Lipo Battery Charger, 1S-6S Balanced Charger Discharger, 1-6S Lipo Li-ion NiMH NiCD Li-Fe Battery with Tamiya XT60 Deans Futaba Connector

and it works as advertised

I don't normally post reviews but for this, I had to. For the money, this is a pretty nice and solid unit. It has that weight of something that has quality. It will charge to the parameters set and slowly lower the amps near full charge. You can program it to many common presets, including the rest time, shutoff limits and just about anything you can ask for. It even performs a battery test before charging. Comes with temperature protection, but you need to buy a temp probe. It does not come with any. However it does give a few options of sensors that are compatible, so it's not a big deal. Menus are a little confusing at first if you don't start with the manual. New toy, have to see it work first, I get it. Did the same thing. Very pleased with my purchase.

Has worked well from the time I have had it. The features are very good for safety since it won't begin charging if it detects a break in the wiring or an incorrect battery type. Easy to use, compact size, and for the money it gets the job done reliably albeit slower than probably some higher priced chargers

This charger can do it all and do it well. I do, occasionally, have to look up the instructions on it. There's YouTube videos out there. I don't think you'll find instructions on this one, specifically, but it's an "IMAX B6" clone, using the same setup and hardware. Instructions for those will work on this. It also doesn't come with an XT30 cable, so I also had to buy a T-Plug to 4.0mm Banana Cables and some T-Plug to X30 connectors. It's easy to make an appropriate patch cable. It's all very plug and play.

Works for all battery sizes, more complicated but does the job.

For the money you wont find a better charger. This thing does all batteries ive come across. If you need a charger that one kill your wallet this is the 1 !

CON: Proper battery charging cables NOT provided ! See below. The temperature probe is not includes ! The temperature probe is not mentioned and where do I get on if I want it, and I do want it ! Manual is NOT on the web page so did not know the temp probe is OPTIONAL ! Hey all providers, put the full manuals on the web !!! The charging explanation, even in the manual is NOT clear. Also this balanced charge thing is not explained ! And what charge rate is appropriate of each type of battery ? I am totally new to this type of charger. Bought it while I also purchased LiPo hobby battery packs. I will buy a stainless steel tray to put this and the battery pack on to help suck the heat out of the battery while charging since I have now no other way of determining the battery temperature and what i would hope is a over temp cutoff in the charger. Well ? So where is the temperature probe ??? PROS: WOW ! I recovered my old seemingly dead NiMh 7.2 3Ahr hobby battery. First attempt failed and only provided a 10% charge. I saw the charger cycle and try to get the battery going. I ran it in my model and it did provide 5 minutes of service. Then I tried charging again and it took 96 minutes (what is expected for the 1C charge rate I selected). Now fully charged. Nice. =============== Now trying to charge my LiPo 7.4 v hobby battery. NO CHARGE CABLE PROVIDED so I had to improvise to connect it. Why no cable ! Doing 1C (6A) balanced charge. Make sure you set the charger for the LiPo and the battery pack voltage, and max current (1C) and set for balanced if you have a connector on the battery for a balanced charge.

Excellent Charger with all the features you need.

Este cargador funciona muy bien y carga todo hasta 6S, pero produce solo 80W, entonces es lento para cargar 5S y 6S. Es mejor para 4S y menos. También nota que no carga 1S aunque dice en la descripción. Solo 2S hasta 6S, que es lo normal paracargadores.

Nice, works great

Works perfectly, doesn't get very hot, even charging 6s batteries at 5 amps.

Awesome charger. It has all the options and charger settings you will need (standard charging, balance charging, fast charging, storage charging, and discharging) with adjustable amperage for all the charging settings. It has adapters for multiple different battery connections

It's alright, it'll charge your batteries but very picky about low voltage cells. Seems like anything lower than 3.79 and it starts crying about low voltage and won't charge your battery. So that kind of sucks. Other than that it works fine and can balance charge, fast charge and storage charge/discharge. Maybe there's a setting somewhere to chage the low cell range but I couldn't find it. Ended up getting a better one though and saved some of those low voltage batteries...