Corsair 7000D AIRFLOW schwarz

The backplate is bend and it was useless to use stock fans and I had to fix the bend to build the pc. However, it worked and lesson learned DONT BUY CASE ONLINE !

Needed bigger case due to buying a 4090 graphics card. Amazing airflow and space in this case. Z390 godlike with 9900k processor and the 4090. Temperatures compared to my precious case dropped nearly 5deg c for the processor.

Very well made case, bit over kill in places like double back door, plenty of room to put stuff,i got 420 Radiator CPU cooler and a 240 GPU cooler, 16 fans in total all runn fine, keeps the noise down because of solid materials, heavy at 18kg without anything in it, so be prepared to heavy lift (25KG) when fully built.

Ok to start with this is the best case i have ever had, also the biggest by far but it gets the job done, so there is a couple of things to know about this case, firstly is that the side fan mount only supports 4x 120mm and not 140mm fans. More than sufficient, also when i first used this case it did sound like a jet engine roaring, this was due to the built in fan splitter and my bios settings. The built in fan splitter must be powered by a sata power cable (same as the ssd to power supply cable), the issue turned out to be that the header i used for the fan was set to DC and not PCM, this meant it was firing all fans at max speed instead of a controlled curve. This one change in my bios made all the difference.Cable management has a lot of room and mounts for the fans come off completely for easy fitting of fans, just make sure when you mount the fans they are in the correct orientation and the cables are in the correct position to allow tidy cable management. You get some complimentary screws and tie wraps plus velcro cable tidies which is great, i never used a manual to figure out how to set up the case for my build as it was self explanatory and things are built in a way to make your life easier.I suggest you pick a place with a lot of space for your build as these doors open on hinges and i needed half a room to have both doors of the case open at the same time, i also found that my power supply cables were not long enough to reach things like my cpu and even my 24 pin so i did have to buy a cable extension kit to get around this. Also although i had lots of room for cable management i still found myself fighting with cables, this was due to cable extension connections being at the back, also the fact i am using a lot of fans. I moved the rear stock fan to the front so the front has 3 140mm stock fans, the rear has a noctua 140mm fan, the top has 3 noctua 140mm fans and the side has 4 120mm fans so you can imagine i am running a lot of cables. (case only comes with the non rgb 3 stock fans, the rest i bought separately)Although i needed to buy a PCU extension kit, change a bios setting, fight with cable management i will say this case is definitely worth every penny, it is very well made, strong, everything is designed to make your life easier, it looks great, it keeps my temps low on cpu and gpu and has plenty of space for anyone wishing to run a custom water loop. I only mention my building issues as i wish i knew before i started so i didn't have to wait an extra day for cables and google the hell out of the fan splitter to find it was a bios setting so i hope someone will read this and it will help them if they need it, otherwise my advice is, DEFINITELY buy this case, it is amazing!

Mainly good but slightly over engineered. Focus could have been done with it in other areas. It can be a little form over function.

This is a HUGE case but it’s Super easy to install your parts in I got the White Edition and it’s sexy

Everything a full tower should be. Extremely happy with this tower, look up a youtube review. I didnt before purchase and was shocked at how much customization this tower offerers. Space I knew, but the amount of fans and pc storage is mind blowing. Great airflow and easy to access everything, assembling the pc, dressing the wiring and cleaning dust filters.