Speed Beez® Lever Loader Compatible with Sig Sauer® P365® 9mm Magazine Loader (Does NOT Work with P365® 380!)

When I first started shooting, I had no idea that loading magazines would be the hardest part! My fingers were sore, my thumbs were bruised, and it was a slow, frustrating process. I tried to understand other speed loaders, but they looked complicated. Then I found this one—the simple, clever design caught my eye, and the reviews convinced me to try it. It has completely transformed my range days. Here’s why it’s the best on the market: Genius in Simplicity: The design is incredibly intuitive. After one or two tries, you'll be loading rounds smoothly and effortlessly. It works perfectly with my Sig Sauer P365, making a tedious task quick and even a little bit fun. The "click and load" action is so satisfying. A Total Conversation Starter: I'm not kidding—every time I use this at the range, someone asks me about it. People are intrigued by how efficient it is. I've given multiple demos, and it never fails to impress. It’s that good. Saves Your Hands: This loader eliminates the pain and strain of thumb-loading. My magazines are loaded in seconds, and I can focus on shooting instead of dreading the reload. The One Consideration: Yes, it's a piece of precision-molded plastic with a price tag that might make you pause. But think of it as an investment in your enjoyment of the sport. The time, frustration, and physical discomfort it saves you make it worth every single cent. The Bottom Line: If you own a P365 (or any of the other compatible models), do your thumbs a favor and buy this loader. It’s one of the best accessories I’ve ever purchased. It’s reliable, efficient, and so well-designed that it turns a chore into a pleasure. Stop struggling and start loading!

I'm not sure what it is with Sig generally and the P365 specifically but the magazines are crazy difficult to load, especially when they're new. The SPEED BEEZ® loader is both ingenious and effective. It is simply hard to imagine a more effective tool. The SPEED BEEZ® will allow you to load to capacity quickly and easily. My only operational notes relate to the "release" button. When releasing your magazine be sure you keep the area adjacent to the release button clear otherwise the release can't "release" your magazine. You'll be tempted to grip the SPEED BEEZ® in your hand while pressing the release but that might not work if your hand is pressing on the opposite side. Once you see what's happening it's no problem. Anyway, I cannot imagine a better loader from a purely functional standpoint. I wish Sig would make a deal with SPEED BEEZ® and supply one along with the P365. The P365 deserves a great loader!

By far the fastest and best way to load any capacity P365 mag that you have! I was blown away by how well it works! It's also great that the mag locks in so that you don't have to hold the mag against the counter top or whatever. If you have a P365, you definitely need one of these! Your thumbs will thank you!! The best $30 I have ever spent!

I picked up the Speed Beez for my P365 Fuse because I kept struggling to get the last four rounds into SIG mags. If you have SIG magazines you know the springs are stupid stiff. My thumbs were getting wrecked at the range. I often wasn't even able to get the last 2-3 rounds into the 21 round magazines. This little lever loader fixed that problem right away. It makes loading faster and way less painful. The way it holds the magazine feels secure. You slide the mag in, it clicks into place--then you flip the lever, and it clamps the mag while compressing the spring. It releases the same way the mag releases from the actual gun, with a definite, mechanical feel. That made me trust it right away because the motion is familiar and predictable. Functionally it is simple and it works. Seat the mag, pull the lever, drop rounds in, let it go, done. You get a real mechanical advantage so you are not struggling with the spring anymore. I didn't experience any slipping, no weird jams, nothing that made me stop and fix something. It lines up with the P365 mags and does not stress the feed lips or wiggle around. I did not test it on every other brand, but for the intended mags it fits like it should. Build quality is fine for a small range tool. It's made out of a nice, hard plastic. It feels solid enough to last in a range bag and the parts that touch the mag are finished so they do not gouge or mark anything. Value wise, it is worth it if you shoot a lot and you hate thumb pain. It is not expensive and it saves time and annoyance. If you go to the range a few times it basically pays for itself in saved time and comfort. I shot about 500 rounds through my new SIG the day I got it. If I didn't have this tool, there's no way I could've done that. I'd have left the range at about 100. Bottom line, if you struggle with P365 mags and want something easy that actually makes the job simpler, get one. It is not magical, it is just practical and it does what it is supposed to do.

WOW! This being compared to another very popular brand far exceeds the other brand hands down. You do not need to set this on a table surface in order to use it because the mag snaps inside of it and you can hold it in one hand while you use your less dominant hand to put the shells in the hole and then just open and shut the device with your fingers and do it again. I just hand loaded 217 round clips for my p365 and after about the 10th round I could barely get the last seven in because the spring was so so tight since they were brand new magazines. When I got this on my porch this morning I ejected all the rounds out of those 17 round clips and used this and it took on a scale of 1 to 10, 10 being maximum effort only about a two. It was very simple and it took a very light squeeze to load the entire magazine in under a minute easily all 17 rounds even the 17th round was just as easy as the first. If you need a quick easy field reloader that can get it done in under a minute on a very large capacity magazine or even small magazines that are still really stiff because they're new definitely buy this. It's worth every penny. Rugged design but very light all the same. It's not cheap feeling in any way but it's not what I would consider rugged either It's just nice and light with a very strong mechanism inside for very little effortless magazine reloading. You will love it the first time that you try to do a large capacity magazine by hand and can barely finish it off. This will save your fingertips your knuckles and everything else that can be banged and bleed lol You will love it I guarantee it. I didn't get one free for this review, I don't know this company, hell I'm actually a new shooter for that matter. I've shotguns all my life since the '80s but this is the first time I've ever bought any kind of a loader and it's truly effortless I was laughing when I did it because I was so amazed at how easy it was compared to doing it by hand and struggling very badly to get it done and fully loaded. You definitely want this with you in the field even if you preload a few mags and plan to shoot it all afternoon You're going to use the heck out of this thing and love every round that you load I guarantee it not that that my word means anything but there you have it. If you're looking at a reloader this is the one to get by far.

I love my Sig. My magazines, on the other hand, have mostly gone 2 light since I bought it. I hate trying to load them and most of the time I just stop at "full enough". My friend bought a Sig after he shot mine and, when he did, he got this shortly after. Loading one of my magazines with it was all it took. I went home and, a few days later, ordered one for myself. It's well made. It's portable. It makes loading a magazine full easier than loading half as much by hand. It works smoothly, requiring a little effort toward the end; but, ultimately taking 99% of the work out of it. Maybe, after a few more uses, I'll find some nitpicks or small improvements that could be made (I do wish it worked with more of my magazines than just my Sig's); but, this is one of those "unicorns"... a "perfect product". It sets out to do a job (that, arguably, shouldn't be necessary) and nails every aspect of the task. If you have a Sig, it's practically a required accessory.

It worked as advertised. I was surprised because the Sig factory magazines have significantly-tight springs. It only had one hiccup in the first four magazine's I loaded. I solved that myself easily by taking the magazine out of the Speed Beez and reinserting it. I can't wait to use it at the range.

Holy crap what an improvement to the loading experience. I just a p355 and the springs start out super strong. For reference I’m. 205lb rock climber and while I’m no beast I don’t have weak hands. I had major difficulty getting my mags loaded. I 3d printed a speed loader but it was still no easy task and that would often cause binding on the follower which would get stuck in the release holes. It also still took me a couple minutes to load a 10 round mag. With the speed breeze it’s soooo much easier. I love that it actually clips in so you know the mag is solidly positioned. The scissor action held me know that the previous round is pushed down and ready to accept another one, and then solidly pushes the new one back into place. No more issues with stuck followers or misdeeds. The leverage makes it take so much less effort and dexterity. And it’s so much quicker. I can insert a mag load 10 rounds, and release the mag in 23 seconds consistently. The only downside I see to this is that it’s specific to p365 mags but it’s just so much easier to use (and it’s the only model I own) that I don’t care at all. Seriously impressive and feels like it should be more common.