Oshlun LG-M01 Miter and Portable Saw Laser Guide, Miter & Portable Saws , grey

I’m quite happy with this accessory. It was easy to put on and doesn’t get in the way of anything. I put it on my 10in Bosch glide saw. I didn’t have high expectations for this but it is extremely accurate. I never take the saw out of my shop but I could maybe see on a job site or having it outside, that the laser might be hard to see. I haven’t tested this but in my shop, I have no problems at all seeing it. I didn’t want to go through the hassle of putting on a shadow line accessory and this seemed like a good value. I thought maybe it was going to be too large but like I said, it fits very well and doesn’t get in the way of anything. It’s been going strong for 6 months now and I’ve had no issues. Again, I haven’t tested this theory but I think it’s design will allow it to be used on just about any miter saw.

I recently purchased the Oshlun LG-M01 Miter and Portable Saw Laser Guide for my miter saw, and I must say that it has been a game-changer for my woodworking projects. This laser guide has significantly improved the accuracy and precision of my cuts, making my work much more efficient and professional-looking. The installation of the laser guide was straightforward and hassle-free. It fit perfectly on my miter saw and the alignment was easy to adjust to ensure that the laser line was accurate with my saw blade. Once installed, the laser guide provided a clear, bright line that helped me visualize exactly where my cuts would land, resulting in precise and clean cuts every time. I particularly appreciate the portability of this laser guide. It is compact and lightweight, making it easy to transport and use on different job sites or workstations. The durability of the guide is also impressive, as it has held up well to regular use and has not required any adjustments or maintenance since I installed it. Overall, the Oshlun LG-M01 Miter and Portable Saw Laser Guide has exceeded my expectations and has become an essential tool in my woodworking arsenal. I highly recommend this laser guide to anyone looking to enhance the accuracy and efficiency of their miter or portable saw cuts. It is a small investment that yields significant improvements in the quality of your work.

Many times on my old (30yrs) Dewalt DW-705 Miter saw I had wished there there was a laser to pinpoint the exact cut line, like most modern miter saws have. I've seen the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 on Amazon for a long time and finally decided to try it on my DW-705. In past reviews I've read some comments about the laser housing being too thick and rubbing against the blade guard housing. Ohslun mentioned that this newer model was thinner and fit more saws so I thought I'd give it a try. Installation was as simple as removing the orginal spacer and replacing it with the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞. I tightened down the blade retaining bolt and fired up the saw. My first reaction was well, the laser works, looks accurate but it was making a heck of a noise and seemed to be vibrating a little. I stopped and unpluged the saw and removed the laser guide. On close inspection of the laser guide I could see that something was rubbing against it (flub). I completely removed the blade guard to see what the situation was by removing the 3 T30 torx screws holding the blade guard assembly to the saw. What I discovered was that the laser guide was rubbing in one little area of the blade guard housing. Now that the laser guide had scrape marks on it I couldn't return it so I started thinking about a fix to see if I could add some clearance between the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 and the blade guard housing. The fix was easier than I figured it would be. One little flat washer mounted at the front and the rear blade guard mounting screws in such a way as to add 𝒋𝒖𝒔𝒕 enough clearance between the blade guard and the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 so that there was no more rubbing between the two surfaces. I Fired up the saw again and this time everything was nice and smooth with a clearly visible red line at the point of the cut. (I purposely positioned the laser line 𝒋𝒖𝒔𝒕 a bit off the pencil line to show everything is square). Lastly, I also discovered that a "thin kerf" blade may need no modification at all as I noticed more clearance between the 𝐎𝐬𝐡𝐥𝐮𝐧 𝐋𝐆-𝐌𝟎𝟏 𝐌𝐢𝐭𝐞𝐫 𝐚𝐧𝐝 𝐏𝐨𝐫𝐭𝐚𝐛𝐥𝐞 𝐒𝐚𝐰 𝐋𝐚𝐬𝐞𝐫 𝐆𝐮𝐢𝐝𝐞 and the blade guard.

Easy to install, works great makes accurate cuts easy. Especially odd angled cuts.

Bought this to install on my 12" Bosch sliding mitre saw. Installation was simple - just remove the bolt holding the blade and replace the blade washer with the laser light. Replace the bolt and it's ready to go. It puts a red line exactly where the left edge of the blade will cut. I've used it now for several weeks and no problems. Only thing, as mentioned by others, is that the saw must be running to turn it on. Once you get used to having the blade spinning to light the laser it's easy to make final adjustments to the workpiece. If necessary you may have to stop the saw (for safety) to reposition the workpiece but it's a small price to pay to get a really accurate cut. Since it's a mitre saw I'm not cutting large unmanageable pieces of wood so repositioning with the saw stopped doesn't happen very often. All in all a great accessory for the saw.

O produto é muito robusto e cumpre o que promete. Muito preciso na indicação da trilha de corte. Apenas aconselho a verificarem a compatibilidade com a sua esquadrejadeira, no meu caso, uma Stanley SM-18, tive que fazer pequeno (0,5mm) ajuste na arruela do disco, para que o laser desse o aperto necessário ao disco. No mais, funcionou com muita precisão.

Funciona perfectamente en mi sierra ingletadora

Qualité du trait impressionnant montage simple avec bague de adaptation pour l Europe

Great piece of gear, easy to install, clear guide, easy accurate cut.