Spears 1436 Series PVC Tube Fitting, Adapter, Schedule 40, Gray, 1-1/2" Barbed x NPT Male

I have used these for a while when the threads on the male end of my garden hose corrode so badly (metal) that I can’t get the nozzle off. (I’ve since learned to use Vaseline, which helps, but metal is metal). I have to cut off that end (which I now do also with any new hose that has a metal end), and replace it with this piece. Neither Orbit or other “store” brands work. They say they are for a 5/8” hose, but in reality the stem that goes into hose end is always a bit too loose. Because of this, even when you try to secure it with the screw on piece over the hose and this piece, making it as tight as possible, the pressure of the water makes this piece pop out anyway, or you have water leaking from the connection. These are very sturdy and reliable. Once on, there’s no leakage from hose or nozzle, unlike those from other manufacturers. It takes a bit of effort to get this piece into hose end (be sure end of hose is evenly cut), but with a mallet it can be done with patience. I’m an older woman, so I don’t have the strength to maneuver this piece into a hose end by hand. Once it’s in, I still use the piece that screws on over the hose further securing this piece…just to be sure. My hoses here in FL get *a lot* of use, and the threads on this piece held up for a few years before getting worn enough to cause a slight leak from the nozzle. (Not to mention the nasty effects of the heat and sun on *everything* here.) I have to take the spray nozzle off regularly to attach the power washer, sprinklers, etc., so these pieces get a real workout almost 365 days a year with all my landscaping, etc. It would likely last much longer up north.

Couldn’t find it locally, worked as described. Easy ordering, quick delivery.

Why did you pick this product vs others?: It's a plastic fitting.....really..... However, it was cheaper than others

I assume some of you are making a 2" adaptor for your pool's 2" backwash filter pipe, listen up. The OD of the ribbed side is over 2". If you use a hose with no give, like the Rhino hose, you will need to sand this down to get it to fit. I put mine on a lathe. If you don't have a land you're going to be doing some filing and sanding. Just be aware of that and all will be roses.

Used this PVC adapter on my commercial carpet cleaner and it fit perfectly. No leaks, no cracks, just solid quality. Been about five months now and it’s holding up great. Nothing bad to say, easy 5 stars.

Used this to connect a homemade heating system to my pool. Works great..great quality and fit. No leaking

Buen producto

Great for building out my pool pump system when I did not have time to run to the lumberyard.