eXtremeRate Gray Rubberized Right Left Side Rails, Replacement Rear Handle Grips, Back Panels Faceplates Kits for Xbox One Elite Controller (Model 1698)

I can't speak for longevity yet but fit and ease of installationss very easy. Fit is spot on. I mean if you can change the batteries in the thing you can do this.

I was pretty skeptical about this product at first. I was mostly concerned that it wouldn't match the non-replaced portion of the grips, but that was not the case. I cannot make any distinction between these replacement grips and the original grips. The color and texture appears to be spot on and they sit flush with the remainder of the controller. It was a little difficult to remove the old grips, but it wasn't too bad. Once the old ones were removed these were pretty easy to install in it's place. They do give you a small prying tool to assist with the removal of the old ones, but it still required a bit of effort. I think I was just being overly cautious to not break anything. Anyways, if you are in the market for replacement grips for the ELITE 1 Controller, look no further. These absolutely will not disappoint you. I've been using them for about 3.5 months now and they are still holding strong.

The rubber part of the grips on my Elite Controller grew like one of those plastic dinosaur things you soak in water. Eventually the outer ones fell off (well, got picked off). These replace the whole outer grip panel, from the trigger to the end of the grip. The panels are just clipped onto the controller, there are no screws or anything like that. It's a little nerve wracking getting the first one off, it does take a bit of force and working down them (I used a guitar pick), but once it's off, and you have a good sense of where the clips & tabs are, the other one is easier. These just snap on. They fit absolutely perfectly, and make the controller look & feel brand new. They've been on for a couple months now and aren't showing signs of growing like the originals, so I'm hopeful that these will be on for the rest of the controller's life.

The good news is that this was a very easy repair. Even if the rubber isn't pealing from your Elite Controller (ver 1), you may benefit from having a textured surface again, as I forgot the feeling given that the rubber on mine was smoothed out from use. I just don't know how to replace the rubber on the inside as these are only designed for the hand grip part. Will cross that bridge when I get to it.

I have put 100 hours on these for my Elite and well worth doing. Better than getting newer Elite 2 which is different shape and may hurt your hands Got the white accent and looks great Old time gamer and this is a quality product with great fitment! Will def buy again down the road if I break it :-)

Like so many other people, I had the grip on my Elite v1 controller start to peel off. I was really annoyed because the controller was otherwise in perfect shape and I didn't want to replace it. I did some googling for replacement grips (people recommend Scuf grips) and while looking for those products I stumbled on this. I'm fine with disassembling electronics to repair them, but I watched the installation video and the side grips just pop off. They send a tool with the grip but once you see how it pops off you can just kind of wrench it off with your hand. The fit on the replacement grip is perfect. The plastic on the black one exactly matches the controller. The rubber grip part exactly matches the other rubber on the controller. I'm pretty picky and I thought "eh, better than buying a $180 controller" but it's perfect. You can't tell the difference. I'm kind of shocked with how cheap and easy this all was that MS doesn't just send these out to people for free, but $15 wasn't a lot to save an expensive controller. I'm really happy with this product.

After a long time using my original xbox one elite controller. I'm guessing a year and a half or something. My grips started to separate from the controller but the inside part but the outside back parts. The ones you can remove to begin taking apart the controller. Not that I ever did with my elite but that I'd done well over 15 times with the horrible, low quality, piece of crap controllers that Xbox somehow thought was ok to sell toits trusting customers. Seriously, after I had broken either the shift buttons or the thumb sticks had loosened beyond all reason or the controllers started to phantom drift or I guess zi squeeze them tight and the plastic shell around it felt loose and shifted slightly when I held it(enough to really bother me) on 2 replacement xbox brand controllers (you wouldnt assume they were so cheap at all considering the 70.00 cost of them). I had to resort to buying the off brands from Gamestop(like powerA and the like etc.) And get the year warranty and proceeded to return and exchange them over and over and over for months. Although, now to be honest if you dont mind the wired aspect, PowerA makes an amazing high quality elite level controller that costs like less than half the price of the elite or elite2 by Xbox called the PowerA Fusion Pro controller. Amazingly great controller that I cant believe is from PowerA. Anyways ,yes the replacement grips worked perfectly only downside was that you can kinda feel where the new grip starts and the old ones begin. Depending on how aggressive you are with your controller. I dont treat them bad or throw them or anything but in a heated game of DOA6 or Forza Horizon 3(not4) and especially Fortnite I can tend to grip them pretty hard so theres a ton of info that vears completely off course but that's the review.

The rubber on my grips was starting to peel badly on both sides. These are the perfect replacements. They look and feel identical to the original and even allow you to choose a nice little color accent. Replacement is 5 minutes work and the result is perfect! Highly recommended. They are even cheaper than most I saw on ebay

Encaja bien y se sienten como los originales

Absolutely fantastic. saved my expensive elite controller and was super easy to install and looks awesome. must buy if you have an old elite

Bought these to replace the grips on my Xbox Elite Controller (v1), where the rubber had stretched and warped. Visually they are close to a perfect match as I could have wanted. And having used them on the controller daily since purchase (May 2020), they feel great, and show no sign of wearing down so far. They came with tools to remove the original grips, but I found it easier to pry off with my fingers once there was enough of a gap to get a grip. These new ones snapped on securely with minimum effort. If your grips are starting to wear down on your Elite v1, look no further to make it good as new. P.S. Once you've popped off the original grips, check the rubber parts on the controller body - If you notice the edge lifting slightly, now might be a good time to put a tiny bit of glue under there to stick them down before it gets worse/unfixable.

Si como a mi me pasó, la goma de tu control xbox one elite se levantó y se vuelve incomodo jugar, esta es una excelente opción para alargar la vida del mismo. Es muy fácil realizar el reemplazo y la calidad es casi tan buena como la de los grips originales. No se dejen engañar por la foto, aunque parecería que el color es diferente al del control original, es prácticamente identico. Aunque el precio es un poco elevado, es mucho menor al de adquirir un control nuevo. En resumen, gran compra.