Cooler Master Hyper T20 Compact CPU Air Cooler, 95mm Fan, Dual Copper Heat Pipe, Direct Contact for AMD Ryzen AM4, Intel LGA1200/1151 (RR-T20-20FK-R1),Silver

I bought this to replace the stock air cooler on my Pentium i7 930. when I built the computer some 12 or 13 years ago I put a pelter cooler on it which worked great and kept the processor cool no matter how hard it was loaded. when it went out I put the factory air cooler back on the processor, it has always ran hot with the factory cooler on it even at idle it was extremely hot, 90 to 95° c was normal. if you loaded it down, the processor would overheat and shut the computer off. and that was not overclocked at all. now even running prime 95 the processor hasn't gotten over 60° c. with just regular usage it's staying below 38° c. Right now it is mildly overclocked running at 2.9. though it wasn't listed to fit an LGA 1366 processor, with just a little modification I was able to make it Mount up perfectly fine. The larger fan that has is also much quieter than the stock cooler fan was. I would think that unless you're really pushing the overclock and need a liquid cooler, this cooler should be perfectly fine.

This product receives a lot of critics from people because it requires you to apply the standard strength for it to be held properly in place. But from 20 years of experience the pressure required is actually perfect for heat-dissipation. Don't be fooled by critics telling you it's hard to mount, actually the design and engineering for it is quite easy. Don't be afraid to apply the necessary pressure to place or remove it. If the pressure required worries you, you should see how much pressure does GPU dies require for heat to be dissipated properly. Be mindful of the TDP for your processor. This won't handle overclocking properly since you need something more dedicated for it. But if you want a budget great CPU cooler without the hassle of adding liquid to the case this is one of the best choices.

Cooler Master is cooler. It has always been my go-to for my system builds. My PC is running at 27 degrees Celsius as i'm typing this. What's not to like?

I've had one before, and just had to get another after all these years after getting rid of my old system. I was previously using a Ryzen 5600X with the stock Wraith Stealth cooler. I had to undervolt the CPU from 1.3V to 1.2V, and was still getting a consistent 85C in many newer titles. After installing the Hyper 212 Evo, I was able to bring the voltage back up to 1.3V, and my temps never go above 75C. It's also not very loud. It's a little louder than. The stealth cooler, but once the headphones are on or the even my speakers are playing any audio at a reasonable level, I don't hear it at all. Need a good cooler for a good price? You found it.

Balders Gate 3 finished off my old H60 liquid cooler and I ended up replacing it with this cooler. Does a good job managing heat under load. I will note that the mounting bracket isnt the best quality and is somewhat of a loose fit so be careful when installing that you don't force anything.

I don't know too much about degrees and performance or whatever, but this works great with the i5-12400 Intel processor (a relatively non-hot, low wattage processor) and fits in my B660M motherboard perfectly when you use the brackets properly. It is also very quiet and efficient. Excellent cost-effective choice for anyone building a low-cost, high-performance build in 2023/2024. Why go expensive when this does the trick?

This fan cooled down my CPU like it should. Just make sure you apply thr thermal paste correctly. Good low noise, sturdy and easy to install.

The cooler works on my i5-12600K just fine, so long as you don't change off stock CPU specs. With a K version, this is going to be hard to do. Letting all the cores ramp up, will not keep the CPU below 100C. At stock with a case closed, a i5-12600K will be 76-85C on a Cinebench crush of multicore. Change settings to ramp all cores, it won't keep it from hitting 100C after about 4-6 min. At this price point of 55.00 USD, there are many better coolers out there for 12th Gen.

It works a treat!

جيده جدا وعمليه وتركبها سهل بس اوعي تكسر الريش

Buenas aqui dando mi opinion sin ser ni youtuber ni tiktoker, solo una persona comun y corriente, la verdad agarre en oferta el producto y compre dos disipadores 1 Cooler Master Hyper T20, puesto en Tarjeta madre b85m-g r2.0 asus, procesador i5 4570, usando los aditamentos para instalar el disipador en procesador intel, que vienen incluidos, sin ningun inconveniente, pasta termica usada MX-4, niveles de refrigeracion mejor al disipador stock 2 Cooler Master Hyper T20, puesto en Tarjeta madre ga-970a-d3p gigabyte, procesador fx-6300, el disipador entro sin problemas en la tarjeta madre, sin mas fuerza solo la necesaria, no se ocuparon aditamentos, incluidos en el disipador, sin ningun inconveniente, pasta termica usada MX-4, niveles de refrigeracion mejor al de stock Todo sin problemas funcionando, facil de instalar

Qualidade cooler master, fácil de montar , não é igual a outras marcas que você bota Tantan força para encaixa que chega a doer a mais ,aqui não é o caso , encaixa perfeitamente

Usually I’m a Noctua guy, but this seems on par with that and the more expensive stuff. It has a good reputation for a reason! Using with a i7-9700 which keeps it very cool and quiet. Much quieter than the previous intel stock cooler. I also appreciate the hum of the fan (when you can hear it) is a lower pitch. Really impressed with this one.