Diablo 8" x 42-Teeth Steel Demon Cermet II Metal Cutting Saw Blade – Up to 25X Longer Life, 10X Faster Cuts, 50X Cooler Operation, Triple Chip Grind – D0842CF

Best blade around. Stays sharp and the teeth dont fall off like cheap blades. I cut a lot of stainless and tubing, no issues after thousands of cuts.

The Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade is a game-changer for anyone working with ferrous metals, such as steel, iron, and other tough materials. As a DIY enthusiast and metalworker, I recently had the opportunity to use this blade extensively, and I must say that it has exceeded my expectations in every aspect. In this comprehensive review, I will discuss its design, performance, durability, and overall value. **Design and Build Quality:** First and foremost, the design and build quality of the Diablo D1260CF are outstanding. The blade features a 12-inch diameter, making it versatile for a variety of cutting tasks. It's constructed using Cermet II carbide teeth, a high-quality material known for its incredible durability and heat resistance. The blade is also equipped with 60 teeth, which are specifically optimized for cutting through ferrous metals. The teeth are razor-sharp, ensuring precise and clean cuts every time. The design of the blade incorporates laser-cut stabilizer vents, anti-vibration technology, and Perma-SHIELD non-stick coating. These features collectively reduce heat buildup, minimize warping, dampen vibrations, and prevent corrosion, all of which contribute to a longer blade life and superior performance. It's evident that Diablo has invested in thoughtful design to deliver a blade that's both efficient and durable. **Performance:** The performance of the Diablo D1260CF is where it truly shines. Cutting through ferrous metals has always been a challenge, but this blade effortlessly slices through them like a hot knife through butter. I was impressed by the smoothness of the cuts and the lack of sparks or excessive heat generation. It delivers burr-free and virtually no-rework cuts, which is crucial for precision metalworking. One of the standout features is the blade's ability to maintain consistent speed and accuracy even when cutting through thick or dense materials. The carbide teeth stay sharp for a prolonged period, reducing the need for frequent blade changes. This not only saves time but also minimizes the cost of replacing blades frequently. The anti-vibration technology ensures a stable and quiet cutting experience. This is a significant advantage, especially for extended cutting sessions, as it reduces operator fatigue and enhances safety. **Durability:** Durability is a vital factor when considering any cutting tool, and the Diablo D1260CF doesn't disappoint. The Cermet II carbide teeth are exceptionally hard and resilient, and the blade's overall construction makes it highly resistant to wear and tear. Even after extensive use on various ferrous materials, the blade remained sharp and in excellent condition. The Perma-SHIELD non-stick coating not only aids in preventing corrosion but also reduces friction, extending the blade's lifespan. This protective coating also keeps the blade clean, which is a plus for easy maintenance. **Value and Conclusion:** In conclusion, the Diablo D1260CF 12-inch Steel Demon 60T Cermet II Carbide Ferrous Metal Saw Blade is a top-tier cutting tool designed for professionals and DIY enthusiasts alike. Its remarkable design, outstanding performance, and exceptional durability make it an indispensable addition to any metalworker's toolkit. While it may be a bit pricier than some alternatives, the long-term cost-effectiveness and the quality of cuts it delivers make it a worthwhile investment. If you frequently work with ferrous metals and demand precision, efficiency, and durability from your saw blade, the Diablo D1260CF is a stellar choice. It has consistently proven its ability to cut through tough materials with ease while maintaining its sharpness and integrity. I highly recommend this saw blade to anyone seeking a reliable and high-performance tool for ferrous metal cutting applications.

I have an Evolution metal cutting saw that I purchased recently. In the past I have always used a grinder or chop saw with an abrasive blade to cut metal but I was introduced to cold saws about 5 years ago and immediately fell in love with them. They cut quickly, don't make sparks, dust and a mess like abrasive blades do and you can handle the steel immediately without worrying about burning your hand. The biggest drawbacks to these cold cut saws are the blades as they are much more expensive than an abrasive blade and if not used correctly can dull rather quickly. The blade that came with my saw was a multi-material blade which worked fairly well but became dull rather quickly after I cut some stainless steel. I was going to replace it with another Evolution blade that was specifically designed for ferrous metals but in looking around on YouTube found a guy on who had tested many blades and this Diablo came out as one of the best for overall performance. I've used Diablo blades in the past for wood working and was always happy with their performance so I decided to try this one. I've only made about a half dozen cuts so far (on 14 gauge square tubing) but the blade cut quickly, accurately and generated very little heat so so far so good. The biggest question, however, is the one I can't answer yet which is longevity. Will this blade be junk 10 cuts from now or is it going to last for a while? I'll have to reserve commenting on this till I use it more and then update my review but at this time I'm quite pleased.

I have purchased this blade 3 times now - for the purpose of cutting 1/8"x1" stainless steel (304). I have tried cutting stainless with other blades and this one is hands down the best I have used. First - you must have a metal cold saw with RPM less than 2000. If you try to run this on a high speed chop saw, it won't work well and you can't make it work. Second - you must recognise that there are phases of the cut and you need to moderate the down pressure to make the blade last. When cutting stainless steel, the starting cut is through the hard surface of the material and once that surface is penetrated, you need to increase the down pressure to make the cut go faster, about 50% or so increase does the trick. Part of the cooling process is to cut fast enough so that the chips carry the heat away. If you go too slow, you will burn up the blade. If you go too slow, you will see more and more sparks and that is bad because it isn't the material sparking, it is the blade. So - how many cuts did I make? On the first blade, I got about 300 cuts before I wore the blade out. I tried other carbide blades that I had to try to finish the remaing 60 cuts - nothing held up. I bought another 2 blades and started on the next 360 cuts. With the modification in cutting technique, the second blade made all 360 cuts and is now cutting nice and cleanly for mild steel - the blade is still going and the cuts are smooth.

Metal-cutting blade for a Skil saw—gets the job done. This blade’s pretty solid. Like most metal blades, it throws sparks when cutting, so keep that in mind. It’s best for straight-line cuts—don’t expect it to handle curves or finesse work. I slapped it into a Skil saw to cut up an old metal roof into 11-foot sections so I could haul it off. It held up well and got the job done. One thing to watch out for: blade thickness. Most Skil saws only take thinner blades, so if it’s too thick, it won’t seat properly. This type of blade is pretty much the only kind that’ll fit a Skil saw for metal work, so when you’re shopping, pay close attention to the width. Too thick and you’re out of luck.

These blade are fantastic for cutting steel. Just don't cat as fast and it will last very well. Highly recommended! I use it on steel, aluminum and PVC. It is also a great value.

Diablo are the best blades

These are a disappointment by the highest standard. I love Diablo but these are trash they cut amazing for about 10 cuts. On 11 might as well be cutting with a napkin. Very thin blade so they deflect like crazy if your doing very thin might last 20 cuts but 1/4 inch production isnt worth the money in the slightest i bought 2 blades and burnt both of them up in 1 week on a flatbed for a truck. Not even w9rking them hard