ESR for MagSafe Sticker 360, MagSafe Ring, 2 Pack Magnetic Ring, Universal Magnetic Wireless Charger Conversion Kit for iPhone 17/16/16e/15/14/13/12/11, Samsung Galaxy, Google Pixel 10, Black

Got one of these for my Pixel 6a in an OtterBox Commuter case. I couldn't use the alignment tool because of the USB C cover on the case so I had to position it manually, which was oddly more difficult than I expected. After a week I ended up removing my first attempt because it wasn't quite in the right place for my grip, just a quarter inch too high, which really leads me to my one complaint about this otherwise great magsafe ring: the adhesive. It adheres extremely well to the rough texture on the back of the Commuter case, actually a bit too well. It was very difficult to pry up an edge on the ring, and my spudger ended up cutting into and smearing the adhesive around as I was working my way around the ring, leaving much of it on the case. I'm not sure what this material is but it's very sticky, breaks apart easily, and leaves a strange residue behind. An almost gum-like consistency. Some goo gone, rubbing alcohol, and elbow grease, and I was back in business, but man, what a pain. Swap that out with a nice 3M adhesive, something that tends to remove in a single piece, and can even be repositioned, and maybe include some or one replacement (even if it's a touch more expensive) and this thing would be perfect. Other than that, it's very thin and stylish, and it's rock solid with the magsafe accessories I've tried. I paired the ring up with the metal metisinno magnetic base and a popsocket, then the lamicall magsafe mount for my car. The latter fits right over the top of the popsocket and the magnets in the lamicall mount attract to the metal back of the metisinno base under it. I can leave everything as is when I move in/out of the car. It's the perfect setup for me, one I've been trying to find for years. At no point do I have any concerns about the strength of the magnetic connections between any of these. It takes real effort to separate them. Just triple check your placement of the ring, because you'll have a heck of a time removing it, and will not be able to reuse it after.

Comes with two MagSafe rings, which is already a nice bonus. I installed one on my Pixel Fold silicone case and it stuck securely within minutes. So far still good after a couple days — no peeling or shifting. Magnet attachment strength is great. Snaps right onto chargers and my OhSnap attachment with no problems. (Though you should note the ring is not a magnet itself.) Big win: wireless charging still works perfectly even with the ring installed. No interference at all. Fit is spot-on, install was easy, and everything just works. Pros: • Strong adhesion • Great magnetic hold • No wireless charging issues • Easy install • Two rings included Cons: (none so far) Would absolutely buy again.

I installed these ESR MagSafe stickers onto the inner case of my Samsung Galaxy S23 Ultra and Samsung Galaxy S22 Ultra OtterBox cases. I need to remove the soft outer case layer so that I can securely attach both phones to my OMOTON TP06 Magnetic Phone Tripod while taking photos. The magnetic hold and suction strength are excellent, and both phones stay very steady and secure during photography use. Using the ESR MagSafe stickers has made these phones much easier and more functional to use for taking photos, whether handheld or mounted as a tripod setup. I am extremely satisfied because this setup gives me much more flexibility and functionality when positioning my phones for photography projects. I would definitely recommend these ESR MagSafe stickers to anyone looking to add MagSafe compatibility to older Samsung phones that do not officially support OtterBox MagSafe systems like the newer Samsung Galaxy S25 Ultra and Samsung Galaxy S26 Ultra models.

Comes with everything you need to easily apply the ring onto the phone in a small package: wipes, rings, alignment guide, and instructions. Its quite durable considering the thin profile. Sticks surprisingly well and roughly works on even the worst possible cases. Just make sure to clean the surface well and firmly press down and hold so that the adhesive stays on strong. Took some effort to take it off, had to bend my case to do so. It also holds on very well to anything MagSafe related, was able to lift up my Anker MagGo charging stand by the phone. However, one downside I found that leads to me probably not using it is the sharp edges on the ring. I tend to hold my phone quite close to the palm and in addition, "slide in" my hand to grab the phone. The sharp edges make it quite uncomfortable to grab my phone. Regardless, I'd suggest giving it a try even with the problem of the sharp edges as it'll depend on the way you use your phone meaning you may not even run into the same issue I have.

I have a basic spigen thin armor type case that I really like. It’s basically scratch and moderate bump protection. It’s matte finish with a small molded in cross hatch type texture. I wasn’t sure these would stick well. So I chose esr as a known decent brand. Plus the specs show it as moderately thin. I have an old charger that works through the case without the ring, but the car has a built in MagSafe charger and I’m always fussing to find the right position. This works well. Helps to alight the phone quickly and better alignment means faster charging with less heat. The figment jig and template worked perfectly. Precleaning with pad provided and sticking on the ring was as simple as it gets. Perfects fit, feels durable, works as advertised - I’d say well worth the cost. Will save the second in case I have to replace my case.

For anyone to whom this review benefits know this: If you're looking to pair this up with a non-magsafe wireless charger with your magsafe case, know that this will not work for you. The ring holds next to no magnetic charge and its ONLY purpose is to turn non Magsafe Phones (or phone cases) INTO magsafe phones or phone cases. It has 0 value outside of that. Anyways, onto my thoughts below. Wasn't what I expected. It fits fine, the adhesion is strong, it was very easy to install and it was quite thin too. For $8usd I'm certainly not going to be too upset as it certainly cheap enough to not be upset about but it just doesn't feel like it did what I wanted it to. I was hoping this would be something where I could turn non-magsafe devices into a magsafe device. You know, so I could use my case and have it snap onto the metal ring and get wireless charging or holding something else. I do not think that this delivered on that front at all. Nothing about it appears to have ANY form of magnetic charge in the slightest, at least not in a meaningful way. It DID and DOES stick to my mag-safe case when it was just on its own, but once I applied it to the devices I was hoping would transform it into something I could more easily attach my phone to. It did not do this. Kind of disappointed. I can't give it a 1 star review because that would be unfair to the people who made this product, and this is merely probably an error on my own part. But I can't give it a 5 star review either because that would feel a little dishonest. Hopefully a 3 star feels fine enough.

Solid item I bought it for something bigger than a phone, and it delivers good value for the price. I use it with the ESR airplane mount as well, and it was able to support my Switch 2 even with some turbulence, which shows decent versatility. That said, if you shake it hard, it will fall, so the adhesion is good, but not perfect under extreme movement. For normal driving or airplane use, it should be perfect. The alignment tool also was helpful for positioning the MagSafe perfectly in the center.

BACK STORY: I really am satisfied with the MagSafe ring (Halo) holder / stand that I purchased some time ago, and have purchased several of them since then. I already had a case that I was really pleased with, but as it wasn't magnetic, I attached it using a several adhesive spheres from a third party and had no trouble. The case subsequently broke following multiple drops, but I bought the same one as I very much liked the case. This time, despite using the same MagSafe ring stand and the new pieces of the same adhesive, I couldn't get the ring to stay on. I even bought new adhesive, to no avail. I even purchased a new ring, just in case. That also wouldn't stay on with two other adhesives. REVIEW: I saw this listing and thought this item would solve my adhesion problem, particularly given the item description... "Upgrade to MagSafe Ready to Go Magnetic Want MagSafe but love the case you already have? With the HaloLock Universal Ring 360 you don’t have to choose. Just install to convert your standard case to MagSafe and start enjoying magnetic wireless charging and a whole host of accessories to snap on the back of your phone." It sounded like just what I needed. I cleaned the phone case as instructed then attached one of these rings. I gave it 24 hrs to cure, then attached the ring / stand, and everything fell off. The same thing happened with the second one I tried. I even bought a second set of these rings in case it was my mistake, but, for the third time, the ring would not stay on. Finally, I attached this adhesive ring to the back of my case using JB Weld (Professional grade) to attach this magnetic base to my case and it stuck. It held the actual Halo ring / stand on my phone with no problem. I've dropped the phone a number of times, and the ring stand has fallen off, but this magnetic adhesive base stayed on and easily attached that ring again. Other than the less than wonderful adhesive provided with these rings, I'm very satisfied.

Works with all types of magsafe accessories and is easy to install. I am using it with popsocket and magsafe power bank.

The product delivered to me was different from what’s posted. Looks like a cheap brandless metal ring. Does not have the additional magnet to help keep magsafe wallet in place. Still have to test if it will work properly with mag safe chargers.

Prodotto conforme alla descrizione, qualità ottima. Facile da applicare e funziona perfettamente con MagSafe. Venditore serio e spedizione veloce. Consigliato!

非常に磁力も強くて満足です

Muy buen producto