Solsop Battery Cable Crimping Tool 6-50mm² (10-1/0 AWG) for Battery Terminal Crimper with 60PCS Copper Ring Terminals 8 Sizes and Cable Cutter for Heavy Duty Wire Lugs, Copper Lugs

Previously used a set of large manual crimps. Crimping 35mm² wire alone was a challenge and the crimps were never neat. These are great, crimp the wire neatly and so much easier to use than manual crimps. Did use the correct size first then swap to the next size down just to make extra tight, but don't crimp all the way with that one as you will break the crimp. As one of the cheaper tools on Amazon they are great value and perfect for DIY use.

Great item better than we thought Easy to use

Purchased for a project and worked well on 6 mm crimps. Haven't tested on other sizes but are sturdy crimpers. It is easy to select the size of crimp by pushing the pin in and rotating the jaws to required size. It would be good if crimpers had a ratchet mechanism to hold crimp as you feed the wire in prior to crimp but with a bit of practice not a big deal.

Nicely constructed. High quality.

Exactly what I was looking for. Works well and seems robust. Reasonable quick delivery.

Used to crimp 25mm^2 cables for six cables on a solar PV inverter installation where currents might be 120A for a sustained period. The Amazon sourced crimp set was already flawed/torn and thin walled so I bought a decent set with 1mm copper wall from a local electrical wholesaler at £5 for10 because I'm not going cheap at these currents. Although the crimp isn't fully even all round and a sliver is left on the far side, I could hang off the resulting crimp (80kg). Centre pivot between the handles had burrs that were removed with a countersink, and that allowed the nyloc to be pinched tight, which I did after the test crimp.

COMPLETE TRASH Manages tocrimp one wire and then the unit just kept leaking oil and then wouldn't pump /no pressure So i crimped one wire with this and it di it well. I thn set the crimper down to do other stuff and picked it backup a little While later to use again and oil poured out from the hole in the end of the fat handle.. The whole bottom part screws off to show a crappy plastic cap and a rubber reservoir and on further inspection has a what looks like two little pin holes in it that the fluid is seeping-out of into the main handle then when you pick it up runs out the hole in the bottom and all over you and your stuff. The handle you pump also has a stupid amount of useless travel.. And the dies dont even stay aligned up in the unit RETURNED… JUNK

This product is what I was looking for, it's easy to use and I prefer to have a grip or handle for crimping it much faster and cleaner. the product has a good sturdiness and also has a good price in my opinion. Thanks.