GlasTR EZ FIT Screen Protector for Nintendo Switch OLED [2 Pack]

I've tried several screen protectors for my Nintendo Switch OLED, but this Spigen Tempered Glass protector truly stands out. The EZ FIT tray system makes installation practically foolproof—no dust, no bubbles, and perfect alignment on the first try. The fit is precise and doesn't interfere with the dock or carrying case. Clarity is top-notch; you honestly don't even remember it's there when playing. I'm especially impressed by how smooth and responsive the touch remains even with the glass applied. It's tough—after a month of tossing my Switch in various bags, there are still no scratches or chips. Cleaning fingerprints is also super simple, and the coating helps keep smudges to a minimum compared to cheaper protectors. Getting two protectors in the pack is great value, and with Spigen's reputation, I feel confident my device is protected for the long haul. I highly recommend this for anyone wanting a hassle-free, premium screen protector that delivers exactly what it promises!

It doesn’t get any easier than this. If you’ve had issues installing screen protectors in the past (fingerprints, alignment issues, etc.) then fear no more! Spigen makes it easy with a built in frame that ensures you screen protector gets place in just the right spot on your device. I’ve used their similar products for cell phones and tablets in the past and they always work great! To install the screen protector start by going to a room with a low amount of dust and now blowing air (make sure your home HVAC and fans are turned off to avoid random dust and hair floating over at the worst time). Use the included wet wipe to give your screen a thorough cleaning. You can also use any standard wet lens cleaning wipes if you need extra cleaning. I tend to wipe and wipe and wipe until I can’t see anything on the screen at all when I tilt it into the light. You want to wipe it down so there’s no marks, fingerprints, smudges, dust specs, etc. visible. All you should see is the screen acting like a mirror when held at an angle. Once you’re set you’ll just place your Switch on a flat surface, peel the back film off the screen protector, and then sit the alignment bracket around your Switch. Rub back and forth on the strip in the middle where indicated to adhere the protector to the screen. After 30 seconds or so you’ll peel the center tape away and gently separate the alignment bracket from the Switch. You then use the included squeegee to slide any air bubbles out from under the protector and off to the edge of the screen. If you did a good job cleaning the screen and didn’t have much dust floating around then you might not even have any bubbles to worry about. Finally you peel off the top protection film and you’re all set! The nice thing about this kit is that it includes an entire second setup. So if you mess up installing the first one somehow, or if you end up damaging it through normal use you’ll have a backup one ready. Once installed the protector is practically invisible on the screen. Clarity is excellent and all the touch functions work as expected. The only way you can really even tell it’s there is by looking for the edges of the protector.

Easy application, worth the money!

I was shopping around for glass screen protectors for my new Nintendo switch OLED and found many on Amazon including AmFit and iVolver but after reading many reviews and watching YouTube videos, I found that the Spigen one is the best for the OLED because as you can see in the picture, the screen protector almost comes to the edge of the entire screen which is great! In addition it was so easy to apply this product with the included tray to make installation a breeze with perfection. Alignment and adhesion is perfect thanks to the exact fit tray it comes in. And for an added bonus you get a second one in the box if you somehow mess up installing the first one or you break your first one. I would recommend any Nintendo switch oled owners to purchase this for protecting the screen from damage.

I absolutely suck at putting on screen protectors, they always get dust even though I make it completely clean before I apply it, I get the angle wrong, a few times while removing the last clear layer it would also remove the screen protector, plus countless others issues I have come across with other screen protectors for decades now. This one was beyond easy and it didn't even give me a chance to mess it up. It's simple, you clean the screen (I didn't notice it came with wet wipes, so i cleaned it with the included dry towel,) you then peel the "back" clear layer from the plastic device, then you put the plastic device onto the Switch's screen, then you slide your finger from left to right on the plastic (it tells you where) and you hold the right side down with that finger for 30 seconds, then you peel that "slide your finger" label off (which is stuck on tight, this is probably necessary to detach the screen protector from the plastic thing,) then you peel the last peelable clear layer and bam, it's done. if there are any bubbles (mine had 1) then you use that rubber rectangle that's included to get rid of it/them. I haven't used it yet, so I can say nothing about it's durability, all I can say is that I love that plastic application thing, I wish all screen protectors came with it.

This is a great screen protector. It was very easy to install with the tool they provide. I have had the same one on a OLED Nintendo Switch, that gets used daily, for at least 6 months now. No scratches or anything. I still have the spare that came with it also. I don't even notice to many fingerprints, and If I do.. I just wipe it down with a microfiber cloth and it's good as new.

Really good if put correctly, i just kinda hate that it would get a lot of air bubbles if any kind of dust is in the screen, but that's just the nature of screen protectors. Also too pricey just for two screen protectors

The kit is amazing... I can apply a screen protector without using frames because I've done so many I know how to line it up, but I used it because they're affixed to the frame. It was easy and true to the edge with it being perfectly, precision aligned. This screen protector is a THICK piece of plexiglass, not your standard garbage and it doesn't have any discoloring issues like some lesser ones I've seen elsewhere. Now, I have to state that I I did notice what I thought to be damage as it appeared to be a pressure mark creating a tiny fisheye in the plastic. I wiped it down with my 91% rubbing alcohol, but it didn't come off; however, I lifted up that side to wipe this one spot and sure enough, it was a simple mark from what appeared to be a machine that moves the glass around the facility prior to having the protective film applied. Upon cleaning the that bottom surface, the sheet was flawless and things like that can happen. I also bought their Rigged Armor case for the Switch OLED as well as the Rugged Armor carrying case in this purchase; everything they sell is quality and I'll stick with this company for everything from now on!

Sul produttore non c'è nulla da aggiungere, Spigen ormai è diventato il produttore al quale mi affido per tutte le protezioni dei miei device. Il prodotto è di qualità, di facile installazione e del quale fidarsi ad occhi chiusi. Sono presenti all interno della confezione 2 vetri temperati con 2 frame per il posizionamento e tutti gli accessori utili all' installazione. Zero bolle e zero problemi. Costa un po' di più dei prodotti offerti dalla concorrenza ma per quanto mi riguarda, l'affidabilità e la qualità vale ogni centesimo. Bravi

Fast shipping as expected, great product, easy to install as all Spigen products.

Nachdem Spigen mein Handy nun schon drei mal vor jeglichen Schäden bewahrt hat, obwohl das Schutzglas völlig zerschmettert oder zerborsten wurde, habe ich mich auch für meine Switch für Spigen entschieden. Das Schutzglas fühlt sich sehr gut an. Die Kanten sind leicht abgerundet, so dass es sich geschmeidig anfühlt wenn man den Finger darüber gleiten lässt. So sammelt sich auch weniger Staub an den Kanten und der Staub der sich sammelt, lässt sich sehr leicht wegwischen. Das Glas beeinflusst die Touch Funktion überhaupt nicht und verursacht auch visuell keine Unterschiede im Display Die blasenfreie Applikation war einfach und durch die Applikations-Schablone sehr exakt. Es ist jeglicher Zubehör dabei den man braucht. Meine Switch hat noch lange keine so schlimmen Unfälle erlebt wie mein Handy und ich hoffe das bleibt so, daher kann ich nicht viel dazu sagen. Ich kann aber sagen, dass das Glas nach einiger Zeit und trotz meiner Tollpatschigkeit noch keine Kratzer hat. Auch nicht an den Stellen, wo die Docking-Station für gewöhnlich irgendwann Kratzer verursacht. Das Schutzglas ist teuer, aber es ist das Geld für mich, auch meiner Erfahrungen mit meinem Handy nach, einfach Wert. Man bekommt ein Wertiges Produkt und es kostet immernoch viel weniger als eine neue Switch.

Protege muy bien la pantalla de la switch oled, es relativamente fácil de instalar ya que cuenta con su la guía como todo buen producto de la marca. No le otorgo 5 etrellas solo porque me quedó una pequeña burbuja (casi imperceptible) pero me fue imposible sacarla y no quise despegarla.

Perfect fitment