25 Packard 56 Series Male 16-14 Gauge Terminals GM 2971962

Had some wires get chewed by a mouse. I preferred to cut off the bad spots & repin the plug over just wrapping the bare spots in electrical tape. These worked great. Make sure you have the proper crimping tool.

Good quality and good price and quantity . Vey happy for this purchase . Make certain to use a proper crimping tool . Poor crimps result in loose connections and electrical issues .

for repairing electrical connections on older Chevy

I bought these to re pin a GM bulk head connector and they worked great. They are good strong material.

For the most part, these work fine. Be aware the quality control wherever they’re made at is not good, as you can see by the pictures. The very end is cut poorly and leaves a big tab on each side on some, but not all. I have a little hand grinder so I can grind these off with no problem, but be aware if you don’t have that capability, some of them probably won’t work for you.

This would never work, the blade end has excess material where they were trimmed off the stamping tree, you would have to trim/file each one to get them to work with the female terminals.

As mentioned with other reviews, many of these terminals come with large tabs attached at the end. This is because these terminals were removed from a reel instead of being actual loose terminals. There are two different parts numbers for each version from the manufacture, and they are different. The extra tabs are part of the strap that connects the terminals for reel use. Normally these tabs would be removed during the machine crimping process, but they're present here because these are being manually cut off the reel. They are perfectly usable, but the tabs will need to be ground off and chamfered to properly fit into the female terminal, so there some additional work required before use. Additionally, the relief cutout is different on the reel fed terminals vs. the individual terminal, shown on the side. This doesn't really affect the terminal with smaller connectors, but higher populated connectors may be harder to mate. As I said, these are perfectly good terminals after you modify them down, but I gave them 3 stars because the description doesn't represent what you're getting, and what is required to make them usable.