701-1 Straight Cutter Elite Straight Matboard and Foamboard Cutter For Framing and Matting

Works great but it is a straight cutter and does 't cut bevels it won't cut bevels

Used with the "Logan 440-1 Team Cutting System" and now I can easily size and cut mats. Nice straight edges. I've mainly used it for mat board but it also has a foamboard setting that works well for cutting cardboard backing.

I concur with the reviewers who aren't satisfied due to the blade not being sharp enough and the design being a tad too flimsy. When using with Elmer's foam board, I've never successfully made a nice, one-pass cut. If I apply steady pressure, and start the incision on the inside of the board (not outside the edges,) I can start a nice, clean cut. But as I begin to approach the other edge, the blade begins to catch, resulting in a tearing along the incision line. I attribute this to insufficient sharpness of the blade and the light, plastic design. When you start, there is plenty of board to provide the resistance necessary to make this cutter work well. But when the board/cut-piece get closer to separating, the blade starts to catch, due to the low weight of the cutter and the blade not being sufficiently sharp. The best I've been able to manage is to make multiple, small passes instead of trying to cut all the way through the first attempt. It's never resulted in what I want, and I usually have to try and clean up manually with an X-acto blade (never finishes clean,) or toss the piece completely and try again. I really wanted this to work, and I've given it plenty of trial and error attempts, but without great results. I'm looking elsewhere and keeping my fingers crossed for something quicker, cleaner and more reliable.

I upgraded from just a razor blade Logan tool. It's an upgrade, but very plastic and not the weight I'd like to have for a straight cutter like this. The cutting technique you employ is key to success, but I won't buy this again, nor recommend it if money is not an issue. Easy to replace blades and use generally

The product is a great product, but the seller does not know how to write a listing... There are far too few details about this product. More information needs to be listed in both the bullet points and description section. It comes with blades, but it does not tell how many blades are included. For all I know it could have been none or just one, I create vinyl decals and always had trouble cutting them apart for packaging. Have even had to cut boxes down for packaging and this cutter does the job very easily, you do have to put it in the track, but once that is done.. it is easy to use. Handle is a little large, whereas I suppose i need to get used to using it.

The product did not work as expected, I bought waiting a perfect cut, but it is not possible to make straight cuts, it is made of weak plastic and does not run straight on the rail, which generates an imperfect and curved cut.

I've tried multiple things to try to make straight cuts for pieces of mat backing boards to mount artwork, but always had trouble getting all the way through the mat for the full cut, accidentally cutting at an angle, or coming off the guide at some point. This cutter holds the blade securely, is easy to hold, has settings for cutting foam or mat board, and rides on the edge and the top of the straightedge being used. Since you use your whole hand to hold and pull this to cut, it is much easier to work with than the less expensive cutters that are sized to use with just your fingers. It comes with some additional blades, and I like that it uses the same blades as Logan's other mat cutters. It is quite sturdy and feels like it will last a long time.

This is an attachment that fits into full sized mat cutters. I have not tried matting without the full sized mat cutter so I do not really know how it will go with using only a T-Square and ruler. But what can I say, this straight cutter cuts very straight and smooth lines. It came with a small package of blades to replace in case they get dull and the blades are super easy to change. Don't think I can say anything bad about something that does it's job so well. The only complaint would be the small package of blades it comes with. It could be easy to lose or misplace.

Eine Enttäuschung! Ich benutze den Logan Passeparoutschneider und bin von der Funktionalität und Qualität begeistert. So fiel die Entscheidung für das Logan Schneidemesser als Senkrechtschneider leicht. Das Angebot, noch heute öffentlich, versprach beste Qualität und eine Stahlausführung. Geliefert wurde, schnell und problemlos. Aber das Messer selbst enttäuschte. Es ist eine billige Plastikkonstruktion, die selbst das Versprechen, gut zu den Logan Schneideschienen zu passen, nicht erfüllt. Es ist eine schlimme und auch noch teure Irreführung.

Easy and safe to use when used with the correct ruler and correct thickness mount card. Definite time saver and safe to leave out on the desk rather than a craft knife

I use it for cutting a straight edge on my mats using my Logan mat cutter. You don’t wanna try a cutting a mat using scissors. That’s a huge No! use one of these. They glide smoothly along the rail on my Logan mat cutter.

Tiene un diseño muy ergonómico y puedes graduar para profundizar el corte, excepto para foam de 10mm que no llega.

J'ai commandé cet article qui vient en complément de ma règle Logan. Ce traction droit est très pratique il n'y a pas besoin de forcer pour faire des coupes droites, beaucoup plus pratique que le cuter à main et fait des coupes très propres.La livraison est arrivée beaucoup plus tôt que prévue. Un objet qui me facilite mon travail sans effort, je coupe beaucoup de contrecollé pour réalisé mes maries-louises.