Desertcart purchases this item on your behalf and handles shipping, customs, and support to Iceland.
⚓ Command your ride with style and power — the ultimate marine switch panel for pros who never settle.
The DaierTek 6 Gang Marine Rocker Switch Panel is a rugged, IP65 waterproof 12V control hub featuring six blue LED rocker switches, dual USB charging ports, a cigarette lighter socket, and a built-in voltmeter. Designed for boats, cars, RVs, UTVs, and ATVs, it offers versatile power management and customizable labeling, making it the go-to panel for millennial professionals seeking reliable, stylish control over their vehicle’s electronics.
| ASIN | B09GTRFCJT |
| Actuator Type | Rocker |
| Best Sellers Rank | #10,513 in Automotive ( See Top 100 in Automotive ) #33 in Automotive Replacement Toggle Switches |
| Brand | DAIERTEK |
| Brand Name | DAIERTEK |
| Circuit Type | 6-way |
| Color | Blue |
| Compatible Devices | cars, trucks, marine boats, RVs, UTVs, ATVs, and devices with 12V to 24V accessory plugs |
| Compatible with Vehicle Type | car, truck, marine boat, rv, utv, atv |
| Connectivity Protocol | Usb |
| Connector Type | Quick Connect |
| Contact Material | Brass |
| Contact Type | Normally Open |
| Control Method | Touch |
| Control Type | ON-OFF |
| Current Rating | 20 Amps |
| Customer Reviews | 4.6 out of 5 stars 815 Reviews |
| Insulation Resistance | 100 Megaohms |
| International Protection Rating | IP65 |
| Item Dimensions | 7.48 x 4.33 x 4.33 inches |
| Manufacturer | DAIERTEK |
| Material Type | Plastic |
| Model | PN-L6S3-2 |
| Mounting Type | Panel Mount |
| Number of Items | 1 |
| Number of Positions | 6 |
| Operating Voltage | 12 Volts |
| Operation Mode | ON-OFF |
| Part Number | PN-L6S3-2 |
| Specification Met | Ip65 Water and Dust Resistance |
| Switch Type | Rocker, Toggle |
| Terminal | Crimp |
| UPC | 717664070347 |
| Unit Count | 1 Count |
B**1
Very Nice
Very nice panel. Fabricated a plate for it to mount to in my 2000 TJ and it runs my fog lights on one switch and ditch lights on independent switches. Will run a light bar to the fourth switch and still have 2 switches for future options.
T**T
Good quality easy to install
Installed in my boat, works great. Super easy to wire in. Very happy with quality.
T**D
i appreciate the pre wire so you can follow it hooking your own accessories/lights up.
Time will tell but so far so good... i appreciate the pre wire so you can follow it hooking your own gauges up. I didn't want the bottom light on all the time due to running at nights at times, so i did not connect the blue and yellow wire to the posts...the switch top light still illuminates when switch is on with those wires disconnected. I added another USB charger x2 ports with fast charge /volt meter combo in place of only the voltage # :) Those 3 items on the top are powered by the switch on the panel spiced into circuit i use for a GPS
J**L
Good quality
Installed on a boat and it works great for running lights.
S**T
Ok for the money.
It was easy to install but had to remove daisy chain for power so that I could wire each switch to its own fuse. For the money it works as should so far.
P**Y
6 gang switch
Nice switch looks great and wee built
R**T
Just installed it.
It worked first time out, no problems. The volt meter is hard to read, there is not much contrast between the numbers and the face of the instrument. Other than that it works fine.
W**Y
Bring all the grounds back to the battery
It’s working when you wire it up make sure everything goes back to the ground
C**I
Pre wired is meant for In-Line fuses
Wow what a great switch panel. The quality and the look was a very nice upgrade to my 1988 boat. I like the functionality of having a 12v socket to use for various accessories like an air pump for blowing up towables/water toys and the usb for charging various devices. The voltmeter is a very nice touch as well. The illuminated switches are very bright and it is handy that it comes with stickers to label each switch. The fact that it is pre wired is very nice, however, the way it is set up out of the box it is not able to be used with a fuse panel. How it is set up is favourable if you were to use simple in-line fuses to each device. To use it with a fuse panel you basically have to get rid of the whole line of red jumper wires and replace that with power coming from the fuse panel to the switch you want. You then would use the open blade (one that is open out of the box) to bring power to your device. Overall I would recommend this product I just wish this was stated because it was kind of confusing at first until I was able to figure it out.
F**O
Muy práctico
Quedo muy bien y fácil de instalar
D**7
So good
Well you are doing DIY projects? Working good. Just be sure you have enought clearance cause plug are large behind. Super quality i recommend.
A**R
Quality Fabric... Looks and feels excellent !
Item looks very good quality......... Delivery was excellent... But..... Too early to evaluate... I'll let you know later. Thanks.
D**N
Good work,
Good fit is it a wire be careful with the voltage gauge very delicate when you put on the wires one pushed in how to pull it out solder it. No big deal.
Trustpilot
2 weeks ago
1 day ago