kühler, kann ich nur empfehlen. Preis/Leistung ist Top. Sieht sehr gut aus und Kühlt sehr gut.

Have not really used it since I had comparability issue with a MSi motherboard and an intel 14 th generation cpu. Would not boot and ca not flash the bios. But I must say the cooler was easy to setup the instruction manual is understandable unlike other manufacturers. Installed it in under 30 minutes and everything seem to work the remote is a great add on and if you into rbg lighting there are plenty of plugins on the board they supply, same for extra fans. The board has plugins for fans to the f your motherboard does not supply enough. Great product build and easy setup.

Keeps the Ryzen 5900x cooler than the huge heat sink I had before. Left more room in the box to get at other stuff. The free fan slot has a filtered fan blowing air into the box to maintain a positive pressure of dust free air.

Core i5 11500に今まで使用していた水冷クーラーが3年目で突然冷却しなくなったため購入。 今まではITXケースにうまく納まっていたがこの冷却ヘッド部が今までの物より大きかったためマザーボードに対して垂直になっているラジエーターのファンカバーに軽く接触。そのまま使用。ハブと呼ばれる箱にケーブルを接続するがかなり大きいためITXケース内に収めておく場所を作るのに苦労した。ファンや冷却ヘッドが色々と光るが机の下に置いているので見えない。主に事務作業をしているがCPUコア温度は33℃辺りで安定しているしファンの音も気になるほど大きくないので良品と言えるのでは。