MSI MPG Z690 Edge WiFi DDR4 Gaming Motherboard (ATX, 12th Gen Intel Core, LGA 1700 Socket, DDR4, PCIe 4, CFX, M.2 Slots, Wi-Fi 6)

This is a great motherboard. It feels very sturdy, the PCIE slot for the GPU is extremely stable, and the motherboard runs nicely. Instructions below for how I updated BIOS easily for 13th gen Intel. My only complaint with this motherboard is that the front panel connectors, which are already hard enough to plug in, are extremely hard to find on the motherboard due to TINY out of place writing and also it didn't come with anything to make it easier to plug them in. That was a pain. Otherwise this motherboard has performed very well and the BIOS interface and MSI support page/website are great. If you're trying it with a 13th gen Intel CPU it won't work until you update the BIOS. The best way to do this to avoid errors is to do the BIOS update IMMEDIATELY, before installing CPU or anything, really. First, using another PC, format a USB 2.0 32 GB or smaller as FAT32 with a default allocation size. Download the correct, recent BIOS from MSI's site (currently it's 7D31v19). Extract the main BIOS file directly into the USB with NO FOLDERS (don't leave it in its folder) or any other files and rename it to MSI.ROM Now once you get the motherboard out of the box, connect it to the 16-pin power to your unplugged/powered off PSU, and also to the CPU power to the PSU (use the plug on the left, CPU 1 / ATX power 1). DO NOT CONNECT ANYTHING ELSE, NO RAM OR CPU OR ANYTHING, JUST THOSE 2 plugs TO THE PSU. Then plug the PSU into the wall, and power it on (do NOT power PC on with PC power button, just flip switch for PSU power). Hook your USB up to the Flash Bios USB slot in the Motherboard. Push the Flash BIOS button once. It will flash red for a few seconds, then main motherboard lights will come on, including the fancy dragon. The red light by BIOS button will keep flashing for about 3-8 minutes and then you will see the motherboard power off then on again and the Flash Bios button red light will stop blinking and go dark. Wait another 1-2 minutes and then you can unplug everything and assemble the Mobo into your PC. If the light doesn't blink red initially but instead just stays solid read after a few seconds when you first try this, you need to fix your USB formatting / BIOS file or use a different one. For me this happened when my BIOS file was in a folder instead of directly in the USB with no folders.

This was written for a MSI Rewards Program Redemption This is only my second PC build ever, my first one was back in 2017 and I built a 6th Gen Intel system with a 1050ti. Back then I used a Gigabyte board and had a lot of issues with the BIOS and Gigabyte's utility programs, so much, in fact, I let the system stay at the default orange for much of the last two years just because I didn't want to go through the hassle. I digress, I decided to go with MSI this time around and highly recommend this board for a DDR4 12th Gen build. It has a small bit of RGB by the chip heatsinks and then the dragon logo, but nothing that will illuminate your entire house, which is what I was looking for, but the quality and BIOS are leagues above my 6th Gen Aorus. It's the highest end of the DDR4 boards, but very worth it over a lot of the other ASUS and Gigabyte options for the DDR4s. Pros - Great Quality Heatsinks Beautiful RGB Dragon Easily Labeled headers 4 M.2 slots and 6 Sata Ports Seems very DIY friendly Great I/O panel selection Perfect amount of on-board RGB for me Awesome Accessories - USB Support Drive and Screwdrivers came in very handy! Cons If you were looking for a super RGB board, this isn't it Mystic Light isn't the greatest, but the rest of the utilities are great Still trying to figure out how to overclock but that might just be my under-experience not the BIOS/Utilities I/O doesn't *Quite* line up with my case, but that could be an issue with Phanteks' case, it wasn't anything egregious, maybe a few millimeters Lastly, the PCIe ports are a little close together. My 2070S and USB expansion card are mere millimeters apart. It doesn't seem to effect anything during heavy loads but if the mini PCIe slot could be at the bottom instead, it would've been MUCH easier to install those two cards, I can't imagine what I'd do if I was SLI bridging two 2070Supers. Overall, I'd give this thing a 9.8/10. It's an incredible board with incredible quality, for an incredible new system. Specs: Intel i5 12600K MSI MPG Edge Wifi DDR4 32gbs G.SKILL Trident Royal Z 3200mhz 2x16 ZOTAC Twin-Fan NVIDIA 2070Super WD_Black 500GB M.2 4th Gen / Seagate 510 250GB M.2 3rd Gen / Seagate Barracuda 2TB 7200RPM Phanteks P600S Glacier White Phanteks 240mm T30 Glacier One Liquid AIO MSI MAG24C1 Curved Gaming Monitor 1080p 144mhz

El producto me llevó con un pequeño seguro suelto ( donde van los m.2) pero la pegue y pues todo bien. Hasta el momento funciona correctamente con 12th gen

Ottima mb la consiglio arrivata subito

Easy to install

Very good Z690 board with DDR4, very hard to find board with DDR4 that is good. Recommend.

Ya tengo varios meses con esta Motherboard trabajando con un i5 12600KF y todo muy bien, si van por un procesador de la 12a o 13a gen. consideren un buen enfriador líquido, de 360mm preferentemente