Question 1

Which pad do you guys prefer?  What do you recommend (2011 with swirls from washing/drying and a new 2015 that I will polish and wax upon arrival)?

Accepted Answer

He the same problems with a black car. Real heavy swirl marks. Used VSS from Chemical Guys with a orange pad sealed it with Jet seal and a black pad came back over with a microfiber applicator and BlackLight glaze.

Question 2

is this a velcro/hook and loop pad. is this the pad i would buy to remove light swirl marks on a new clear coat finish? thank you

Accepted Answer

The orange pad is for swirl removal generally with something like m 105. The white pad is for polishing to bring out the shine with something like m 205 but it does have a light cut for fine swirl marks.

Question 3

Do these pads stick to a orbital sander?

Accepted Answer

They have a Velcro backing. The pads are the "furry/loop" part. You need the backing plate (most are yellow) that attaches to the orbital sander.

Question 4

how do you clean them

Accepted Answer

This all depends on if you just want to clean them, or clean and rejuvenate them. If you just want to clean them and aren't worried about the foam pads tearing or wearing out then a good (mild) dish soap like Dawn will clean them. However a good Polishing and Buffing Pad Conditioner will do so much more. By using a Polishing and Buffing Pad Conditioner you will reduce friction so the pad will be less susceptible to tearing. Lubricated pads cut and polish with less wear and tear on the pad. The light conditioning lubricants inside add extra surface protection by reducing dry friction while polishing. A good Polishing and Buffing Pad Conditioner works with lubricants in the products you are using, providing extra needed lubrication to protect against micro-marring and the possibility of burning paint through friction. I use the Chemical Guys BUF_301_16 Polishing and Buffing Pad Conditioner ( https://www.amazon.com/Chemical-Guys-BUF_301_16-Polishing-Conditioner/dp/B0040MGUKI/ref=pd_cp_263_3?pd_rd_w=9EAYa&pf_rd_p=ef4dc990-a9ca-4945-ae0b-f8d549198ed6&pf_rd_r=9AY1HK00EBJ7VGF63EXQ&pd_rd_r=e1e9d9e0-2ea5-4850-a9f7-a88ed6374fad&pd_rd_wg=Z4aLG&pd_rd_i=B0040MGUKI&psc=1&refRID=9AY1HK00EBJ7VGF63EXQ ) and it works great. Cost about the same as the Dawn soap alone does but works so much better and the pads last longer with it too.

Cleans microfiber cloths and wool pads as well (do not use regular soaps on microfiber cloths because they will get gummed up). Once the pads have been cleaned shake them a few times to purge any water left inside the pad, and then let them dry in the sun for a few hours (velcro side facing down). Once dry you can then put them back into the plastic bag they came in, but do NOT put them in the bag wet or mold will form and ruin the pads.

ASIN	B0040MI9H0
Best Sellers Rank	#905 in Automotive ( See Top 100 in Automotive ) #2 in Body Repair Buffing & Polishing Pads
Brand Name	Chemical Guys
Compatible Material	Automotive Paint Surfaces
Customer Reviews	4.6 4.6 out of 5 stars (3,911)
Global Trade Identification Number	00816276013381
Grit Material Type	Foam
Grit Type	Medium
Item Diameter	5.5 Inches
Item Dimensions	1.73 x 9.37 x 7.87 inches
Item Weight	0.02 Kilograms
Manufacturer	Chemical Guys
Material Type	Zirconia Alumina
Model	BUFX_102HEX5
Number of Items	1
Part Number	BUFX_102HEX5
UPC	816276013381
Unit Count	1.0 Count
Warranty Description	Customer Satisfaction Guaranteed - See Packaging for Details

Chemical Guys, Hex-Logic Medium-Heavy Cutting Foam Pad, Orange, 5.5 inch | Medium-heavy, for paint correction and defect removal on 5 inch backing plates, 5.5 inch, works with dual-action polishers

Details

Details

Description

Specifications

Common Questions