Vinyl 6D Carbon Fiber Gloss Car Wrap with Air Release Technology - 1 X 5 FT - Black

Good quality, looks better than most carbon fiber films, still acts like standard calendar film but once you learn the material it’s easy to work with. Note if you order less than 5ftx5ft its comes rolled xft height by 5ft long.

Good product, lasted about 2 years with being in the sun. Would probably last longer if you put ppf over it or kept it in the garage most realistic carbon fibor warp I've ever seen.

The quality visually of the carbon fiber wrap is very close to the real thing. It has similar depth, and if installed properly will be nearly indistinguishable. I’m not quite sure about the longevity of this wrap and how it will hold up, but I used this for interior wrapping so it will not be exposed to the elements. The gloss is quite good too, there is minimal orange peel. I would be more than confident to wrap a large body panel with this product. Beware of overstretching, this can separate the film and the top gloss layer, as well as allow water to enter the two layers.

Full disclosure I WOULD NEVER use tinybot to wrap a entire vehicle so prob means this review won’t get posted BUT HERES THE KICKER this 6D carbon fiber LOOKS legit. Buddy has a race car and the hood didn’t match since he changed his hood exit for the turbo so with a few days before racing he asked if I could wrap it real quick. It’s a custom color nothing will match so I said sure I know this Carbon Fiber that LOOKS really good compared to EVERY BRAND OUT right now but I can’t attest to its longevity OR quality control but it LOOKS good. Order the tiny bot 6d, peal the protective layer and boy it looks good in person! There’s warnings about water possibly getting under the layers and such so for regular cars if you don’t seal the edges it’ll prob be a issue BUT for a temporary Race car hood it’s def awesome! Air release and adhesive does as it should, zero issues for a experienced installer

I ordered the 1ft x 5ft to wrap interior trim of my car. Material is the most identical to carbon fiber that I’ve seen. I’ve tried Avery Dennison, 3M, Vinyl Frog, & Vivid, but this by far is the closest. Appearance is a 5/5. Haven’t applied the material yet so I’m only giving it 4/5. Would recommend based off appearance!

Probably the most beautiful carbon fiber vinyl I've seen. It's easy to work with but the clear protective layer was very hard to get off. Mine kept ripping and wouldn't come off as one whole layer, I ended up tossing it out. But I got to wrap a few pieces. Great product, just wish the protective layer was easier to remove! Update: I ordered a second roll of vinyl and there was a tinybot logo stamped on there, which couldn't be removed. I will be returning it.

Honestly i’m very impressed with the quality. I have yet to use it but from first glance it has a lot of depth and is very glossy. Can’t wait to use it!

I really, really wanted to like this wrap. I watched Chris on CK Wraps YouTube channel use the exact film, and raved about it. I was warned by a friend of mine, who is a professional installer, to steer clear, but the Stek brand is out everywhere, and this was my only option to do a very high definition carbon fiber roof on my M3. I did the work in a very slow and methodical manner today as soon as it arrived. I spent a few hours perfectly wrapping the roof, sealing the edges below the weatherstripping, and everything looked fantastic. As suggested by Tinybot in the instructions sent with the film, I applied 3m seam tape on all edges not covered by the weatherstrip, which included only the rain gutters on each side of the roof. As I laid the the last strip of 3m, the piece of tape twisted over and made contact with the roof, sticking to a small spot maybe 1cm×1cm. I hadn't heated it yet, and gently pulled the 3m tape away. The gloss laminate on the Tinybot film peeled off with the 3m tape, leaving a hole in the clear gloss laminate film that, although maybe only 5mm round, absolutely ruins the glass look of the entire roof. This hole is not in the protective film layer that peels off during installation. It is the gloss laminate layer over the carbon fiber print, meant to stay on the wrap. $150 wasted on a film I cannot imagine would be able to withstand any type of real world use for any period of time on the exterior or a car. I am so disappointed, not just with the money wasted, but with the hours spent on the install as well.

Der Tinybot Vinyl 6D Carbon Fiber Gloss Car Wrap ist eine hervorragende Option für jeden, der sein Fahrzeuginterieur aufwerten möchte. Dieses Produkt kombiniert hochwertige Materialien mit fortschrittlicher Technologie und bietet so ein erstklassiges Finish und Langlebigkeit. Materialqualität: Das Vinylmaterial hat eine authentische Carbonfaser-Optik, die nicht nur optisch ansprechend, sondern auch fühlbar ist. Der Glanzfinish fügt eine zusätzliche Ebene von Raffinesse hinzu und imitiert das Aussehen echter Carbonfaser ohne die üblichen Kosten. Anwendung: Die Installation ist dank der Air Release Technology bemerkenswert einfach. Diese Technologie ermöglicht eine blasenfreie Anwendung, indem sie Luft durch mikroskopisch kleine Kanäle im Klebstoff entweichen lässt. Selbst für Anfänger ist das Anbringen dieses Vinyls auf Armaturenbrett, Türverkleidungen oder anderen Innenflächen machbar. Langlebigkeit und Pflege: Ein weiterer großer Vorteil dieses Car Wraps ist seine Widerstandsfähigkeit gegen Wasser, Hitze und UV-Strahlen, was es ideal für die Nutzung im Innenbereich macht. Die Reinigung ist unkompliziert; ein feuchtes Tuch reicht aus, um das Vinyl sauber und glänzend zu halten. Fazit: Der Tinybot Vinyl 6D Carbon Fiber Gloss Car Wrap ist eine fantastische Wahl für jeden Autoenthusiasten, der eine stilvolle und praktische Lösung zur Verbesserung des Fahrzeuginterieurs sucht. Die einfache Anwendung, zusammen mit dem atemberaubenden Finish und der robusten Konstruktion, macht es zu einem Must-Have für ein luxuriöses und langlebiges Upgrade. Fünf Sterne für dieses herausragende Produkt!

Looks realistic and good package.

Was a bit sceptical at first until I wrapped it. Tiny Bot 6D carbon fibre is a great wrap for your interior. Buy your 6D from here. Makes my commodore look awesome.

Not the easiest to install as it's thick and seems to have little adhesive. But worth the effort.

Lorsque installé tout était beau, 1 semaine apres voici le résultat... en attende de voir si il vont me rembourser ou en expédier un autre.. le wrap n'a pas été étirer ni chauffer et pourtant 1 semaine au soleil & il n'est plus bon. ( 2 dernieres photos sont au début de l'inatalation) (4 permieres photos apres 1 semaine)