Advanced Graphene Ceramic Coating - 10H Graphene Coating for Auto Detailing, 9+ Years of Car Protection & Patented UV Technology

This is the third time I've used the Advanced Graphene one three SUVs. It requires technique to apply well. Doable for a beginner like me if you take your time and are meticulous while applying. I prepped the paint before applying and it turned out great. I do not have an ideal environment. I apply it in my garage within the recommended temperature range, the garage door open, and less than ideal lighting. The Adam's floro light helps a lot to ensure an even coat without missing spots. Every thirty minutes, I back the out into the sunlight to more easily identify high spots or uneven distribution to correct it before it's too difficult to correct. Then, I let it cure for at least 24 hours in the garage without driving. No bare or high spots on my third experience. The other two vehicles are two years in and still repelling well despite washing the car at home 6-8 times per year. I use Adam's Graphene Soap to wash and Graphene Boost as a drying aid while drying.

It rained hard today for the first time since apply it. It surprised me when I hit the gas and all the water slid off the hood at once and hit the windshield. Way easier to apply than I thought. Still takes effort, just not as hard as everyone make ceramic coating sound. I don't have a garage so I had to go panel by panel as the weather allowed and it turned out just fine. This was a much better use of my money than paying the dealer to ceramic coat it. I had enough for a larger vehicle and enough to redo a few areas I messed up. A couple notes: I saw a lot of people complain that it made plastic chalky looking. It sounds like that's a user error issue and it works fine for most people, but I didn't trust myself not to mess it up. I just got the stuff made for the trim. I also didn't test it on glass, I got the glass coating since it rains heavy where I'm at.

Great non professional ceramic coating that it's easy to apply and protects your paint from contaminants and sun damage. Package well and shipped very fast. I will definitely buy again.

Bought this again as I ran out of my first bottle and no regrets. As someone that started his journey down the hobbyist car detailing last year, this was a product that I tried (after various Reddit threads on this) and I was not disappointed. In terms of applying, definitely follow the directions and work in small areas at a time. Do not overdo it and try to cover larger panel; you will end up with high marks and excess product that you'll have to polish out (ask me how I know). My recommendation is to clean the car, iron decontaminate (maybe clay bar with lubrication if you haven't kept up with your car maintenance - to avoid marring); clean off the iron decontamination. Dry off car. Have all of your tools on hand (microfiber clothes, suede applicator, ceramic coating). Make sure you are working in a clean area, out of direct sunlight. In ideal situation, have a very well-lit area because you want to avoid high marks. Now, in terms of longevity, this has been amazing on 2023 black Tesla Model 3. There was intact hydrophobicity, water beading, even after a year of applying it. I do still apply Adam's Graphene Detail from time to time to enhance it. I only ran out of the bottle because I had to do some touchups from prior high marks and had to polish it off (see above). Applied it to a new Model Y and ran out mid-application so I needed to get another bottle. Overall, highly recommend this for its durability and longevity. Ease of use takes a mild hit as this is comparing it to the process for applying waxes (spray and paste), namely needing to limit to smaller areas and having more attention for potential high marks/spots with ceramic. Not enough of a deterrent for me, but something to be aware of if you decide to go ceramic coatings in general.

The jury is still out on this product. A lot of confusing how too on YouTube. I did the wait extra time to get more adhesion. To be fair they did the wipe off with a graphene spray (which I get today). Looks great until you put a UV light to the test and see all the "high spots" UGH. After buffing with some polish, the UV light showed a great surface, and you can see a very smooth and even flow of the product. I have been doing this ceramic coating since its inception and have to say it is not easy to apply correctly. However, once complete it is an amazing surface with guaranteed protection. You get what you put into the work. Fortunately, only did the top of the car so not all that much to redo.

Wasn’t sure if ceramic coating was snake oil or not. I applied it myself. It’s as easy as applying wax so no need to pay a detailer to do it. I clay-barred the car first. It really keeps anything from adhering to the car. Now, let’s see if it lasts for years as claimed. But so far, I love it.

I’m usually lazy when it comes to writing reviews. I only leave one when a product either completely exceeds my expectations or disappoints me to the point where I feel others should know about it. Unfortunately, this product falls into the second category. I paid around $130 for this ceramic coating, and I was shocked by how poor the packaging and overall presentation were. The was not box with the content, it was only the bottle itself no instructions, no applicator sponge, no microfiber cloth, and no towels for leveling or buffing the coating. I’ve purchased other ceramic coatings in the past that were significantly cheaper, yet they included everything needed for the application neatly packed inside the box. That says a lot about a company. This ADAM product spend money promoting a premium product but cut costs on the basic accessories required to use it properly. What makes it even more frustrating is that this isn’t clearly mentioned beforehand. As a result, I had to spend additional money buying the necessary supplies separately just to apply the product. I purchased it this time, but I won’t buy it again, and I certainly won’t recommend it to anyone. There are other brands that offer better value, include everything you need, and provide similar or even betterresults. More expensive does not automatically mean better. There was no option for half STAR.

I have been using this product as a detailing buisness owner for the past 4 years. It is one of the best consumer grade ceramic coatings on the market. If you are looking for a DIY ceramic coating, I would highly recommend using this one since it’s very user friendly. It has excellent durability, hydrophobic properties, and it makes every car we coat appear as if it just rolled out of the showroom. I will attach a picture of what it looks like on a clients car.

gets the job done

Did my car on the weekend with this coating, took my time doing small sections, before wiping off i reapplied fresh coat to rejuvenate just in case and everything wiped off without an issue, i think the problem most people are having is because they use too little of the coating on the applicator and letting it seat a bit longer than necessary, i kept my applicator quite wet and after doing an entire model 3 other than glass and wheels i only used half a bottle, most people end up using a quarter. Its been raining and car is beading like crazy from every panel and trim i applied coating on

注文をしたところ偽物らしきものが届きました。 購入者の方は以下の点に注意してください。 ①本来であれば真っ黒な液体なのですが、2週間ほど置いておいたら画像のように透明な液体と染料の部分に分離してしましまいました。※正規品は1月以上置いても分離しません。 ②商品に添付してあるシールが正規品と違いました。正規品はステッカーの角が丸くなっていますが、届いたモノは丸くなっていませんでした。 ③バーコードのナンバーが違いました。このコードはAdvancedになる前の別の製品コードになります。

Only complaint would be the price otherwise works great

艶も弾きも最高です。 耐久性はこれからですけど、今の所大丈夫そうです。